i60 vent afficheur Raymarine - E70061 - Nauti Boutique

Free pickup point from €150 in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

thanks to our network of approved installers

Find an installer

Support service

Opt for additional installation assistance

Save 5%

Raymarine

E70061

i60 wind display

The Raymarine i60 wind display is an instrument dedicated to sailboats combining an analog dial and an LCD screen for optimal reading of apparent, true wind and VMG. Designed to harmonize with the i50 range and replace the old ST60, it integrates natively into SeaTalk and SeaTalk NG (NMEA2000) networks with ultra-low consumption below 1W. The device is supplied with its fascia, protective cover, SeaTalk NG drop cable and fixing kit (wind transducer not included).

Retail priceBenefit from the professional rate

£412.70 GBP

£412.70 GBP ~~£437.57 GBP~~

Shipping calculated at checkout.

In stock

Free pickup point from €150 in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

thanks to our network of approved installers

Find an installer

Support service

Opt for additional installation assistance

Technical specifications

IP rating	IPX6
Operating voltage	12
Product height	115
Product width	110
Wired network	SeaTalk,SeaTalk NG
Backlight color	Red
Housing color	Dark Grey
Housing material	Plastic
Max power consumption	1.5
Product depth	44
Typical power consumption	< 1
NMEA 2000 Load Equivalency Number (LEN)	3
Mounting type	Flush Mount
Operating temperature	-20 to +55
Recommended fuse rating	5
Bus compatibility	SeaTalk,SeaTalk NG,NMEA 2000
Wireless connectivity	None
Certifications	CE,EN60945
Display resolution	N/A
Display type	Segmented LCD display and analog dial
Screen brightness	N/A
Screen size	3.5
Touchscreen	No
Viewing angle	±70
Wired input	SeaTalk,SeaTalk NG,Wind sensor input
Storage temperature	-30 to +70
Relative humidity	93% max
Bonded LCD	No
Package contents	i60 Display, Facia, Sun cover, Seal, SeaTalk NG Jb Cble (400mm), 4 x Fixing screws, Documentation
Alarm types	High wind speed (true/apparent), Low wind speed (apparent)
Depth behind panel	30
Flush-mount protrusion profile	14
Standby consumption	N/A
Product weight	0.29
Sun cover included	Yes

Detailed description

Hybrid Analog and Digital Display

The Raymarine i60 Wind display is a specialized navigation instrument designed to provide sailors with clear and accurate wind data. As part of the i-Series instrument range, it serves as the direct successor to the renowned ST60 series, offering a modernized aesthetic that harmonizes perfectly with the i50 displays (speed and depth) and the brand's multifunction displays. It distinguishes itself from 100% digital displays like the i70s by combining a large analog dial with an LCD screen. The needle provides a visual and instantaneous reading of wind angle, particularly appreciated in sailing for quick reactions to gusts. The lower LCD screen provides precise digital data: apparent and true wind speed and direction, as well as the VMG (Velocity Made Good) function and the layline for the next tack. True wind calculation requires integration of boat speed data on the network. Red backlighting ensures excellent night readability without affecting night vision.

Network Integration and Marine Design

Featuring dual connectivity, the i60 display integrates natively into SeaTalk NG (NMEA2000 compatible) networks and remains backward compatible with the older SeaTalk 1 protocol. It can function as a master display, directly connected to a wind transducer (such as the Rotavecta or long/short arm E22078 models), or as a repeater displaying data from another network sensor. Designed for demanding outdoor environments, it benefits from IPX6 waterproofing and extremely low power consumption (less than 1W), ideal for preserving the battery banks of sailboats.

Documentation

Type	Nom
	EN - i50 & i60 Instruments (E70058, E70059, E70060, & E70062) Flush Mount 2D - i60 Wind Display
	EN - Instructions d'installation et d'utilisation - Afficheur i60 vent
	FR - Notice d'installation et d'utilisation - Afficheur i60 vent
	EN - Mounting template printing instructions
	EN - Declaration of Conformity - i60 Wind Display

Expert opinion

Pol CONIN

Digital Manager

« Analog readability combined with NMEA2000 network precision »

The Raymarine i60 Wind display is an essential benchmark for competitive sailors and demanding yachtsmen. Unlike all-digital multifunction displays, the presence of a true analog needle allows the helmsman to anticipate wind variations much more intuitively. Technically, its dual SeaTalk 1 and SeaTalk NG (NMEA2000) compatibility makes it a key component for both refits of older installations (direct replacement of ST60s with the same cut-out dimensions) and modern architectures. This instrument also shines with its energy efficiency, with a typical consumption of less than 1W, a strategic advantage for energy management on board a sailboat.

Durabilité

Facilité d'installation

Rapport performance / prix

Payment and security

Your payment information and data are processed securely.

i60 wind display

£412.70 GBP

£412.70 GBP ~~£437.57 GBP~~

Frequently Asked Questions

Need help? Contact us

What wind information does the i60 instrument display?

The i60 Wind display indicates several crucial data points for sailing:

Apparent wind speed and direction: Direct measurement of the wind perceived by the moving boat. True wind speed and direction: The actual wind, calculated by integrating the boat's speed. VMG (Velocity Made Good): Your optimal progress speed upwind. Heading for the next tack: A valuable aid for tacking.

Is the i60 display compatible with a NMEA 2000 network?

Yes, the i60 display is compatible with the NMEA 2000 protocol via its SeaTalk NG interface. It can thus be easily integrated into a modern navigation network to share and receive data with other equipment.

Can I connect the i60 display to an old Raymarine SeaTalk 1 system?

Yes, the i60 instrument display features dual connectivity. In addition to the SeaTalk NG network, it is backward compatible with the older SeaTalk 1 protocol, allowing it to be integrated into older installations without the need for a complete replacement.

What is the required supply voltage for the i60 display?

The i60 instrument display operates with a nominal supply of 12V DC. The accepted operating voltage range is 10V DC to 16V DC.

Which wind transducer / vane anemometer sensors are compatible with the i60?

The i60 instrument display can be connected directly to several models of Raymarine wind sensors, including:

The Rotavecta sensor (Z195)The Short Arm Sensor (E22078)The Long Arm Sensor (E22079)

Is the display readable in full darkness?

Yes, the i60 display is equipped with red backlighting. This color is specifically chosen to preserve your night vision while ensuring excellent data readability in the dark.

What is the power consumption of this device?

The i60 display is very energy efficient, which is ideal for sailboats. Its typical power consumption is less than 1 Watt (screen only).

Is it possible to use the i60 as a simple data repeater?

Yes, the i60 instrument can be configured to operate as a repeater. In this mode, it will display wind data from another sensor or instrument already present on your SeaTalk NG or SeaTalk 1 network.

Can the i60's lighting be synchronized with my other Raymarine instruments?

Yes, when connected to a SeaTalk NG network, the i60 instrument can participate in group illumination. This allows you to adjust and synchronize the backlight level of multiple compatible instruments simultaneously.

What are the operating temperatures supported by the device?

The i60 display is designed to operate within a wide temperature range, from -20°C to +55°C (-4°F to +131°F).

Does calibration need to be performed after installation?

Yes, once the installation is complete, it is necessary to go through the user calibration procedures. These include, in particular, adjusting the wind angle offset to ensure accurate wind direction readings.

Can the units of measurement for wind speed be changed?

Yes, you can choose the unit of measurement for wind speed. The default unit is knots (KTS), but other options are available in the device's configuration menus.

How is the i60 display powered?

The display can be powered in two ways:

Via the SeaTalk NG network, using the backbone power cable.By direct connection to the boat's 12V DC supply, using a dedicated power cable (sold separately).

Is the i60 display designed to integrate with other Raymarine instruments?

Yes, the i60 instrument display is part of the i-Series instrument range. Its design and aesthetics are specifically engineered to perfectly complement the i50 instruments (speed, depth) and Raymarine multifunction displays, ensuring a cohesive navigation console.