Cable Y Raymarine A102146 pour modules de sonde CHIRP CP470 et CP570

Free pickup point from €150 in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

thanks to our network of approved installers

Find an installer

Support service

Opt for additional installation assistance

Save 13%

Raymarine

A102146

Raymarine Y-cable CP450C/CP470/CP570

Conçu pour les modules sondeur CHIRP Raymarine CP450C, CP470 et CP570, le câble Y A102146 permet de connecter deux transducteurs à un seul module, étendant les capacités de détection sous-marine. Il s'agit d'une pièce de rechange essentielle pour optimiser les installations professionnelles. Inclus : 1x Câble Y Raymarine A102146.

Retail priceBenefit from the professional rate

52,44€

52,44€ ~~60,00€~~

Shipping calculated at checkout.

Prices shown excluding VAT for United Arab Emirates. If your delivery address is in the European Union, the VAT of the destination country will be added at checkout.

Available in stock

Free pickup point from €150 in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

thanks to our network of approved installers

Find an installer

Support service

Opt for additional installation assistance

Technical specifications

Connector type	Raymarine proprietary depth sounder connector
Cable type	Fishfinder cable
Cable length	0.5
Compatible network	Proprietary fishfinder connection
Ingress protection	IPX6
Certifications	CE
Product type	Cable
Compatible models	Raymarine CP470, Raymarine CP570

Detailed description

Raymarine cable A102146 is an essential accessory designed to extend the capabilities of the CHIRP fishfinder modules CP450C, CP470 and CP570. This cable allows you to connect two transducers to a single fishfinder module, optimizing coverage and flexibility for your underwater detection system. It is required for setups that need simultaneous use of multiple transducers, for example to combine different frequencies or beam angles.

Integration and performance

Specifically designed for Raymarine CP450C, CP470 and CP570 modules, this Y-cable ensures perfect electrical and mechanical compatibility. The CP450C, CP470 and CP570 modules are known for their top-tier CHIRP performance, delivering target discrimination and seabed resolution. Adding the Y-cable enables full use of these technologies by allowing advanced transducer configurations, where more basic systems such as a Dragonfly or an Element would only allow a single direct connection.

Installation flexibility

This Y-cable provides a solution for complex installations where access to the modules is limited or when you want to maximize sonar data from multiple points. It is a specific spare part for Raymarine’s professional fishfinder module range, distinguished from generic accessories by its design and integration within the Raymarine ecosystem. It is intended for users seeking greater modularity in their CHIRP fishfinder system.

Expert opinion

Pol CONIN

Digital Manager

« Dual-transducer integration for CP450C, CP470 and CP570 »

The Raymarine A102146 cable is a key technical component for demanding CHIRP CP450C, CP470, and CP570 fishfinder installations. Its practical value lies in enabling the integration of two transducers on a single fishfinder module. This setup is particularly relevant for vessels requiring diversified sonar coverage, such as simultaneous use of a high-frequency transducer for structure detection and a low-frequency transducer for deep-water depth and fish finding.

In installation scenarios, this cable is essential when only one CP450C, CP470, or CP570 module is available but the operator wants to benefit from two separate transducers—for example, a hull-mounted and a transom transducer, or two transducers optimized for different depths. It simplifies wiring by avoiding the addition of a second complete fishfinder module, providing space and cost advantages over a dual-module solution. Ensure the transducers considered are compatible with the frequencies supported by the CP450C, CP470, or CP570 modules to guarantee optimal performance.

Durabilité

Facilité d'installation

Rapport performance / prix

Payment and security

Your payment information and data are processed securely.

Raymarine Y-cable CP450C/CP470/CP570

52,44€

52,44€ ~~60,00€~~

Frequently Asked Questions

Need help? Contact us

What is the Raymarine A102146 Y cable used for?

This Y-cable is an essential accessory designed to extend the capabilities of the Raymarine CHIRP CP470 and CP570 fishfinder modules. It allows you to connect two transducers to a single fishfinder module, optimizing coverage and flexibility in your underwater detection system.

Which Raymarine fishfinder modules is this Y-cable compatible with?

The Y cable A102146 is specifically designed to be compatible with Raymarine CP470 and CP570 CHIRP professional fishfinder modules.

Can I connect two transducers with different frequencies using this Y-cable?

Yes, one of the main advantages of this Y-cable is that it allows advanced configurations, including the simultaneous use of multiple transducers with different frequencies or beam angles for better coverage.

Is this cable compatible with Raymarine Dragonfly or Element fishfinders?

No, this Y-cable is not compatible with basic fishfinder systems such as Raymarine Dragonfly or Element. It is specifically designed for professional CHIRP fishfinder modules CP470 and CP570.

What is the advantage of using a Y-cable for my CHIRP fishfinder system?

Using the Y-cable allows you to optimize coverage and flexibility in your fishfinder system by connecting two transducers to a single module. This enables advanced configurations, such as combining different frequencies or beam angles, to maximize sonar data and improve target discrimination as well as seabed resolution.

How is the Raymarine A102146 Y cable installed on my depth sounder module?

The Y-cable connects to the input of the Raymarine CP470 or CP570 fishfinder module. Both 'Y' ends of the cable are then connected to the two transducers you wish to use. It ensures perfect electrical and mechanical compatibility with these modules.

Can this Y cable be used with transducers from different brands?

This Y-cable is a specific spare part for Raymarine's professional fishfinder module range and is designed for optimal integration within the Raymarine ecosystem. To ensure maximum performance and compatibility, it is recommended to use it with compatible Raymarine transducers.