JL Audio M200 10" subwoofer enclosure, white with LED
Prices exclude import taxes. DAP delivery: import taxes are paid on delivery.
Awaiting restock
Technical specifications
Technical specifications
| Source type | Subwoofer |
| Speaker Diameter In | 10 |
| Audio Output Power Rms | 250 |
| IP rating | IPX6 |
| Color | Blanc |
| Body diameter | 222 |
| Enclosure Type | Infinite baffle |
| Impedance | 4 |
| Led Fuse Rating Ma | 500 |
| Installation cutout diameter | 222.5 |
| Mounting Depth | 131 |
| Mounting Screw Hole Diameter Mm | 2.78 |
| Mounting type | Encastré |
| Overall diameter mm | 275.4 |
| Rgb Light Wire Colors | Rouge, Vert, Bleu |
Detailed description
Detailed description
Marine M200 subwoofer with infinite baffle
The reference 010-04759-00 includes a JL Audio M200 subwoofer with a nominal 10" size, white Sport grille, and RGB LED lighting. This is a flush-mount speaker, not a pre-assembled sealed enclosure.
Audio and rear volume
The speaker accepts 250 W RMS at 4 ohms, with a sensitivity of 86 dB at 1 W/1 m. The recommended amplifier power is 250 W. The cone is made of injection-molded polypropylene.
The infinite baffle design uses a large air volume behind the speaker: the datasheet specifies 56.6 liters and recommends keeping this space empty. A dedicated sealed enclosure is possible according to the recommended dimensions, with 56.66 liters of net internal volume; the volume displaced by the speaker and reinforcements must be added to calculate the gross internal volume. Use of a ported enclosure is not recommended.
Marine flush-mount
Allow for a cutout of 222.5 mm and a mounting depth of 131 mm. The outer diameter is 275.4 mm; the rear body measures 222 mm in diameter, and the front face extends 47.1 mm beyond the mounting surface. Maintain a 295 cm compass distance.
The IPX6 rating applies to front-face protection when the speaker is properly installed. The rear, wires, and connections are not waterproof: protect them from moisture. In areas exposed to water or weather, mount on a vertical surface. Outside the boat, install well above the waterline.
LED lighting
The RGB LEDs operate on 10 to 14.4 V DC, with a maximum current of 220 mA at 14.4 V DC. Garmin recommends a Spectra controller, sold separately. A static color can also be achieved by a protected connection to a 12 V DC source.
Always install a 500 mA fast-blow fuse on the LED positive wire at the power source end, in a marine fuse holder. This remains mandatory even with a controller. For direct wiring, also use an isolation switch or circuit breaker. Use the provided harness and disconnect the audio power before making connections.
Box contents
- One subwoofer and one white Sport grille.
- One 6.3 mm and one 4.7 mm female spade connector.
- One waterproof 4-pin connector.
- Mounting screws and documentation.
Expert opinion
Expert opinion
« Conseil Skysat : réserver le volume arrière et protéger les LED »
Your payment information and data are processed securely.
