48V 60Ah Service Battery

Solid-state technology does not use a flammable liquid electrolyte, making it completely safe against fire risks. Additionally, it offers an energy density twice that of a standard lithium iron phosphate (LFP) battery, allowing for much more energy storage in a lighter and more compact format.

Yes, these batteries can be connected to increase the capacity or voltage of your bank. The manufacturer allows configurations up to 2 in series and 4 in parallel (2S4P). Ensure you use cables of the appropriate cross-section and fully charge each battery before connecting them.

Yes, this battery can power a 48V system, provided your propulsion requirements are compatible with its specifications. It can deliver a continuous discharge current of 60A. For an electric motor, verify that the controller and current draw of your installation remain within this operating range.

Yes, unlike conventional lithium batteries that require internal heating elements, this solid-state battery allows charging and discharging down to -20°C (-4°F). The battery management system permits use in extreme winter conditions.

The battery has native Bluetooth connectivity. Simply download the free SSM Battery Monitor HP app on your smartphone (iOS or Android) to monitor the charge state, voltage, current, and temperature of your cells in real time.

Yes, although the base model communicates via Bluetooth, specific variants are available with advanced communication protocols. You can choose NMEA 2000 integration options, CAN network, RS-485, or direct compatibility with Victron equipment to display data on your chartplotter.

The terminals use M8 bolts. It is imperative to use a torque wrench and tighten the connections with a torque between 10 and 12 Nm. Hand tightening is insufficient and could cause overheating or damage to the terminals.

This battery is designed to offer exceptional longevity, guaranteeing over 3,000 cycles with a 100% depth of discharge. Thanks to its passive balancing system and advanced BMS, it maintains excellent performance over many years of intensive use.

Yes, the ABS housing of the battery has an IP67 protection rating. This means it is fully protected against dust and can withstand temporary immersion in water, making it perfectly suited to damp marine environments.

The BMS (Battery Management System) acts as the protective brain of the battery. It continuously monitors each cell to prevent overvoltage, undervoltage, overheating (cutoff at 65°C), and short circuits (protection up to 1000A). It also manages cell balancing during charging.

Yes, the battery is delivered with a partial charge level due to transport constraints. It is critical to recharge it to 100% using a suitable charger before connecting it to your system or pairing it with other batteries to ensure perfect cell balancing.

Yes. It is designed as a direct replacement and complies with the standard BCI Group 27 format. You will gain significantly in space and weight while benefiting from a 100% usable discharge capacity, compared to only 50% for traditional lead-acid batteries.

For long-term storage, charge the battery between 30% and 80% of its capacity, then disconnect all cables to avoid parasitic discharge. Store it in a dry, clean place. It is recommended to perform a charge cycle every 3 to 6 months to preserve cell health.

Solid-state marine batteries offer absolute safety as they contain no flammable liquid electrolyte, eliminating fire risks. Additionally, they provide exceptional energy density: this 3024 Wh model weighs only 12.7 kg, half the weight of a standard lithium battery. Finally, they can operate in extreme temperatures, allowing charging and discharging down to -20°C without requiring an internal heating system.

You must use a charger configured with a lithium battery profile. The charging cycle requires a constant current until reaching a voltage of 58.8 V, followed by a constant voltage charge. The recommended standard charging current is 20A, with a maximum tolerated current of 30A. The integrated Battery Management System (BMS) automatically protects the battery and cuts off charging if the voltage exceeds 58.8 V or if the temperature falls outside the safe operating range.

Yes, the battery natively includes Bluetooth connectivity. You can monitor charge status, voltage, and other parameters in real time via the free SSM Battery Monitor HP app (available on iOS and Android). For deeper integration, battery variants are available with advanced communication protocols such as NMEA 2000, CAN network, RS-485, or Victron, allowing you to display data directly on your chartplotter or centralized management system.