Enceintes Fusion Signature 3i 6,5 po, Classic blanches (paire) - 010-02771-00 - vue 1

Enceintes Fusion Signature 3i 6,5 po, Classic blanches (paire) - 010-02771-00 - vue 2

Enceintes Fusion Signature 3i 6,5 po, Classic blanches (paire) - 010-02771-00 - vue 3

Enceintes Fusion Signature 3i 6,5 po, Classic blanches (paire) - 010-02771-00 - vue 4

Free pickup point from €150 in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

thanks to our network of approved installers

Find an installer

Support service

Opt for additional installation assistance

Save 8%

Fusion

010-02771-00

Fusion Signature 3i 6.5" Classic white speakers (pair)

Pair of Classic white speakers without LED: 75 W RMS, 230 W peak and 4 ohms per speaker. IP65 protection on front; rear to be protected.

Retail priceBenefit from the professional rate

QAR 1.112,26

QAR 1.112,26 ~~QAR 1.205,30~~

Shipping calculated at checkout.

Import duties and taxes are payable by you on delivery.

Prices shown excluding VAT for Qatar. If your delivery address is in the European Union, the VAT of the destination country will be added at checkout.

Available in stock

Free pickup point from €150 in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

thanks to our network of approved installers

Find an installer

Support service

Opt for additional installation assistance

Technical specifications

Speaker Diameter In	6.5
Mounting Diameter	136
Color	White
Mounting orientation	Vertical in exposed area with water or weather exposure
Mounting type	Flush-mounted
Number Of Speakers Included	2
Rear Water Protection	Rear non-waterproof, protect from moisture
Recommended Speaker Wire Gauge Awg	16 or thicker
Recommended Speaker Wire Material	Fully tinned copper marine-grade

Detailed description

This model is a pair of Fusion Signature 3i 6.5" Classic white speakers without LED lighting. Each speaker accepts 75 W RMS and 230 W maximum, with a nominal impedance of 4 ohms, a sensitivity of 90 dB at 1 W/1 m, and a frequency response from 70 Hz to 22 kHz.

The CURV cone features a rubber surround and the tweeter has a silk dome. The manual recommends amplification between 25 and 150 W RMS per channel.

Mounting preparation

Cutout diameter: 136 mm. Minimum rear clearance: 79 mm. Compass distance: 310 mm. IP65 rating applies to the front face when correctly installed; the rear and its connections must be protected from moisture. In areas exposed to water or weather, vertical mounting is mandatory. LED sections in the manual do not apply to this variant.

Documentation

Type	Nom
	EN - Gabarit de montage encastré - Enceintes Fusion Signature 3i 6,5 po, Classique blanches (paire)
	EN - Instructions d'installation des haut-parleurs Signature Series - Enceintes Fusion Signature 3i 6,5 po, Classique blanches (paire)

Expert opinion

« Skysat advice: compatibility and installation »

Protect the rear of each speaker from moisture: IP65 does not eliminate this precaution. In areas exposed to water or harsh weather, mount speakers on a vertical surface well above the waterline. Allow 79 mm rear clearance and a 136 mm cutout, then maintain a 310 cm distance from the compass. Use marine-grade tinned copper wire of 16 AWG or thicker, watertight connectors, and mechanical strain relief for the connectors.

Payment and security

Your payment information and data are processed securely.

Fusion Signature 3i 6.5" Classic white speakers (pair)

QAR 1.112,26

QAR 1.112,26 ~~QAR 1.205,30~~

Frequently Asked Questions

Need help? Contact us

What size are the Fusion Signature 3i speakers?

The nominal diameter is 6.5 inches. This is not the cutout diameter: that is 136 mm.

What is the color of these Fusion Signature 3i speakers?

This reference is the Classic white version.

Are Fusion Signature 3i speakers sold individually or in pairs?

This reference is sold by pair.

Are the Fusion Signature 3i speakers water-resistant?

IP65 protection applies to the front face when the enclosure is correctly installed. The rear, wires, and connected components are not waterproof and must be protected from moisture.

How to clean Fusion Signature 3i speakers?

Clean salt with a damp cloth and fresh water; use a mild detergent if needed. Avoid solvents and high-pressure jets.

What is the True-Marine™ certification for Fusion products?

True-Marine refers to Fusion’s marine environmental design and testing. It is not an independent certification nor a guarantee of rear watertightness.

Which tools are required to install the Fusion Signature 3i speakers?

Prepare a drill, a bit suitable for the mounting surface, a saw for cutting, a Phillips screwdriver, and wire strippers. Use tinned marine-grade copper cable of 16 AWG or thicker; connections must be watertight.

What is the required cutout size for installing the speakers?

The nominal diameter is 6.5 inches. This is not the cutout diameter: that is 136 mm.

Where should Fusion Signature 3i speakers not be installed?

Protect the rear from moisture. In areas exposed to water or bad weather, use a vertical surface and a location above the waterline. Also respect the compass distance of 310 cm.

Which speaker wire type is recommended for these speakers?

The manual specifies tinned marine-grade copper cable of 16 AWG (1.3 to 1.5 mm²) or thicker, with watertight splices. Cable to the source or amplifier is not supplied.

How can I control the LED colors of the speakers?

This reference is the Classic white version.

Which fuse is required for the LED lighting of the Fusion Signature 3i speakers?

This Classic white reference does not feature LED lighting. The LED sections in the common manual pertain to other variants.

Should the boat's power supply be disconnected before installation?

Turn off the boat's electrical power before installation and mute the audio system before making connections.

What are the guidelines for routing speaker cables?

Protect wires at edges and use grommets when passing through panels. Avoid electrical interference sources.

How to ensure watertight connections for cables?

Make watertight splices and secure Amphenol AT connectors to relieve strain on wires. A watertight connector does not make the rear of the enclosure watertight.

What is the warranty duration for these Fusion Signature 3i speakers?

The manual states a limited worldwide consumer warranty of three years for True-Marine products, subject to applicable conditions.

Which actions can void the warranty on speakers?

The manual specifically warns against exposing the rear to water, high-pressure jets, and unprotected connections. Follow the installation instructions and applicable warranty conditions.