Deckhand Dimmer - 24V DC 12A - Deckhand Dimmer - 24V DC 12A

Deckhand Dimmer - 24V DC 12A - Dimensioned Drawing

Point relais offert dès 150€ en France
Retrait chez Skysat possible

Installation sur mesure

Faites confiance à Skysat pour installer l'équipement à bord

Demander un devis

Installateurs autour de vous

grâce à notre réseau d'installateurs agréés

Trouvez un installateur

Service d'assistance

Optez pour une aide complémentaire à la pose

Oszczędź 13%

Blue Sea Systems

7509-BSS

Regulator Deckhand – 24 V DC 12 A

Q: What is the primary function of the Deckhand 7509 variator?

The BLUE SEA Deckhand 7509 dimmer is designed to digitally control the light intensity of unregulated LEDs, incandescent and halogen bulbs in 24 V DC marine systems. It provides precise lighting management on board.

Q: Which types of lights can be controlled by this dimmer?

This dimmer can control the brightness of:Unregulated LED bulbsIncandescent bulbsHalogen bulbs

Q: What is the nominal voltage required for the Deckhand 7509 autopilot drive?

The Deckhand 7509 drive requires a nominal voltage of 24 V DC (direct current) to operate correctly.

Q: What is the supported operating voltage range for this inverter?

The Deckhand 7509 drive can operate within a voltage range from 18 V to 32 V DC.

Q: What is the maximum output current that the inverter can handle?

The maximum output current that the Deckhand 7509 drive can handle is 12 A.

Q: How does the "bulb saver" function protect the bulbs?

The "bulb saver" function integrated into the Deckhand 7509 dimmer prevents premature aging of bulbs when the boat's batteries are being charged. This helps extend the lifespan of your bulbs.

Q: How does the overcurrent protection in the autopilot work?

The Deckhand 7509 drive has built-in overcurrent protection. If the unit stops working due to an overcurrent, simply correct the excessive load, then hold the drive's switch down until the circuit flashes to reset it.

Q: What temperature range can the Deckhand 7509 drive operate in?

The Deckhand 7509 drive is designed to operate across a wide temperature range, from −40°C to 85°C.

Q: What type of control technology is used for intensity variation?

The Deckhand 7509 dimmer uses Pulse Width Modulation (PWM) to control light intensity.

Q: Does the dimmer store the last lighting intensity setting?

Yes, the Deckhand 7509 dimmer has a memory that stores the last used light intensity setting.

Le variateur BLUE SEA Deckhand 7509 est un contrôleur numérique d'éclairage 24 V CC de 12 A, optimisé pour les LED non régulées, halogènes et incandescentes. Il se positionne comme une solution polyvalente dans la gamme Deckhand, avec une sortie temporisée et une protection intégrée contre les surintensités. Un interrupteur momentané (ON)-OFF-(ON) est inclus.

Napięcie: 24 V

12 V 24 V

Prąd: 12 A

6 A 12 A

Prix publicBénéficier du tarif pro

543,38 PLN

543,38 PLN ~~627,77 PLN~~

Cena brutto Dostawa obliczana w momencie płatności.

Dostępny

Point relais offert dès 150€ en France
Retrait chez Skysat possible

Installation sur mesure

Faites confiance à Skysat pour installer l'équipement à bord

Demander un devis

Installateurs autour de vous

grâce à notre réseau d'installateurs agréés

Trouvez un installateur

Service d'assistance

Optez pour une aide complémentaire à la pose

Caractéristiques techniques

Typ interfejsu sterowania	Interrupteur momentané (ON)-OFF-(ON)
Typ sterowania	Modulation de largeur d'impulsion (PWM)
Systemy oświetlenia kompatybilne	LED non régulées, incandescentes, halogènes
Zone Control	Non
Zakres napięcia pracy	18 à 32
Typowe zużycie energii	< 0.05
Typ montażu	Montage en surface
Wymiary produktu	82.55 x 88.9 x 50.8
Kompatybilny z ściemniaczem	Oui
Zawartość opakowania	Variateur Deckhand, interrupteur momentané (ON)-OFF-(ON)
Certyfikacje	E-marked, ISO 8846, SAE J1171, SAE J1455, SAE J1113
Dimmer Memory Function	Oui
Ignition Protection Standard	ISO 8846, SAE J1171
Illuminated Exit Delay Max Minutes	5
Maximum Output Current	12
Maximum Parasitic Current	<2
Napięcie znamionowe	24
Operating Temperature Range C	-40 à 85
Overcurrent Protection	Oui
Reset Mechanism Type	Manuel (maintenir l'interrupteur enfoncé)

Accessoires

Bloc de fusibles SafetyHub 100 - SafetyHub 100 Fuse Block

Blok bezpiecznikowy SafetyHub 100

582,35 PLN

582,35 PLN ~~788,37 PLN~~

Kup

Bloc de fusibles SafetyHub 150 - SafetyHub 150 Fuse Block

Blok bezpiecznikowy SafetyHub 150

613,37 PLN

613,37 PLN ~~791,61 PLN~~

Kup

Bloc de fusibles à lame ST - 6 circuits avec bus négatif et couvercle - ST Blade Fuse Block - 6 Circuits with Negative Bus and Cover

Blok bezpiecznikowy ST Blade – 6 obwodów z magistralą ujemną i pokrywą

204,63 PLN

204,63 PLN ~~281,96 PLN~~

Kup

Bus Bar commun 150 A - 20 bornes avec couvercle - Common 150A BusBar - 20 Gang with Cover

Szuja zbiorcza 150 A - 20 biegunów z pokrywą

181,40 PLN

Kup

MaxiBus 250A avec capot - six goujons 5/16"-18 - MaxiBus 250A BusBar - Six 5/16

MaxiBus 250A z pokrywą - sześć bolców 5/16"-18

361,25 PLN

Kup

Bornier 30A 10 circuits - Terminal Block 30A - 10 Circuit

Listwa zaciskowa 30A 10 obwodów

58,78 PLN

Kup

Przepust kablowy CableClam 0,68"

101,99 PLN

101,99 PLN ~~118,90 PLN~~

Kup

CableClam with Stainless Steel Dress Cap 0.68" - CableClam with Stainless Steel Dress Cap 0.68

Dławik CableClam z zaślepką wykończeniową ze stali nierdzewnej 0.68"

142,34 PLN

142,34 PLN ~~164,66 PLN~~

Kup

Adapter przełącznika rocker serii Rocker

18,73 PLN

18,73 PLN ~~22,66 PLN~~

Kup

Description détaillée

Zaprojektowany do systemów morskich 24 V DC, regulator Deckhand 7509 firmy BLUE SEA to cyfrowe rozwiązanie do sterowania oświetleniem. Umożliwia precyzyjną regulację natężenia światła dla diod LED bez regulacji, żarówek żarowych i halogenowych. Regulator wyposażony jest w podświetlanie wyjścia z regulowanym opóźnieniem 1–5 minut, co zwiększa bezpieczeństwo podczas schodzenia z pokładu.

Parametry techniczne i funkcjonalność

Deckhand 7509 posiada pamięć ostatniego ustawienia jasności oraz obsługuje kilka miejsc przełączania. Funkcja „bulb saver” chroni żarówki przed przedwczesnym zużyciem w przypadku ładowania akumulatorów pokładowych. Przesunięte nóżki montażowe ułatwiają instalację, pozwalając na montaż kilku regulatorów w bliskiej odległości. Dołączony jest przełącznik chwilowy (ON)-OFF-(ON) do natychmiastowego użytku. Regulator posiada zintegrowaną ochronę przeciwprzepięciową, którą można zresetować poprzez krótką manipulację przełącznikiem.

Integracja i zgodność

Przy napięciu znamionowym 24 V DC i zakresie pracy 18–32 V, regulator obsługuje maksymalny prąd wyjściowy 12 A przy prądzie upływu poniżej 2 mA. Pracuje w szerokim zakresie temperatur od −40°C do 85°C i wykorzystuje sterowanie metodą PWM (modulacja szerokości impulsu). Deckhand 7509 spełnia normy E-marked, ISO 8846 i SAE J1171 dotyczące ochrony przed zapłonem zewnętrznym oraz normy SAE J1455 i SAE J1113. W gamie Deckhand firmy BLUE SEA model 7509 stanowi regulator 24 V DC o prądzie 12 A, oferujący większą zdolność obciążenia niż model 7504 (6 A przy 24 V DC) i wyróżniający się na tle wersji 12 V DC, takich jak 7507 (12 A) lub 7508 (25 A).

Documentations

Type	Nom
	EN - Instructions - Deckhand Dimmer - 24V DC 12A
	EN - Deckhand Dimmer - Deckhand Dimmer - 24V DC 12A

Paiement et sécurité

Vos informations de paiement et données sont traitées de manière sécurisée.

Regulator Deckhand – 24 V DC 12 A

543,38 PLN

543,38 PLN ~~627,77 PLN~~

Complétez votre installation avec des

Équipements complémentaires

Blue Sea Systems

Ampereomierz M2 DC

Ref : 1832-BSS

1.860,25 PLN

1.860,25 PLN ~~2.066,31 PLN~~

Mini ampèremètre OLED- Max 100A - Mini OLED Ammeter - Yellow

Blue Sea Systems

Mini amperomierz OLED – max 100A

Ref : 1732B-BSS

425,09 PLN

425,09 PLN ~~517,91 PLN~~

Mini OLED DC Voltmeter - Yellow - Mini OLED DC Voltmeter - Yellow

Blue Sea Systems

Mini woltomierz prądu stałego OLED - żółty

Ref : 1733-BSS

234,82 PLN

234,82 PLN ~~285,68 PLN~~

M2 DC Multimeter with SoC - M2 DC Multimeter with SoC

Blue Sea Systems

Multimetr M2 DC z SoC

Ref : 1830-BSS

1.810,17 PLN

1.810,17 PLN ~~2.169,64 PLN~~

Coupe-batterie à distance ML-RBS avec commande manuelle - 24V DC 500A - ML-RBS Remote Battery Switch with Manual Control - 24V DC 500A

Coupe-batterie à distance ML-RBS avec commande manuelle - 24V DC 500A - Wiring Diagram

Blue Sea Systems

Wyłącznik baterii zdalny ML-RBS z ręcznym sterowaniem - 24 V DC 500 A

Ref : 7702B-BSS

1.056,45 PLN

1.056,45 PLN ~~1.318,86 PLN~~

Sélecteur de batterie e-Series 4 positions - Mounting Diagram

Blue Sea Systems

Przełącznik baterii e-Series 4 pozycje firmy BLUE SEA

Ref : 9001EB-BSS

280,67 PLN

280,67 PLN ~~313,88 PLN~~

e-Series Selector 3 Position Battery Switch with AFD - e-Series Selector 3 Position Battery Switch with AFD

e-Series Selector 3 Position Battery Switch with AFD - Dimensioned Drawing

Blue Sea Systems

Przełącznik baterii selektywny e-Series 3-pozycyjny z AFD

Ref : 11001-BSS

320,29 PLN

320,29 PLN ~~356,19 PLN~~

12/24V DC Dual USB Charger 4.8A with Intelligent Device Recognition - 12/24V DC Dual USB Charger 4.8A with Intelligent Device Recognition

Blue Sea Systems

Podwójna ładowarka USB 12/24 V DC 4,8 A z inteligentnym rozpoznawaniem urządzeń

Ref : 1045-BSS

222,66 PLN

222,66 PLN ~~262,02 PLN~~

Panneau de disjoncteur étanche WeatherDeck® 12V DC - Gris 8 positions - WeatherDeck® 12V DC Waterproof Circuit Breaker Panel - Gray 8 Positions

Blue Sea Systems

Płytka rozłącznika bezpiecznikowego WeatherDeck® 12 V DC – szary 8-obwodowy

Ref : 4378-BSS

970,29 PLN

970,29 PLN ~~1.144,90 PLN~~

Questions fréquentes

Besoin d'aide ? Contactez-nous

What is the primary function of the Deckhand 7509 variator?

The BLUE SEA Deckhand 7509 dimmer is designed to digitally control the light intensity of unregulated LEDs, incandescent and halogen bulbs in 24 V DC marine systems. It provides precise lighting management on board.

Which types of lights can be controlled by this dimmer?

This dimmer can control the brightness of:

Unregulated LED bulbsIncandescent bulbsHalogen bulbs

What is the nominal voltage required for the Deckhand 7509 autopilot drive?

The Deckhand 7509 drive requires a nominal voltage of 24 V DC (direct current) to operate correctly.

What is the supported operating voltage range for this inverter?

The Deckhand 7509 drive can operate within a voltage range from 18 V to 32 V DC.

What is the maximum output current that the inverter can handle?

The maximum output current that the Deckhand 7509 drive can handle is 12 A.

How does the "bulb saver" function protect the bulbs?

The "bulb saver" function integrated into the Deckhand 7509 dimmer prevents premature aging of bulbs when the boat's batteries are being charged. This helps extend the lifespan of your bulbs.

How does the overcurrent protection in the autopilot work?

The Deckhand 7509 drive has built-in overcurrent protection. If the unit stops working due to an overcurrent, simply correct the excessive load, then hold the drive's switch down until the circuit flashes to reset it.

What temperature range can the Deckhand 7509 drive operate in?

The Deckhand 7509 drive is designed to operate across a wide temperature range, from −40°C to 85°C.

What type of control technology is used for intensity variation?

The Deckhand 7509 dimmer uses Pulse Width Modulation (PWM) to control light intensity.

Does the dimmer store the last lighting intensity setting?

Yes, the Deckhand 7509 dimmer has a memory that stores the last used light intensity setting.

What is the standby current consumption of the autopilot (parasitic current)?

The maximum parasitic current of the Deckhand 7509 drive is less than 2 mA, indicating very low standby power consumption.

How do I enable and adjust the backlit output mode?

To activate the illuminated output mode and set the delay:

1-minute delay: Hold the switch in the high (illuminated) position for 2 seconds. The lights will flash. Release the switch after the first flash, and the lights will remain on for 1 minute.2 to 5-minute delay: Hold the switch in the high (illuminated) position for 1 to 4 seconds after the first flash. Release the switch after 2 to 5 flashes. The lights will remain on for 1 minute per flash, up to a maximum of 5 minutes.

Is a switch supplied with the Deckhand 7509 dimmer?

Yes, the Deckhand 7509 drive is supplied with a momentary (ON)-OFF-(ON) switch.

Do offset mounting brackets provide a specific advantage during installation?

Yes, the offset mounting feet of the Deckhand 7509 autopilot are designed to allow multiple autopilots to be mounted close to each other, optimizing installation space.

What should I do if the autopilot stops working due to an overcurrent?

If the drive stops working due to an overcurrent, you must first correct the excessive load. Then, hold the drive’s switch pressed until the circuit flashes to reset the built-in protection.

Is it possible to control the throttle from multiple locations on the boat?

Yes, the Deckhand 7509 autopilot drive supports multiple switch locations, allowing it to be controlled from different points on your boat.

Is the Deckhand 7509 variable frequency drive suitable for 12V DC electrical systems?

No, the Deckhand 7509 variable speed drive is specifically designed for 24 V DC marine electrical systems and operates within a range of 18 V to 32 V. It is not compatible with 12 V DC systems.

Can this dimmer be used with regulated LEDs?

No, the Deckhand 7509 dimmer is designed to digitally control the intensity of unregulated LEDs, as well as incandescent and halogen bulbs.

What are the safety and compliance standards met by this product?

The Deckhand 7509 variable frequency drive (VFD) complies with several regulatory standards, including:

E-markedISO 8846 (external ignition protection)SAE J1171 (external ignition protection)SAE J1455SAE J1113

Is the Deckhand 7509 variable frequency drive certified for external ignition protection?

Yes, the Deckhand 7509 variable speed drive meets the external ignition protection requirements of ISO 8846 and SAE J1171 standards, ensuring safety in marine environments.