PRZESTARZAŁY - BEP Contour Matrix 600-GDL

The detector integrates automatic solenoid control with pulse-and-hold circuit technology for low power consumption. It also features dual-sensor capability, provision for an external alarm, and provision for automatic bilge fan switching.

The BEP Contour Matrix 600-GDL gas detector requires a 10V to 15V DC power supply.

The maximum total current consumption of the 600-GDL detector is 350 mA.

If gas is detected, the sensor lights up red and a rapid audible alarm sounds.

The green LED indicates that the sensor is in a safe state, no smoke is detected, and no alarm is sounding.

The orange LED indicates that a sensor failure has been detected and a slow beeping sound is emitted.

The bypass mode disables the sensor. A flashing green LED indicates the sensor is disabled and in a safe state. A flashing orange LED indicates the sensor is disabled and a fault has been detected.

If the sensor is wet, it becomes inoperative and must be replaced.

The sensor cable supplied is 5 metres long.

Yes, the 600-GDL model is equipped with an integrated automatic solenoid stop control.

Yes, the 600-GDL detector has a manual override function that disables the gas detector.

Yes, the detector has a provision for connecting an external alarm.

Yes, the bilge alarm is equipped with a provision for automatic switching of the bilge pump.

The BEP Contour Matrix 600-GDL detector has a dual-sensor capacity, meaning it can support two sensors.

During the preheating phase, all LEDs flash orange at a slow average speed.

The maximum current per output of the detector is 800 mA.

Yes, the 600-GDL detector integrates pulse-and-hold circuit technology for solenoid control, enabling low power consumption.

Yes, the BEP Contour Matrix 600-GDL gas detector is a marine safety solution.

The detector uses several visual indicators:

Green: Sensor safe, no gas detected.Red: Gas alarm triggered.Orange: Sensor failure detected.Flashing green: Bypass mode active, sensor disabled and safe.Flashing orange: Bypass mode active, sensor disabled and failure detected.