ST Blade fuse block kit for battery terminal mounting

The ST Blade Blue Sea 5024-BSS fuse block kit is designed to easily add up to four protected electrical circuits directly to a battery terminal. It allows powering new accessories on a boat or vehicle without complex modifications to the existing wiring.

The 5024-BSS kit includes the fuse block, four insulated nylon ring terminals for 16-14 AWG wires, four insulated nylon ring terminals for 12-10 AWG wires, and four write-on labels to identify circuits.

No, fuses are not included with the kit and must be purchased separately.

This fuse block is compatible with ATO or ATC type fuses.

The maximum operating voltage supported by this fuse block is 32V DC.

The fuse block can handle a maximum current rating of 100A for the entire block, and 30A maximum per individual circuit.

The internal bus is made of tinned copper C11000, ensuring optimal conductivity and corrosion resistance.

Yes, the fuse block is ignition-protected and compliant with ISO 8846 and SAE J1171 standards, making it suitable for use in gasoline engine compartments.

Yes, the block is fitted with an insulating cover that meets ABYC/USCG insulation requirements.

The fuse block has a width of 91.3 mm (3.59"), a depth of 56.7 mm (2.23"), and a height of 43.8 mm (1.73"). The mounting hole allows clearance for a 3/8" (M10) stud.

The fuse block is mounted directly on the battery terminal stud. It is designed for a 3/8" (M10) stud clearance.

#8-32 screw terminals with captive washers are used to secure the wires.

Mount the fuse block on the battery terminal stud (3/8" or M10). Connect the wires from your accessories to the #8-32 screw terminals, using the provided insulated ring terminals if necessary. Insert the appropriate ATO or ATC fuses (sold separately) for each circuit. Use the provided write-on labels to identify each circuit. Ensure the insulating cover is properly installed.

The nylon insulated ring terminals are included for each screw terminal to facilitate secure wire connections. Their use is recommended for optimal installation, but the necessity may depend on the type of wire used.

Yes, this fuse block is ignition-protected and designed to be safely used in a gasoline engine compartment.

The fuse block is compatible with battery terminal studs with a 3/8" (M10) clearance.

No, this fuse block is specifically designed for use with ATO or ATC fuses only.

Yes, since the maximum operating voltage is 32V DC, this block is compatible with 12V DC and 24V DC electrical systems.

Yes, the kit includes four writable labels that allow you to identify circuits according to your specific needs.

Yes, model 5023 is the fuse block only, without insulated ring terminals or write-on labels. Model 5024-BSS is the kit that includes these accessories.