Cable Y Raymarine A102146 pour modules de sonde CHIRP CP470 et CP570

Free pickup point from €150 in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

thanks to our network of approved installers

Find an installer

Support service

Opt for additional installation assistance

Save 10%

Raymarine

A102146

Y Cable CP470/CP570

Designed for Raymarine CHIRP fishfinder modules CP470 and CP570, the Y-cable A102146 allows connecting two transducers to a single module, extending underwater detection capabilities. This is an essential spare part for optimizing professional installations. Included: 1x Raymarine Y-cable A102146.

Retail priceBenefit from the professional rate

£47.40 GBP

£47.40 GBP ~~£53.04 GBP~~

Shipping calculated at checkout.

In stock

Free pickup point from €150 in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

thanks to our network of approved installers

Find an installer

Support service

Opt for additional installation assistance

Technical specifications

Connector type	Raymarine proprietary depth sounder connector
Cable type	Fishfinder cable
Cable length	0.5
Compatible network	Proprietary fishfinder connection
IP rating	IPX6
Certifications	CE
Product type	Cable
Compatible models	Raymarine CP470, Raymarine CP570

Detailed description

The Raymarine Y cable A102146 is an essential accessory designed to extend the capabilities of the CHIRP fishfinder modules CP470 and CP570. This cable allows you to connect two transducers to a single fishfinder module, optimizing coverage and flexibility in your underwater detection system. It is essential for setups requiring simultaneous use of multiple transducers, for example to combine different frequencies or beam angles.

Integration and performance

Specifically designed for Raymarine CP470 and CP570 modules, this Y cable ensures perfect electrical and mechanical compatibility. The CP470 and CP570 modules are known for their cutting-edge CHIRP performance, offering target discrimination and seabed resolution. Adding the Y cable enables you to fully leverage these technologies by allowing advanced transducer configurations, where more basic systems like Dragonfly or Element would only allow a single direct connection.

Installation flexibility

This Y cable provides a solution for complex installations where access to the modules is limited or when you want to maximize sonar data from multiple points. It is a specific spare part for Raymarine’s professional fishfinder module range, distinguished from generic accessories by its design and integration within the Raymarine ecosystem. It is intended for users seeking greater modularity in their CHIRP fishfinder system.

Expert opinion

Pol CONIN

Digital Manager

« Dual-transducer integration for CP470 and CP570 »

The Raymarine A102146 cable is a critical technical component for demanding CHIRP fishfinder installations on CP470 and CP570 models. Its value lies in enabling the integration of two transducers on a single fishfinder module. This setup is particularly relevant for vessels requiring diversified sonar coverage, such as simultaneous use of a high-frequency transducer for structure detection and a low-frequency transducer for deep-water depth and fish finding.

In installation scenarios, this cable is essential when only one CP470 or CP570 module is available but the operator wants the benefits of two separate transducers, for example a through-hull and a transom-mount, or two transducers optimized for different depths. It simplifies wiring by avoiding the addition of a second complete fishfinder module, which is an advantage in terms of space and cost compared to a dual-module solution. Always verify the compatibility of the transducers with the frequencies supported by the CP470 or CP570 modules to ensure optimal performance.

Durabilité

Facilité d'installation

Rapport performance / prix

Payment and security

Your payment information and data are processed securely.

Y Cable CP470/CP570

£47.40 GBP

£47.40 GBP ~~£53.04 GBP~~

Frequently Asked Questions

Need help? Contact us

What is the Raymarine A102146 Y-cable used for?

This Y-cable is an essential accessory designed to extend the capabilities of the Raymarine CP470 and CP570 CHIRP fishfinder modules. It allows you to connect two transducers to a single fishfinder module, optimizing coverage and flexibility in your underwater detection system.

Which Raymarine fishfinder modules is this Y-cable compatible with?

The Y-cable A102146 is specifically designed to be compatible with Raymarine CP470 and CP570 CHIRP professional fishfinder modules.

Can I connect two transducers with different frequencies using this Y-cable?

Yes, one of the main advantages of this Y-cable is that it allows advanced setups, including the simultaneous use of multiple transducers with different frequencies or beam angles for improved coverage.

Is this cable compatible with Raymarine Dragonfly or Element fishfinders?

No, this Y-cable is not compatible with basic fishfinder systems such as Raymarine Dragonfly or Element. It is specifically designed for CHIRP professional fishfinder modules CP470 and CP570.

What is the benefit of using a Y-cable for my CHIRP fishfinder system?

Using a Y-cable optimizes coverage and flexibility by connecting two transducers to a single module. This enables advanced configurations, such as combining different frequencies or beam angles, to maximize sonar data and improve target discrimination as well as seabed resolution.

How is the Raymarine A102146 Y-cable installed on my sounder module?

The Y-cable connects to the input of the Raymarine CP470 or CP570 sounder module. The two 'Y' ends of the cable are then connected to the two transducers you wish to use. It ensures perfect electrical and mechanical compatibility with these modules.

Can this Y-cable be used with transducers from different brands?

This Y-cable is a specific spare part for Raymarine’s professional fishfinder module range and is designed for optimal integration within the Raymarine ecosystem. To ensure maximum performance and compatibility, it is recommended to use it with compatible Raymarine transducers.