M3-650VeX-Mb-S-Gm Marine Tower Speakers

The physical dimensions of the JL Audio M3-650VeX-Mb-S-Gm speakers are as follows:

Enclosure diameter (A): 7.03 inches / 179 mmEnclosure depth (B): 6.16 inches / 156 mmHeight including mounting bracket (C): 7.27 inches / 185 mmMounting bracket / enclosure offset (D): 0.20 inch / 5 mm

Each JL Audio M3-650VeX-Mb-S-Gm speaker can handle a continuous RMS power of 60 W per channel.

It is recommended to use an amplifier providing between 20 and 120 W RMS per channel for these speakers.

The nominal impedance of the JL Audio M3-650VeX-Mb-S-Gm speaker system is 4Ω.

The system's frequency response is 100 Hz to 25 kHz ± 3 dB.

Installing these speakers requires the use of JL Audio® mounting brackets, which are sold separately. No other installation method should be attempted.

Yes, adjustable control of RGB LED lighting can be achieved using an RGB lighting controller, which is sold separately. For optimal performance, the use of the JL Audio marine lighting controller (MLC-RW) is recommended.

For models equipped with LEDs, the LED lighting wires are as follows:

Red: Negative (–) LED RGB RedGreen: Negative (–) LED RGB GreenBlue: Negative (–) LED RGB BlueYellow: Positive (+12V) main LED RGB

The current draw of the LED for the M3-650VeX-Mb-S-Gm speakers is 108 mA at 12V DC.

A fast inline fuse must be installed at the power source end of each yellow wire (+12V) for the LED speaker power connection. The recommended fuse rating is 150 mA.

The voltage range for LED power supply is 10 to 14.4V DC.

No, it is imperative not to connect these speakers to 24V electrical systems.

Use a minimum 16 AWG wire for each LED circuit connecting the speakers.

The LEDs are permanently fixed. Attempting to remove them will cause damage not covered by the warranty.

By wiring the wires directly, you can obtain up to seven different LED color combinations:

Red: Red Wire
Green: Green Wire
Blue: Blue Wire
Yellow: Red and Green Wires combined
Pink: Red and Blue Wires combined
Aqua: Green and Blue Wires combined
White: Red, Green, and Blue Wires combined

No, it is recommended not to connect the LED lights of the speakers to the boat's navigation lighting circuits.

The system efficiency for JL Audio M3-650VeX-Mb-S-Gm speakers is 89.5 dB at 1 W / 1 m.

The M3-650VeX-Mb-S-Gm speakers are supplied with two Lexan logo appliqués.

To correctly install the M3-650VeX-Mb-S-Gm marine tower speakers, it is mandatory to use JL Audio® mounting brackets (sold separately). No other installation method should be attempted to ensure safety and proper operation of the product.

It is strongly recommended to have your speaker systems installed by a certified JL Audio dealer, as professionals have the tools and experience required for proper installation.

Yes, the M3-650VeX-Mb-S-Gm speakers are equipped with an integrated RGB LED multicolor lighting system for vibrant accent lighting.

For adjustable RGB lighting control, an RGB lighting controller (sold separately) is required. JL Audio recommends using their MLC-RW marine lighting controller for optimal performance.

Alternatively, you can wire individual wires or a combination of wires to achieve up to seven different LED color combinations. The colors available via direct wiring are:

Red: red wireGreen: green wireBlue: blue wireYellow: red and green wires combinedPink: red and blue wires combinedAqua: green and blue wires combinedWhite: red, green, and blue wires combinedSpecific wiring connections for each speaker are required for LED functionality.