Free pickup point from €150 in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

thanks to our network of approved installers

Find an installer

Support service

Opt for additional installation assistance

Save 10%

Raymarine

E25051

SeaTalk cable 12m

Designed for Raymarine SeaTalk 1 networks, the 12-meter E25051 cable is an extension solution for existing navigation systems. This range of cables is essential for maintaining older installations, allowing connection of various instruments. Included: a 12-meter SeaTalk 1 cable.

Retail priceBenefit from the professional rate

£63.61 GBP

£63.61 GBP ~~£70.72 GBP~~

Shipping calculated at checkout.

In stock

Free pickup point from €150 in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

thanks to our network of approved installers

Find an installer

Support service

Opt for additional installation assistance

Technical specifications

Section (mm²)	0.5
Section (AWG)	20.0
Number of conductors	3.0
Color	Black
Max voltage	30.0
Shielding	Shielded
Flexibility	Flexible
Current type	DC
Jacket material	PVC
Conductor material	Tinned copper
Certifications	CE
Conductor finish	Tinned
Cable type	Control cable
Cable length	12.0
Compatible network	SeaTalk 1
Pre-molded connectors	Yes
Installation location	On board the boat
Cable application	SeaTalk 1 instrument interconnect
Operating temperature	-15°C to +55°C
Storage temperature	-20°C to +70°C
Min bend radius	26
Connector type	SeaTalk 1 3-pin connector
Shielding type	Braid
UV resistance	Good
Product type	Extension cable

Detailed description

Specifically designed for existing SeaTalk 1 network architectures, the Raymarine E25051 12-metre cable is an essential extension solution for legacy navigation systems. It extends the range of instruments connected via this proprietary protocol, ensuring continuous data communications. Unlike newer networks such as SeaTalkNG or NMEA 2000, which use different connectors and data protocols, this cable is specifically sized for SeaTalk 1 installations.

Compatibility and integration

The E25051 cable integrates directly into an existing SeaTalk 1 network, facilitating interconnection of a variety of first-generation Raymarine instruments. It is compatible with equipment such as multifunction displays from the classic C and E series, ST6000/7000 autopilots, and wind, depth, or speed instruments from the ST40 and ST60 ranges. This cable is particularly useful for network extensions requiring routing over significant distances, or for replacing damaged cables without requiring a complete overhaul of the communication infrastructure.

Positioning and utility

While Raymarine has transitioned to standards like SeaTalkNG (NMEA 2000 compatible), the SeaTalk 1 cable range, including the E25051, remains critical for maintaining and optimizing fleets of boats equipped with older systems. This cable provides a pragmatic solution for owners looking to preserve and extend existing equipment without incurring the costs and complexity of upgrading to newer protocols. It ensures reliable connectivity for essential navigation data, extending the useful life of SeaTalk 1 installations aboard.

Expert opinion

Pol CONIN

Digital Manager

« Raymarine SeaTalk 1 network extension: a reliable solution for existing systems »

This 12-meter SeaTalk 1 cable is a key component for owners of vessels equipped with older Raymarine navigation infrastructure. It is essential for network extension or replacement of defective cables, enabling communication between instruments such as C or E series multifunction displays, ST6000/7000 autopilots, and ST60/ST40 instruments. Its use is strategic to avoid a complete overhaul of the navigation system—often costly and complex—when only a segment of the network requires modification or extension.

Installation is straightforward, akin to a 'plug & play' process for technicians familiar with SeaTalk 1 systems. However, meticulous planning of cable routing is critical to avoid electromagnetic interference and ensure optimal longevity in the marine environment. It is imperative to note that this cable does not allow direct interconnection with SeaTalkNG or NMEA 2000 networks; a dedicated converter, such as Raymarine's SeaTalkNG Converter, would be required for such integration. This product is therefore aimed primarily at users seeking to optimize or repair an existing SeaTalk 1 installation without intending to upgrade to newer communication standards.

Durabilité

Facilité d'installation

Rapport performance / prix

Payment and security

Your payment information and data are processed securely.

SeaTalk cable 12m

£63.61 GBP

£63.61 GBP ~~£70.72 GBP~~

Frequently Asked Questions

Need help? Contact us

Is this Raymarine SeaTalk cable compatible with SeaTalkNG or NMEA 2000 networks?

No, this cable is specifically designed for existing SeaTalk 1 network architectures. It is not compatible with newer networks such as SeaTalkNG or NMEA 2000, which use different connectors and data protocols.

Which Raymarine instruments are compatible with this SeaTalk 1 cable?

This cable integrates directly into an existing SeaTalk 1 network and is compatible with a range of first-generation Raymarine instruments. This includes, for example, the multifunction displays from the classic C and E series, the ST6000/7000 autopilots, and the wind, depth, or speed instruments from the ST40 and ST60 ranges.

What is the main function of this 12-meter SeaTalk 1 cable?

The main function of this cable is to extend the range of instruments connected on an existing SeaTalk 1 protocol. It is essential for expanding a network over a significant distance, or for replacing damaged cables to ensure continuous data communication between first-generation Raymarine equipment.

What is the exact length of this Raymarine SeaTalk cable?

This Raymarine SeaTalk cable is 12 meters long.

Why use a SeaTalk 1 cable when Raymarine offers more recent systems?

This cable is critical for maintaining and optimizing older boats equipped with Raymarine systems. It provides a practical solution for owners looking to retain and expand their existing equipment without incurring the costs and complexity of a full upgrade to newer protocols like SeaTalkNG. It ensures reliable connectivity for essential navigation data, extending the useful life of SeaTalk 1 installations aboard.

How is this cable connected to an existing SeaTalk network?

This cable is designed to integrate directly into an existing SeaTalk 1 network. It typically connects via the specific connectors for the SeaTalk 1 protocol, allowing the network to be extended by linking instruments or additional cable segments. Installation is plug-and-play for SeaTalk 1 systems.

What types of connectors are used on this SeaTalk 1 cable?

SeaTalk 1 cables use proprietary Raymarine three-pin connectors (yellow, red, black) for power and data. This cable is fitted with these specific connectors to ensure direct compatibility with SeaTalk 1 devices and networks.

Can I use multiple of these cables to extend my SeaTalk 1 network further?

Yes, it is possible to use multiple SeaTalk 1 cables, including this 12-metre model, to extend the range of your SeaTalk 1 network. However, it is important to respect the maximum recommended lengths for the SeaTalk 1 network to avoid signal degradation. For very long extensions, the use of SeaTalk junction boxes may be considered.