Coude / support de barre Raymarine D011 76 mm

Free pickup point from €150 in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

thanks to our network of approved installers

Find an installer

Support service

Opt for additional installation assistance

Save 20%

Raymarine

D011

76 mm Elbow

The Raymarine D011 elbow, with a 76 mm diameter, is a conduit connection accessory designed for marine systems requiring a pipe run deviation. It routes 76 mm pipes or cables, ensuring clean and functional integration. This component is sold individually with no additional accessories specified.

Price excl. import taxesBenefit from the professional rate

£45.36 GBP

£45.36 GBP ~~£56.70 GBP~~

Shipping calculated at checkout.

Prices exclude import taxes. DAP delivery: import taxes are paid on delivery.

Available in stock

Free pickup point from €150 in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

thanks to our network of approved installers

Find an installer

Support service

Opt for additional installation assistance

Technical specifications

Mounting type	Connection
Compatible models	76 mm conduit systems
Product dimensions	Inner diameter 76 mm
Installation type	Online
Kit contents	1x 76 mm elbow
Product type	Connection accessory

Detailed description

The Raymarine D011 is a 76 mm tiller arm elbow bracket for Raymarine tiller drive autopilots.

Cylinder height correction

This part compensates for a height difference between the tiller arm and the cylinder’s fixed point, ensuring the pushrod operates along a clean axis. In the Raymarine 87279-3-EN manual, the D011 measures 76 mm when the pushrod is below the tiller arm, and 102 mm when the pushrod is above it.

Tiller arm bracket

Choose the bracket to preserve cylinder alignment and avoid stress loads. It must be used with Raymarine mounting accessories only if cockpit dimensions require it.

Skysat advice

Measure the vertical offset before ordering. If the issue is the fore/aft distance between the cylinder and the tiller arm pin, select a D003 to D008 pushrod extension instead.

Documentation

Type	Nom
	EN - Raymarine Tiller Pilot Installation Manual

Expert opinion

Durabilité

Facilité d'installation

Rapport performance / prix

Payment and security

Your payment information and data are processed securely.

76 mm Elbow

£45.36 GBP

£45.36 GBP ~~£56.70 GBP~~

Frequently Asked Questions

Need help? Contact us

What is the purpose of this Raymarine bracket/elbow?

The D011 part corrects the height between the tiller and the autopilot ram. It helps keep the pushrod in a horizontal axis without stress.

When is a bracket/elbow required?

This type of part is required when the tiller is not at the correct height relative to the ram. The reference depends on the measured vertical offset.

Which code corresponds to this reference?

In the Raymarine manual, D011 corresponds to 76 mm when the pushbutton is below the tiller, and 102 mm when it is above the tiller.

Which autopilots is it compatible with?

This type of mount is used on Raymarine tiller drive autopilot installations, including ST1000/ST2000 and Evolution Tiller Drive models, depending on cockpit geometry.

How to choose between D009, D010, D011, D159 and D160?

Measure the vertical offset between the actuator shaft and the tiller, then select the reference whose dimension matches the Raymarine table.

What is the difference compared to a D003 to D008 tiller extension?

The bracket/elbow adjusts the tiller height. An extension rod adjusts the longitudinal distance between the cylinder's fixed point and the tiller.

Should the tiller be drilled?

Installation depends on the boat and autopilot. Follow the Raymarine manual and check dimensions before any drilling or permanent mounting.

What to do if unsure about the chart datum?

Measure the cylinder position, the tiller height, and the intended anchoring point. Skysat can help select the correct reference based on these measurements.