Colliers fixes JL Audio ETXv3, tube 2 po - 010-13704-00 - vue 1

Free pickup point from €150 in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

thanks to our network of approved installers

Find an installer

Support service

Opt for additional installation assistance

Save 5%

JL Audio

010-13704-00

Fixed collars JL Audio ETXv3, 2" tube

Fixed JL Audio mounts for ETXv3 enclosed speakers, 2-inch (50.8 mm) round tube. Speakers sold separately.

Retail priceBenefit from the professional rate

QAR 757,01

QAR 757,01 ~~QAR 798,11~~

Shipping calculated at checkout.

Import duties and taxes are payable by you on delivery.

Prices shown excluding VAT for Qatar. If your delivery address is in the European Union, the VAT of the destination country will be added at checkout.

Available in stock

Free pickup point from €150 in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

thanks to our network of approved installers

Find an installer

Support service

Opt for additional installation assistance

Technical specifications

Mounting type	Mounts on round tube
Compatible models	JL Audio ETXv3
Installation type	Round-tube mount
Kit contents	Two lower mounts, two upper mounts, two tubes of red Loctite, eight 1/4" split lock washers, eight 1/4-20 x 1-1/4" screws, four 5/16" split lock washers and four 5/16-18 x 1-1/4" screws. The silicone and fasteners marked with an asterisk in the manual are supplied with the ETXv3 speakers, not with the clamps alone.
Product type	Mounting clamp for speaker
Cable Routing Options	Through the tube or via a side opening
Model	M-MCPv3-2.000
Mounting Bar Diameter In	2
Thread Locking Compound Included	Yes

Detailed description

The M-MCPv3-2.000 mounts are for 2" (50.8 mm) round tubes and ETXv3 enclosure systems. Their orientation is adjustable during installation before final tightening; they are not pivoting mounts in use.

Installation and contents

Two lower mounts, two upper mounts, two tubes of red Loctite, eight 1/4" split washers, eight 1/4-20 x 1-1/4" screws, four 5/16" split washers, and four 5/16-18 x 1-1/4" screws. The silicone and hardware marked with an asterisk in the manual are supplied with the ETXv3 enclosures, not with the mounts alone.

Choose between side cable entry or tube cable entry, then follow the manufacturer’s screw and thread-locking procedure.

Documentation

Type	Nom
	EN - Instructions d'installation pour fixations de haut-parleurs ETXv3 - Colliers fixes JL Audio ETXv3, barre 2 po

Expert opinion

« Skysat advice: compatibility and installation »

Measure the tube diameter and identify an ETXv3 enclosure before ordering. Prepare the cable routing before tightening the mounts. Support the enclosure during installation and adjust its orientation before the final tightening. An ETXv3 mount is not an interchangeable VeX mount.

Payment and security

Your payment information and data are processed securely.

Fixed collars JL Audio ETXv3, 2" tube

QAR 757,01

QAR 757,01 ~~QAR 798,11~~

Frequently Asked Questions

Need help? Contact us

What are the JL Audio ETXv3 fixed clamps used for?

These fixed mounts are used to install JL Audio ETXv3 speakers in an enclosure onto a round tube. The speakers are sold separately.

What is the tiller diameter compatible with these fixed clamps?

This part number corresponds to a 2-inch (50.8 mm) round tube. Measure the tube before ordering.

Which JL Audio speaker systems are compatible with these brackets?

The manual covers all ETXv3 enclosed speaker systems and M-MCPv3 fixed mounts on round tubes. This scope does not extend to VeX speakers.

Which items are included with the fixed M-MCPv3 clamps?

Two lower brackets, two upper brackets, two tubes of red Loctite, eight 1/4" split lock washers, eight 1/4-20 x 1-1/4" screws, four 5/16" split lock washers and four 5/16-18 x 1-1/4" screws. The silicone and fasteners marked with an asterisk in the manual are supplied with the ETXv3 speakers, not with the brackets alone.

How to route the speaker cable during installation?

The cable can exit through the side opening of the lower mount or pass through the tube. For internal routing, the manual describes a 5/16 or 3/8 in hole whose edges must be smoothed.

How to securely attach clamps to the tiller?

Follow the sequence in the manual: provisional positioning, orientation selection, then apply red Loctite threadlocker and final tightening of the 1/4-20 and 5/16-18 screws involved. Support the enclosure during assembly.

How to secure the enclosure with clamps?

Follow the sequence in the manual: temporary positioning, orientation selection, then apply Loctite red threadlocker and final tightening of the relevant 1/4-20 and 5/16-18 screws. Support the enclosure during assembly.

What hole size should I drill for cable routing through the pipe?

A hole in the tube is only required if you choose internal cable routing. The manual specifies a 5/16 or 3/8 in hole; smooth its edges to protect the wires.

Is it possible to adjust the speaker angle after installing the clamps?

These are fixed mounts, not pivoting brackets in use. The manual specifies adjusting the array’s yaw before final tightening. Rotating the speaker within its housing is a separate operation.

Are these swivel or fixed mounts?

These are fixed mounts, not pivoting brackets in use. The manual specifies adjusting the array’s yaw before final tightening. Rotating the speaker within its housing is a separate operation.

What is the model number of these fixed collars?

The model for this reference is M-MCPv3-2.000.

Which brand are these collars from?

This is a JL Audio mount.

When should I use Loctite® Red Thread-Locking Compound?

Follow the sequence in the manual: provisional positioning, orientation selection, then apply red Loctite threadlocker and final tightening of the 1/4-20 and 5/16-18 bolts concerned. Support the enclosure during assembly.