Free pickup point from €150 in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

thanks to our network of approved installers

Find an installer

Support service

Opt for additional installation assistance

Save 10%

Raymarine

A80247

RayNet to RJ45 Cable - 100mm

The Raymarine A80247 RayNet to RJ45 cable (100mm) enables integration of your RayNet network with standard Ethernet RJ45 devices. This compact solution is designed for short connections, simplifying diagnostics or network access. It is supplied alone, without accessories.

Retail priceBenefit from the professional rate

£51.28 GBP

£51.28 GBP ~~£57.46 GBP~~

Shipping calculated at checkout.

In stock

Free pickup point from €150 in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

thanks to our network of approved installers

Find an installer

Support service

Opt for additional installation assistance

Technical specifications

Connector type	RayNet (male) / RJ45 (female)
Cable type	Network cable
Cable length	0.1
Compatible network	RayNet, Ethernet
Wired network	Ethernet
Operating temperature	-15°C to +55°C
Storage temperature	-20°C to +70°C
IP rating	IPX6/IPX7
Certifications	CE, IEC 60945
Product type	Wiring accessory
Compatible models	Raymarine multifunction displays (Axiom, Element, etc.), Quantum radars, and any Raymarine device with a RayNet port.

Detailed description

The Raymarine RayNet to RJ45 100mm cable (part number A80247) is an essential adapter for integrating marine navigation systems. Designed to facilitate connectivity between Raymarine’s RayNet ecosystem and standard Ethernet RJ45 networks, this 100mm cable provides a compact solution for installations requiring a short, direct connection.

Connectivity and compatibility

This cable links a RayNet device, such as an Axiom multifunction display or a Quantum radar, to equipment with an RJ45 port. This feature is particularly useful for accessing the vessel’s local network, connecting to PCs for software updates or diagnostics, or integrating with non-marine Ethernet switches. Unlike direct RayNet cables that connect Raymarine devices to each other, the A80247 acts as a bridge to generic network infrastructures, offering greater integration flexibility.

Integration with Raymarine systems

Within Raymarine’s network cable range, the A80247 stands out for its short-adapter function. While RayNet cables of various lengths (e.g., 1m, 3m, 5m RayNet cables) are used to interconnect Raymarine devices in a watertight and secure manner, this 100mm model is specifically designed for a temporary transition to a standard RJ45 port. It complements existing cabling solutions, enabling simplified management of heterogeneous onboard network configurations.

Expert opinion

Pol CONIN

Digital Manager

« RayNet to RJ45 adapter: Bridge to standard Ethernet »

The RayNet to RJ45 100mm adapter cable, part number A80247, is a critical component for integrators and users seeking to interconnect their proprietary RayNet network with more generic Ethernet equipment. Its ultra-short 100mm length is designed primarily for applications where space is limited, such as behind a multifunction display for a direct connection to a diagnostic PC or a compact Wi-Fi router, without adding cable clutter. It is ideal for quick software updates or remote access via a local network.

This cable differs from longer RayNet cables and waterproof couplers by its specific role as a temporary adapter. It is not intended for primary network links between Raymarine displays or sensors, which require waterproof RayNet-to-RayNet cables for longer distances and robust connections. Its optimal use is for service, configuration, or temporary connection to non-marine equipment. It is important to note that it converts a waterproof RayNet connection into a standard RJ45 connection, which is less resistant to marine environments; therefore, the RJ45 connection must be protected from moisture and water spray.

Durabilité

Facilité d'installation

Rapport performance / prix

Payment and security

Your payment information and data are processed securely.

RayNet to RJ45 Cable - 100mm

£51.28 GBP

£51.28 GBP ~~£57.46 GBP~~

Frequently Asked Questions

Need help? Contact us

What is the RayNet to RJ45 100mm cable from Raymarine (A80247) used for?

This adapter cable is designed to connect a RayNet device (such as a Raymarine Axiom multifunction display or a Quantum radar) to equipment with a standard RJ45 Ethernet port. It enables Raymarine systems to be integrated into local networks or computers for diagnostics or updates.

What is the exact length of this RayNet to RJ45 adapter cable?

The length of this adapter cable is 100 millimetres (10 centimetres). It is specifically designed for short, direct connections, acting as a compact bridge between the two connector types.

What is the difference between a RayNet connector and an RJ45 connector?

The RayNet connector is Raymarine's proprietary Ethernet connector, designed for marine environments. It is robust, watertight, and secure for interconnecting navigation equipment. The RJ45 connector is a standard Ethernet connector commonly used for domestic and professional computer networks, but it is not inherently watertight or marine-rated.

Which Raymarine devices can be connected with this cable?

This cable can be used to connect Raymarine devices equipped with a RayNet port. This typically includes multifunction displays (such as the Axiom series), radars (such as Quantum radars), and other Raymarine network equipment that uses this type of Ethernet connector for connectivity.

Which standard equipment can I connect the RJ45 end of this cable to?

The RJ45 end of this cable can be connected to various standard Ethernet equipment. This includes personal computers (PCs) for diagnostics or software updates, non-marine Ethernet switches, or any other device compatible with a standard RJ45 network connection for integration into the vessel's network.

Why is this adapter cable only 100mm long?

This cable is specifically designed as a short adapter to facilitate a compact, temporary transition between a RayNet port and a standard RJ45 port. Its short length is ideal for installations where both devices are very close, avoiding the clutter of longer cables and simplifying the management of heterogeneous network configurations.

Can I use this cable to connect two Raymarine multifunction displays together?

No, this cable is not intended to directly connect two Raymarine devices equipped with RayNet ports. It is used to connect a RayNet device to equipment with a standard Ethernet RJ45 port. To interconnect two Raymarine devices via RayNet, dedicated RayNet-to-RayNet cables of various lengths are required.