Comutator de baterie cu comandă la distanță ML-RBS cu comandă manuală cu declanșare automată - 12 V

The BLUE SEA ML-RBS 7713-BSS is a remote-controlled battery switch designed for managing battery banks in marine environments. It allows you to connect or disconnect a battery bank from a load, or isolate connected battery banks. It also features manual control with an automatic unlock function for direct operation.

Thanks to its bistable magnetic latching design, the ML-RBS 7713-BSS has a very low continuous current consumption of less than 13 mA at 25°C. It only draws a higher current (less than 7 A at 25°C for 20 ms) during state changes (activation or deactivation), which optimizes the system's power consumption.

The ML-RBS 7713-BSS battery switch offers the following current ratings:

Continuous current: 500 A DC
Intermittent current (5 minutes): 700 A DC
Starting current (30 seconds): 1450 A DC
These values are achieved with double-sized 4/0 AWG cables (2x 120 mm²).

Yes, the ML-RBS 7713-BSS is equipped with a manual control. This function allows direct ON/OFF control with or without power supply, and includes a "LOCK OFF" feature for safe maintenance of the electrical system.

The silver alloy contacts of the ML-RBS 7713-BSS provide high reliability for switching loads under voltage. They ensure consistent performance and increased durability, even when switching high currents.

Yes, the battery switch is designed to resist corrosion. It is equipped with 3/8"-16 (M10) tinned copper studs that provide maximum conductivity and excellent corrosion resistance in marine environments.

The ML-RBS 7713-BSS has a mechanical endurance of 100,000 cycles. For load switching, it can perform 10,000 cycles at 300 A under 12 V DC, ensuring a long lifespan even under intensive use.

The ML-RBS 7713-BSS battery isolator complies with the external ignition protection requirements of ISO 8846 and SAE J1171. It is also CE marked and rated IP66, meaning it is protected against powerful water jets.

It is recommended to install the ML-RBS 7713-BSS battery switch as close as possible to the battery bank. This proximity minimizes voltage drop and optimizes the performance of the electrical system.

The 3/8"-16 (M10) tin-plated copper studs on the battery switch can accommodate 3/8" (M10) cable terminals. The battery switch is designed to handle cables up to double 4/0 AWG (2x 120 mm²) to reach its maximum current ratings.

The ML-RBS 7713-BSS battery switch is fitted with 3/8"-16 (M10) stud connectors, providing a sturdy and reliable connection for battery cables.

The maximum recommended torque for connection studs is 140 in-lb (15.8 N•m). It is important to respect this value to ensure a secure connection and avoid damaging the studs or cables.

Yes, the ML-RBS 7713-BSS retail units include a remote control switch, model PN 2155. This switch is SPDT (Single Pole Double Throw) ON-ON type and allows remote control of the battery switch state.

Yes, the ML-RBS 7713-BSS battery switch is rated IP66. This means it is protected against powerful water jets, making it suitable for marine environments where it may be exposed to moisture and splashing.

No, the specific ML-RBS 7713-BSS model is designed and rated for 12V DC electrical systems. For 24V DC systems, other models in the Blue Sea Systems ML series, such as PN 7717, should be used as they are specifically designed for this voltage.

Yes, the ML-RBS 7713-BSS can be used to combine multiple battery banks or to isolate battery banks that are connected. It provides the flexibility needed to efficiently manage the power supply of different battery banks.

Yes, the ML-RBS 7713-BSS battery switch provides an LED output to remotely indicate the switch status. The PN 2155 remote control switch, included with retail units, also features an LED for this visual indication.

The BLUE SEA ML-RBS 7713-BSS battery switch is equipped with a single manual control for direct operation. This feature provides several options:

ON/OFF control: You can manually turn the battery switch ON or OFF, whether the system is powered or not.LOCK OFF function: For safe maintenance of the electrical system, you can lock the battery switch in the OFF position.This manual control capability sets it apart from the solenoid versions of the ML-Series (PN 7718/7719), which do not offer this feature.

For optimal performance and to minimize voltage drop, the ML-RBS battery switch must be installed as close as possible to the battery bank. It is also recommended to install a remote control switch (SPDT or SPST) in a convenient location near other electrical controls or a passageway for quick access in case of emergency.

The connection studs are made of tinned copper in size 3/8"-16 (M10) and must be tightened to a maximum torque of 15.8 N•m (140 in-lb) to ensure maximum conductivity and corrosion resistance.