USB-C Double Flip Pro Max Socket

The required drilling diameter is 32 mm (1 1/4 inch). Use a 32 mm hole saw to drill the hole in the panel. Installation is exclusively from the front of the panel.

Panel thickness must be between 3 mm (0.11 in) minimum and 25 mm (1 in) maximum. This range allows secure installation on most boat dashboards.

Yes, in addition to the 32 mm hole, you must drill two pilot holes for mounting the front ring. The drill bit size depends on the material: 2.5 mm (3/32 in) for soft materials like plywood, and 3 mm (1/8 in) for hard materials like fiberglass.

The required tools are: a 32 mm (1 1/4 inch) hole saw, a drill, a 2.5 mm or 3 mm drill bit depending on the material, a Pozidriv screwdriver, and silicone sealant to ensure watertightness of the fittings.

To ensure IPX4 waterproofing on the front panel, apply silicone around the fasteners and pilot holes before installing the front ring. Make sure the mounting surface is perfectly flat, smooth, and non-porous. The supplied gasket must be correctly positioned between the housing and the panel.

The port accepts an input voltage of 10 to 32 V DC, making it compatible with 12 V and 24 V electrical systems found on boats. It can therefore be used on most marine installations.

On a 12 V system, the USB-C output delivers up to 36 W with the following profiles: 5 V⎓3 A, 9 V⎓3 A, and 12 V⎓3 A maximum. This allows for fast charging of compatible smartphones and tablets.

On a 24 V system, the USB-C output delivers up to 60 W with the following profiles: 5 V⎓3 A, 9 V⎓3 A, 12 V⎓3 A, 15 V⎓3 A, and a maximum of 20 V⎓3 A. This allows fast charging of more demanding devices such as laptops.

Yes, the socket is specifically designed to charge devices compatible with Quick Charge (QC) and Power Delivery (PD). It automatically negotiates the best charging profile with the connected device, within its capabilities.

Standby power consumption is less than 0.1 W, with a typical value of just 0.01 W. This ensures minimal discharge of the boat's battery when the socket is not in use.

The IP rating is IPX4 on the front face, meaning it is protected against water splashes from any direction. This protection is only valid if the installation is carried out correctly according to the instructions.

No, this product is not approved for use in hazardous or flammable atmospheres, such as an engine room. Do not install it in such areas. Choose a well-ventilated location away from heat sources.

Wire gauge and fuse rating depend on the input voltage and the maximum current of 6 A. For a professional installation, it is recommended to consult an electrician. Use an appropriate fuse or circuit breaker between the battery and the product.

This is normal: the product has a safety feature that may temporarily shut it down if ambient temperature is high or if it is exposed to direct sunlight. Avoid installing it in areas exposed to thermal radiation or with poor ventilation.

Yes, if your laptop is USB-C Power Delivery compatible and you are on a 24 V system, the outlet can deliver up to 60 W (20 V⎓3 A), which is sufficient for many laptops. On a 12 V system, the maximum power is 36 W.

Yes, the installation instructions include a 1:1 scale drilling template. This template allows you to mark the 32 mm hole and pilot holes precisely before drilling.