Tablou electric 12 volți CC 4 poziții

This electrical panel is specifically designed to operate with a 12-volt DC power supply.

The BLUE SEA 1216-BSS electrical panel is equipped to manage four separate circuits.

The panel is supplied with four A-series circuit breakers, each rated at 15 Amperes. These circuit breakers are pre-installed for immediate protection of your circuits.

The maximum capacity of the main bus for the entire electrical panel is 100 Amps. Each individual circuit is protected by a 15 Amp circuit breaker.

The compact dimensions of the display are:

Height: 120.65 mmWidth: 123.95 mmDepth: 76.2 mmWeight: 0.61 kg

Yes, the positive, negative and ground buses are pre-wired, which greatly simplifies the installation process and reduces assembly time.

No, this electrical panel is designed for protected environments. It is ideal for installation inside a cabin or in a closed console, but it is not suitable for areas directly exposed to the elements, unlike other Blue Sea panel series.

The panel is equipped with ON status LEDs for each circuit position, allowing quick visualisation of each circuit's state. Additionally, the labelling positions are backlit for better visibility in low-light conditions.

The panel is made of marine-grade aluminum and features a two-part polyurethane finish in slate gray, providing durability and a refined appearance.

The panel comes with the following accessories to facilitate its installation and use:

A set of 4205 square format labels, including 30 common CC labels. A cutting template for precise installation. Detailed installation instructions.

Installation requires cutting an opening in the mounting surface using the provided template. Positive, negative, and ground buses are pre-wired to simplify main connections. Detailed instructions are included to guide the installation process.

The panel is supplied with 15 Amp circuit breakers. While it is technically possible to replace the circuit breakers with others from the A series with a different amperage, it is crucial to ensure that the chosen amperage is suitable for the connected circuit and does not exceed the maximum capacity of the wiring or the main bus of the panel (100A).

The panel is supplied with a set of 30 common 4205 square-format circuit card labels. These labels are designed to be inserted into the backlit slots of the panel and can be changed according to your circuit requirements.

No, this electrical panel is specifically designed for 12 V DC systems. Using it with a 24 V DC system is not recommended and could damage the panel or connected equipment.

The panel itself does not provide active protection against reverse polarity. It is essential to ensure that the positive and negative power connections are correctly connected during installation to prevent any damage.

Each circuit position is equipped with an ON indicator LED. When the circuit breaker is in the "ON" position and the circuit is powered, the corresponding LED lights up, indicating that the circuit is active.

Yes, although designed for marine applications, this 12 V DC electrical panel can be used in other specialized vehicles such as motorhomes or converted vans, provided it is installed in a protected environment and voltage (12 V DC) and amperage requirements are met.

Circuit breakers are designed to protect electrical circuits from overloads and short circuits. In case of a problem, the circuit breaker trips automatically, cutting off power to the affected circuit to prevent damage to equipment or wiring. They can be manually reset once the issue is resolved.

The panel is equipped with circuit breakers for each circuit. However, it is generally recommended to install a main fuse or appropriately rated circuit breaker on the main 12V DC power cable, upstream of the panel, to protect the entire system from major overload or short-circuit on the main bus.

Yes, the BLUE SEA 1216-BSS electrical panel is designed to simplify installation on board. It features pre-wired positive, negative, and ground buses, reducing initial wiring time and complexity.

The following accessories are included to facilitate installation:

A cutting template for precise fitting during integration. Detailed installation instructions to guide you step by step. A set of 4205 square-format labels, including 30 common DC circuit labels, for clear function identification. Its compact dimensions (120.65 mm height, 123.95 mm width, 76.2 mm depth) and lightweight 0.61 kg design also make it easy to integrate in various protected spaces, such as cabin interiors or enclosed consoles.