e-Series On-Off Battery Switch - e-Series On-Off Battery Switch

e-Series On-Off Battery Switch - Mounting Diagram

Point relais offert dès 150€ en France
Retrait chez Skysat possible

Installation sur mesure

Faites confiance à Skysat pour installer l'équipement à bord

Demander un devis

Installateurs autour de vous

grâce à notre réseau d'installateurs agréés

Trouvez un installateur

Service d'assistance

Optez pour une aide complémentaire à la pose

Economisești 10%

Blue Sea Systems

9004E-BSS

Comutator baterie pornire/oprire e-Series

Le coupe-batterie BLUE SEA e-Series ON/OFF 9004E est une solution fiable pour isoler une batterie unique vers un groupe de charges, adapté aux moteurs in-bord essence et diesel. Issu de la gamme e-Series, il offre une capacité continue de 350 A, une tension max de 48 V DC, et intègre la protection contre l'allumage ainsi qu'une fonction AFD. Le produit inclut le coupe-batterie 9004E.

Prix publicBénéficier du tarif pro

79,03€

79,03€ ~~88,50€~~

TTC Expediere calculată la momentul plății.

Stoc epuizat

Point relais offert dès 150€ en France
Retrait chez Skysat possible

Installation sur mesure

Faites confiance à Skysat pour installer l'équipement à bord

Demander un devis

Installateurs autour de vous

grâce à notre réseau d'installateurs agréés

Trouvez un installateur

Service d'assistance

Optez pour une aide complémentaire à la pose

Caractéristiques techniques

Destinația produsului	Gestion et déconnexion d'une seule batterie pour moteurs in-bord essence et diesel
Tip de comutator	Monocircuit ON-OFF
Curent continuu (A)	350
Curent intermitent (A)	600
Curent de pornire (A)	1200
Tensiune DC maximă	48
Număr de poli	1
Poziții	2
Protecție AFD	Oui
Tip bornă	Goujons en cuivre étamé
Dimensiune bornă	3/8"-16 (M10)
Tip conexiune cablare	Cosses à œillet pour câble 4/0 AWG
Tip control	Manuel rotatif
Tip de montaj	Montage en surface ou sur panneau arrière/avant
Indice IP	IP66
Interval de tensiune de funcționare	0-48
Diametrul decupajului panoului (mm)	40.39
Greutate	0.43
Dimensiuni (L x H x P)	97.79 x 97.79 x 76.20
Conformitate ABYC	Oui
Culoare actuator	Rouge
Stil actuator	Rotatif
Alternator Field Disconnect Wiring	F1, F2
Amperaj	350
Ignition Protection Standards List	UL 1500, SAE J1171
Installation Location General	Près des batteries
Tipul instalației	Montage en surface; Montage sur panneau arrière; Montage sur panneau avant
Indicator luminos	Non
Mounting Centers Mm	76.20
Mărimea șuruburilor de montaj (metric)	M6
Tensiune nominală	48V
Operation Restriction Engine Running	Ne pas actionner moteur tournant
Număr de prize	0
Tipul produsului	Coupe-batterie
Funcție a comutatorului	Déconnexion/Connexion de batterie
Terminal Stud Design Type	Monobloc
Terminal Stud Torque Nm	15.82
Certificare UL	UL 1107

Accessoires

MaxiBus 250A avec capot - six goujons 5/16"-18 - MaxiBus 250A BusBar - Six 5/16

MaxiBus 250A cu capac - șase bolțuri 5/16"-18

81,48€

Cumpără

Bus Bar commun 150 A - 20 bornes avec couvercle - Common 150A BusBar - 20 Gang with Cover

Bară omnibus comună 150 A - 20 borne cu capac

40,92€

Cumpără

Bloc de fusibles SafetyHub 100 - SafetyHub 100 Fuse Block

Bloc de siguranțe SafetyHub 100

131,35€

131,35€ ~~177,83€~~

Cumpără

Bloc de fusibles SafetyHub 150 - SafetyHub 150 Fuse Block

Bloc de siguranțe SafetyHub 150

138,35€

138,35€ ~~178,56€~~

Cumpără

Bloc-fusible terminal MRBF - 30 à 300 A - MRBF Terminal Fuse Block - 30 to 300A

Bloc-fuzibil terminal MRBF - 30 până la 300 A

34,46€

34,46€ ~~39,72€~~

Cumpără

Porte fusible ANL 35-300A avec couvercle - ANL Fuse Block with Insulating Cover - 35 to 300A

Port-fuzibil ANL 35-300 A cu capac

24,54€

24,54€ ~~35,94€~~

Cumpără

Porte fusible MEGA AMG 100-300A avec couvercle - MEGA® / AMG® Fuse Block - 100-300A with Cover

Port-fuzibil MEGA AMG 100-300 A cu capac

22,39€

22,39€ ~~32,40€~~

Cumpără

Jeu de 60 étiquettes noires - Black 60 Label Set

Set de 60 etichete negre

10,37€

10,37€ ~~12,48€~~

Cumpără

Presă-etanșă CableClam 0,68"

23,00€

23,00€ ~~26,82€~~

Cumpără

Presă-etanșă CableClam 1.40"

25,91€

25,91€ ~~30,72€~~

Cumpără

Description détaillée

Comutatorul bateriei BLUE SEA e-Series ON/OFF 9004E este proiectat pentru gestionarea fiabilă a unei singure baterii către un grup de consumatori, în special pentru motoare inbord pe benzină și motorină. Face parte din gama e-Series a Blue Sea Systems, oferind o capacitate continuă de 350 A și o tensiune maximă de funcționare de 48 V CC, deosebindu-se de modelele m-Series (300 A, 48 V CC) destinate motoarelor outboard și celor mici, precum și de modelele HD-Series (500-600 A, 32 V CC) pentru motoarele diesel mari.

Caracteristici tehnice și protecție

Acest comutator asigură o performanță electrică cu o capacitate de pornire de 1 200 A timp de 30 de secunde și o capacitate intermitentă de 600 A timp de 5 minute. Bolțurile terminalelor sunt din cupru cositorit de 3/8"-16 (M10), asigurând o conductivitate maximă și rezistență la coroziune. Designul lor monobloc reduce riscul de supraîncălzire și lungimea de 22,22 mm (7/8") permite montarea mai multor terminale de cabluri 4/0 AWG (95 mm²). Se recomandă respectarea unui cuplu de strângere de 15,82 N·m (140 in-lb) pentru conexiuni.

Siguranță și instalare

Modelul 9004E integrează protecție împotriva aprinderii (ignition protected), conform normelor UL 1500 și SAE J1171, fiind sigur pentru instalare pe ambarcațiuni cu motoare pe benzină. Funcția sa de deconectare a câmpului alternatorului (AFD) protejează diodele alternatorului dacă întrerupătorul este pus pe poziția OFF în timp ce motorul este în funcțiune. Carcasa permite montaj pe suprafață sau pe panou posterior și este certificată IP66, asigurând protecție împotriva jeturilor puternice de apă. Este conform cu cerințele American Boat and Yacht Council (ABYC) pentru întrerupătoarele de baterie, omologat UL 1107 și certificat CE conform ISO 8846.

Documentations

Type	Nom
	EN - Instructions - e-Series On-Off Battery Switch
	EN - M Series, E Series, And Hd Series Battery Switch Ope... - e-Series On-Off Battery Switch
	EN - E Series Battery Switches - e-Series On-Off Battery Switch
	EN - Manual - e-Series On-Off Battery Switch
	EN - Certificate - e-Series On-Off Battery Switch
	EN - Certificate - e-Series On-Off Battery Switch
	EN - Certificate - e-Series On-Off Battery Switch

Avis de l'expert

Pol CONIN

Responsabil digital

« Technical analysis: BLUE SEA e-Series 9004E battery switch with AFD »

The BLUE SEA e-Series ON/OFF 9004E battery switch is a practical and reliable solution for managing power supply to embedded systems, particularly on sailboats and motorboats equipped with inboard gasoline or diesel engines. Its continuous rated capacity of 350 A DC and maximum voltage of 48 V DC make it suitable for medium-sized electrical configurations, distinguishing it from the m-Series for small applications and the HD-Series for high-power systems. The inclusion of the AFD (Alternator Field Disconnect) function is a major safety feature, protecting the alternator from potential damage in the event of an unexpected battery cut-off while the engine is running—a scenario commonly encountered in less optimized installations.

Installation is flexible with options for surface or rear-panel mounting, and the 3/8"-16 (M10) tinned copper studs with a length of 22.22 mm facilitate the connection of heavy-gauge cables (up to 4/0 AWG). It is essential to adhere to the tightening torque of 15.82 N·m (140 in-lb) to ensure optimal electrical connection and prevent overheating. This model integrates seamlessly into electrical systems compliant with ABYC and UL standards, and its IP66 rating ensures resistance to demanding marine environments. While it does not offer battery combining functions like the Dual Circuit Plus models, its simple ON/OFF design is ideal for isolating a single battery or a dedicated battery bank for a specific load, such as starting or main service, without added complexity.

Durabilité

Facilité d'installation

Rapport performance / prix

Paiement et sécurité

Vos informations de paiement et données sont traitées de manière sécurisée.

Comutator baterie pornire/oprire e-Series

79,03€

79,03€ ~~88,50€~~

Complétez votre installation avec des

Équipements complémentaires

Relais de charge automatique ML-ACR avec contrôle manuel - 12V DC 500A - ML-ACR Automatic Charging Relay with Manual Control - 12V DC 500A

Relais de charge automatique ML-ACR avec contrôle manuel - 12V DC 500A - Wiring Diagram

Blue Sea Systems

Releu de încărcare automat ML-ACR cu control manual - 12 V CC 500 A

Ref : 7622B-BSS

245,47€

245,47€ ~~362,28€~~

Blue Sea Systems

Ampermetru M2 DC

Ref : 1832-BSS

419,60€

419,60€ ~~466,08€~~

Mini ampèremètre OLED- Max 100A - Mini OLED Ammeter - Yellow

Blue Sea Systems

Mini ampermetru OLED – Max. 100A

Ref : 1732B-BSS

95,88€

95,88€ ~~116,82€~~

Panneau de disjoncteur Contura 4 positions - Water Resistant Circuit Breaker Panel 4 Position-Black

Blue Sea Systems

Panou de siguranțe Contura 4 poziții

Ref : 8372-BSS

177,65€

177,65€ ~~198,96€~~

Panneau de disjoncteur Contura 8 positions - Water Resistant Circuit Breaker Panel 8 Position-Black

Blue Sea Systems

Panou de siguranțe Contura 8 poziții

Ref : 8371-BSS

307,55€

307,55€ ~~339,72€~~

Panneau de disjoncteur étanche WeatherDeck® 12V DC - Gris 8 positions - WeatherDeck® 12V DC Waterproof Circuit Breaker Panel - Gray 8 Positions

Blue Sea Systems

Panou de întrerupător etanș WeatherDeck® 12 V CC - Gri 8 poziții

Ref : 4378-BSS

218,86€

218,86€ ~~258,24€~~

Tableau électrique 12 volts CC 4 positions

Blue Sea Systems

Tablou electric 12 volți CC 4 poziții

Ref : 1216-BSS

263,45€

263,45€ ~~327,20€~~

Bloc de fusibles à lame ST - 12 circuits avec bus négatif et couvercle - ST Blade Fuse Block - 12 Circuits with Negative Bus and Cover

Bloc de fusibles à lame ST - 12 circuits avec bus négatif et couvercle - Dimensioned Drawing

Blue Sea Systems

Bloc de siguranțe ST Blade - 12 circuite cu bară negativă și capac

Ref : 5026B-BSS

56,82€

56,82€ ~~79,50€~~

Disjoncteur série 285 montage en surface 25A - 285-Series Circuit Breaker - Surface Mount 25A

Disjoncteur série 285 montage en surface 25A - Dimensioned Drawing

Blue Sea Systems

Disjunctor serie 285 montaj la suprafață 25 A

Ref : 7180-BSS

59,48€

59,48€ ~~73,02€~~

Disjoncteur série 187 - Montage en surface 80 A - 187-Series Circuit Breaker - Surface Mount 80A

Disjoncteur série 187 - Montage en surface 80 A - Dimensioned Drawing

Blue Sea Systems

Disjunctor serie 187 - Montaj la suprafață 80 A

Ref : 7142B-BSS

103,81€

103,81€ ~~117,38€~~

12/24V Dual USB 4.8A Chargers - Switch Mount - 12/24V Dual USB 4.8A Chargers - Switch Mount

Blue Sea Systems

Încărcătoare dublu USB 12/24 V 4,8 A - Pentru montare pe întrerupător

Ref : 1039-BSS

48,18€

48,18€ ~~57,72€~~

Alarme Floyd Bell Turbo Série - Floyd Bell Turbo Series Alarm

Blue Sea Systems

Alarma Floyd Bell Turbo Series

Ref : 1070B-BSS

29,27€

29,27€ ~~34,98€~~

Questions fréquentes

Besoin d'aide ? Contactez-nous

What is the main function of the BLUE SEA e-Series ON/OFF 9004E battery switch?

This battery isolator is designed to disconnect a single battery or a battery bank in an emergency, or when the boat is not in use. It allows reliable management of power distribution from a battery to a load bank, particularly for inboard gasoline and diesel engines.

What is the continuous nominal current rating of this battery switch?

The BLUE SEA e-Series ON/OFF 9004E battery switch has a continuous rated current of 350 A.

What is the maximum operating voltage supported by the 9004E model?

The maximum operating voltage for this battery switch is 48 V DC.

Is the 9004E battery switch protected against ignition?

Yes, model 9004E is ignition-protected. It meets UL 1500 and SAE J1171 standards, making it safe for installation on gasoline-powered boats. It is also ISO 8846 certified.

What is the specific feature of the terminal studs on the e-Series battery isolator?

The terminal studs are made of tin-plated copper, 3/8"-16 (M10), providing maximum conductivity and corrosion resistance. Their one-piece design reduces the risk of overheating, and their 22.22 mm (7/8") length allows multiple cable terminals to be fitted.

What is the Alternator Field Disconnect (AFD) function and what is it used for?

The Alternator Field Disconnect (AFD) function protects the alternator's diodes. It activates if the switch is turned OFF while the engine is running, preventing damage to the alternator.

What is the difference between Blue Sea Systems e-Series, m-Series and HD-Series battery switches?

The e-Series models (such as the 9004E) have a continuous output of 350 A and are designed for inboard gasoline and diesel engines. The m-Series models have a continuous output of 300 A and are intended for outboards and small gasoline or diesel engines. The HD-Series models have a continuous output of 500–600 A and are for large diesel engines.

What is the ingress protection (IP) rating of this battery switch's housing?

The 9004E battery switch case is IP66 certified, ensuring protection against powerful water jets.

What are the starting and intermittent capacities of the 9004E battery switch?

Cold cranking amps (30 seconds): 1 200 AIntermittent capacity (5 minutes): 600 A

How many battery inputs and switch positions does this model have?

The BLUE SEA e-Series ON/OFF 9004E battery switch is a single-circuit model. It has one battery input and two switching positions (ON/OFF).

What are the mounting options available for this battery switch?

The 9004E battery switch housing allows surface mounting or rear panel mounting.

Is the 9004E battery switch compatible with mounting hole patterns from other brands?

Yes, the 9004E battery switch housing design is compatible with most PERKO and Guest battery switch mounting hole patterns.

What is the recommended torque for terminal connections?

The recommended torque for terminal stud connections is 15.82 N·m (140 in-lb).

What type of cable is recommended to meet the current specifications of the battery switch?

It is recommended to use 4/0 AWG (95mm²) battery cables to meet the nominal current specifications. Reducing cable size will result in reduced current capacity.

Where should the battery switch be installed?

The battery isolator must be installed in an easily accessible location close to the batteries.

What safety precautions must be taken before installing the battery switch?

Before any installation, it is imperative to disconnect the positive terminal of the battery. It is also advisable to consult a marine electrician for proper wiring.

How to connect the Alternator Field Disconnect (AFD) function?

To enable the AFD function, disconnect the wire running from the alternator to the voltage regulator. Then connect one end of the wire to terminal F1 of the switch and the other end to terminal F2.

What are the safety and compliance standards met by this battery switch?

This battery switch complies with all American Boat and Yacht Council (ABYC) requirements for battery switches. It is also UL 1107 certified for electrical power switches and meets external ignition protection requirements UL 1500 and SAE J1171. It is CE and ISO 8846 certified.

What are the mounting center dimensions for the 9004E battery switch?

The mounting centers of the 9004E battery switch are spaced 3.00" (76 mm) apart.

Can the battery isolator switch be turned off while the engine is running?

No, it is imperative not to set the switch to OFF while the engine is running. It is recommended to turn off all electrical devices before handling the switch.