Rokk Wireless Active wireless charger - 15W - On stand

Free pickup point from €150 in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

thanks to our network of approved installers

Find an installer

Support service

Opt for additional installation assistance

Scanstrut

SC-CW-04G

Rokk Wireless Active wireless charger - 15W - On stand

Name: Rokk Wireless Active wireless charger - 15W - On stand
Brand: Scanstrut
SKU: SC-CW-04G
Price: 124.50 GBP
Availability: InStock

null

Retail priceBenefit from the professional rate

£124.50 GBP

Shipping calculated at checkout.

In stock

Free pickup point from €150 in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

thanks to our network of approved installers

Find an installer

Support service

Opt for additional installation assistance

Technical specifications

Power source type	DC (Direct Current)
Nominal voltage	12V / 24V
Puissance de sortie maximale	15W
Connecteur de sortie	Wireless (Inductive Qi)
Cable type	DC power cable
Fusible intégré	No (external required)
Catégorie de vitesse de charge	Fast charging
IP rating	IPX6
Mounting type	On baseplate
Puissance de sortie maximale	15.0
Compatible Qi	Yes
Plage de tension d'entrée	10-30V DC

Detailed description

Chargeur sans fil Rokk Wireless Active - 15W - Sur socle de Scanstrut pour installation electrique marine.

Ce composant s integre dans un systeme d energie embarque pour la charge, la conversion, la protection ou le suivi selon le modele choisi. Controlez la tension, le courant et la compatibilite avec votre parc batterie avant installation.

Documentation

Type	Nom
	__doc.pdf
	__install.pdf
	doc.pdf
	install.pdf

Payment and security

Your payment information and data are processed securely.

Rokk Wireless Active wireless charger - 15W - On stand

£124.50 GBP

Frequently Asked Questions

Need help? Contact us

What is the maximum charging power of this Scanstrut Rokk Wireless Active wireless charger?

The Scanstrut Rokk Wireless Active wireless charger delivers a maximum output power of 15W. It can also provide 5W, 7.5W, and 10W outputs. Actual output power depends on your phone model and its ability to accept fast charging.

Is this Scanstrut charger waterproof and suitable for a marine environment?

Yes, the Scanstrut Rokk Wireless Active charger is perfectly suited to a marine environment. It has an IPX6 waterproof rating, meaning it is protected against powerful water jets from any direction, both at the front and rear of the device.

Which mobile phone models are compatible with the Rokk Wireless Active charger?

The Rokk Wireless Active charger is designed specifically for charging mobile devices compatible with the Qi standard. The output power may vary (5W, 7.5W, 10W, 15W) depending on your phone model.

Can I charge my phone with a protective case on this wireless charger?

Yes, this wireless charger can charge your phone through non-metallic protective cases up to approximately 3mm thick. Phone cases may slightly affect overall charging performance.

What is the required input voltage range to power this charger?

The Scanstrut Rokk Wireless Active charger requires an input voltage of 10 to 30V DC. It is therefore compatible with 12V and 24V marine electrical systems.

What are the main steps to install the Scanstrut Rokk Wireless Active charger on my boat?

Installing the Rokk Wireless Active charger on its base involves the following steps:

Unpack the charger and insert the supplied installation template. Ensure there is enough space to open the charger jaws and that the installation area is flat and vertical.Use the supplied drilling template to mark and drill the cable pass-through hole (Ø 6mm) and the four pilot holes.Thread the cable through the hole.Apply sealant to the four mounting screws.Secure the product in place.Remove the installation template.It is recommended to disconnect power before installation and to use an appropriate fuse or circuit breaker between the power source and the product.

What are the required drilling dimensions to mount the wireless charger on its base?

For installing the Rokk Wireless Active wireless charger on its base, you will need to drill:

One cable pass-through hole with a diameter of 6.0 mm (0.24”).Four pilot holes for mounting screws.The drilling template also indicates a minimum diameter of 42 mm (1.6”) for the charger body clearance and a maximum depth of 205 mm (8.1”) for rear clearance. A template is provided to simplify marking the drilling points.