Tweeters Fusion Signature 3i blancs (paire) - 010-02796-20 - vue 1

Tweeters Fusion Signature 3i blancs (paire) - 010-02796-20 - vue 2

Tweeters Fusion Signature 3i blancs (paire) - 010-02796-20 - vue 3

Tweeters Fusion Signature 3i blancs (paire) - 010-02796-20 - vue 4

Free pickup point from €150 in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

thanks to our network of approved installers

Find an installer

Support service

Opt for additional installation assistance

Save 5%

Fusion

010-02796-20

Fusion Signature 3i white tweeters (pair)

Signature 3i 60 W RMS aluminium dome tweeters: 60 W RMS and 330 W peak. Pair with Signature speakers using a DSP stereo amplifier stable under 2 ohms.

Retail priceBenefit from the professional rate

QAR 425,71

QAR 425,71 ~~QAR 448,96~~

Shipping calculated at checkout.

Import duties and taxes are payable by you on delivery.

Prices shown excluding VAT for Qatar. If your delivery address is in the European Union, the VAT of the destination country will be added at checkout.

Available in stock

Free pickup point from €150 in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

thanks to our network of approved installers

Find an installer

Support service

Opt for additional installation assistance

Technical specifications

Audio Output Power Rms	60
Peak Power W	330
Impedance	4
Audio Frequency Response	3000-20000
Audio Sensitivity Db	91
Speaker Tweeter Type	Aluminum dome
Mounting Diameter	51
Mounting Depth	31
IP rating	IP65
Color	White
Compatible Speaker Series	Fusion Signature Series
Compatible Stereo Impedance Ohms	2
Crossover Type	Integrated passive
Grille Attachment Method	Snap-fit
Included Mounting Hardware	Fastening screw
Installation Hole Saw Size	51
Model name	SG-TW10
Recommended Speaker Wire Gauge Awg	16 or thicker
Recommended Speaker Wire Gauge Mm2	1.3–1.5 or more

Detailed description

These white tweeters complement the high frequencies of a Fusion Signature system. The SG-TW10 manual specifies an aluminum dome, 60 W RMS, 330 W peak, 91 dB at 1 W/1 m, and a frequency response from 3 to 20 kHz.

Compatibility check required

The datasheet restricts use to Fusion Signature speakers and stable DSP stereos under 2 ohms per channel. The tweeter’s nominal impedance is 4 ohms; it drops to 2 ohms in the described configuration. Confirm exact models before installation and apply the speaker and tweeter DSP profile via Fusion-Link. The passive crossover is integrated.

Installation

Cutout diameter: 51 mm. Minimum clearance: 31 mm. Compass distance: at least 110 cm. The datasheet specifies a 2 m cable per tweeter for connection to the Signature speaker. Use tinned marine-grade copper extension cable of 16 AWG or thicker if needed. The IP65 rating requires compliant installation; avoid high-pressure jets.

Documentation

Type	Nom
	EN - Instructions d'installation du tweeter SG-TW10 Signature Series - Tweeters marins Fusion Signature 3i, blancs

Expert opinion

« Skysat advice: compatibility and installation »

Check the impedance under 2 ohms and the DSP profile of the stereo before purchasing these tweeters; a simple speaker output is not sufficient. Test and listen to the system before cutting the mounting holes. Install the tweeters near the associated Signature speakers, high enough for the high frequencies to be audible, then secure the connections and mechanically retain the connectors.

Payment and security

Your payment information and data are processed securely.

Fusion Signature 3i white tweeters (pair)

QAR 425,71

QAR 425,71 ~~QAR 448,96~~

Frequently Asked Questions

Need help? Contact us

What is the exact model of these Fusion Signature 3i marine tweeters?

The applicable manual is the one for the SG-TW10 Signature Series Component Tweeter. This reference corresponds to the white tweeters.

What is the maximum power and RMS power of these tweeters?

The datasheet specifies 60 W RMS and 330 W maximum for the tweeter. These are not power consumption ratings.

What is the frequency response of the Fusion Signature 3i tweeters?

The specified response is 3 kHz to 20 kHz.

What is the diaphragm material of these tweeters?

The dome is a hard aluminum dome.

What is the efficiency (sensitivity) of these tweeters?

The stated sensitivity is 91 dB at 1 W/1 m.

What is the operating and storage temperature range of these tweeters?

The operating temperature range is 0 to 50 °C; storage temperature range is -20 to 70 °C.

What is the waterproof rating of these tweeters?

The manual specifies IP65 when installed correctly. Avoid high-pressure jets and aggressive or solvent-based cleaners.

What is the color of these Fusion Signature 3i marine tweeters?

This reference is white.

Which types of speakers are these tweeters compatible with?

The manual restricts this pairing to Fusion Signature Series speakers. Also confirm compatibility of the DSP stereo under 2 ohms per channel.

Which stereo systems are these tweeters compatible with?

Use a DSP stereo amplifier rated stable under 2 Ω per channel and apply in Fusion-Link the DSP profile matching the Signature speakers and tweeters.

What is the nominal impedance of these tweeters?

The standalone tweeter has a nominal impedance of 4 ohms. In the setup described with a Signature enclosure, the combined system presents 2 ohms.

What is the recommended RMS amplifier power for these tweeters?

The manual recommends 25 to 140 W RMS per channel. Also check stability under 2 ohms and DSP compatibility of the system.

What is the required hole diameter for installing these tweeters?

The mounting cutout is 51 mm; it does not define the dome diameter.

What is the minimum mounting depth required for these tweeters?

The minimum mounting clearance is 31 mm.

Is an external crossover module required for these tweeters?

The passive filter is built-in: no additional filtering module is required in the setup described by the manufacturer.

How should these tweeters be connected to the audio system?

Use the 2 m cable supplied by the tweeter for the connection described with the Signature speaker. If an extension is required, the manual specifies tinned marine-grade copper wire of 16 AWG or thicker and watertight splices.

Does the stereo system need to be configured after installing the tweeters?

Use a DSP stereo amplifier stable under 2 ohms per channel and apply in Fusion-Link the DSP profile corresponding to the Signature speakers and tweeters.