AC Master 24/2000 Inverter (US plug) - 120 V

The Mastervolt AC Master 24/2000 US (120V) inverter converts a 24V DC voltage from a battery into a stable 120V AC supply. It provides a pure sine wave output, which is critical for the operation and protection of sensitive electronic equipment.

This inverter delivers a continuous power output of 2000 W at an ambient temperature of 40°C, with a power factor of 1.

Yes, the inverter can handle peak loads. It can supply a maximum power of < 2300 W for 1 minute and < 3500 W for 1 second.

This inverter achieves 93% efficiency, ensuring optimized power conversion.

The inverter dimensions are 248 x 443 x 83 mm (Height x Width x Depth) or 9.8 x 17.4 x 3.3 inches. Its weight is 5.24 kg.

The inverter is equipped with an automatic energy-saving system. This mode can be activated via DIP switch 4. It reduces power consumption when there is no load to extend battery life. The energy-saving mode charge thresholds are a minimum of 20 VA and a maximum of 110 VA.

In normal mode (ON), standby power consumption is < 1.0 A @ 24 V. In power-saving mode, standby power consumption is < 0.05 A @ 24 V.

The typical harmonic distortion of the output voltage of the Mastervolt AC Master 24/2000 US inverter is < 5%, ensuring a high-quality pure sine wave.

Output voltage can be selected between 100, 110, 115 or 120 Vac (± 3%) using DIP switches 1 and 2. Output frequency can be set to 50 or 60 Hz (± 0.5%) via DIP switch 3.

Yes, this inverter includes galvanic isolation, which improves safety and power quality by electrically isolating the input and output circuits.

This inverter is designed to operate with a nominal battery voltage of 24 V.

The inverter provides an AC output voltage of 120 V. It is equipped with a North American GFCI outlet.

Yes, the Mastervolt AC Master 24/2000 US (120V) inverter is specifically designed for the North American market, providing 120 V output and featuring a North American GFCI AC outlet.

The inverter shuts down when battery voltage drops to 21.0 V and restarts at 25.0 V. It shuts down when battery voltage exceeds 33.0 V and restarts at 29.0 V.

For a secure installation, the chassis ground terminal of the AC Master must be connected to the central ground point of the vehicle or boat.

For a 24 V, 2000 W model, the minimum recommended DC cable cross-section is 35 mm² / 2 AWG. It is critical to ensure cables are not too long or have too small a cross-section to avoid voltage drops.

The inverter can operate within an ambient temperature range of -20°C to 60°C. However, derating occurs above 40°C (at 60°C, power is reduced to 40%).

Yes, it is possible to connect a remote control panel or a remote switch to the inverter. The remote control terminal also provides an alarm contact (dry contact) and a remote switch function.

It is imperative never to use the AC Master in an area where there is a risk of gas or dust explosions. Ensure adequate ventilation to prevent overheating.