Deckhand Dimmer - 24V DC 6A - Deckhand Dimmer - 24V DC 6A

Deckhand Dimmer - 24V DC 6A - Dimensioned Drawing

Point relais offert dès 150€ en France
Retrait chez Skysat possible

Installation sur mesure

Faites confiance à Skysat pour installer l'équipement à bord

Demander un devis

Installateurs autour de vous

grâce à notre réseau d'installateurs agréés

Trouvez un installateur

Service d'assistance

Optez pour une aide complémentaire à la pose

Economisești 17%

Blue Sea Systems

7504-BSS

Variator Deckhand - 24 V CC 6 A

Q: What is the Deckhand 7504-BSS variable autotransformer from BLUE SEA?

The BLUE SEA Deckhand 7504-BSS dimmer is a digital device designed to control the light intensity of onboard boat lighting. It is specifically designed for 24 V DC systems and manages unregulated LEDs, incandescent bulbs, and halogen lights.

Q: What types of lighting can this dimmer control?

This dimmer is designed to control the intensity of unregulated LEDs, incandescent bulbs, and halogen lights.

Q: What is the required operating voltage for this variable speed drive?

The Deckhand 7504-BSS drive operates at a nominal voltage of 24 V DC. Its operating range is from 18 V to 32 V DC.

Q: What is the maximum output current that this variable frequency drive can handle?

The maximum output current that the Deckhand 7504-BSS drive can deliver is 6 amperes (6 A).

Q: How does the Deckhand dimmer control the brightness of the lights?

Brightness control is achieved via pulse-width modulation (PWM), ensuring smooth and gradual variation in light intensity.

Q: What is the 'Bulb Saver' function and how does it work?

The 'Bulb Saver' function is an integrated system that extends the lifespan of bulbs. It prevents excessive aging of bulbs when the boat's batteries are being charged.

Q: How to use the illuminated output with delay function?

To activate the illuminated output function:For a one-minute delay: Hold the switch in the high (illuminated) position for 2 seconds. The lights will flash. Release the switch after the first flash and the lights will remain on for 1 minute. For a 2 to 5-minute delay: Hold the switch in the high (illuminated) position for 1 to 4 seconds after the first flash. Release the switch after 2 to 5 flashes. The lights will remain on for 1 minute per flash, up to a maximum of 5 minutes.

Q: What to do if the autopilot stops working due to an overcurrent?

The Deckhand drive is equipped with built-in overcurrent protection. If the unit stops working, first correct the cause of the overload (excessive current load), then hold the drive switch pressed until the circuit flashes to reset it.

Q: Does the dimmer store the last brightness setting?

Yes, the Deckhand dimmer includes a memory function that stores the last used light intensity setting.

Q: What is the operating temperature range of this variable frequency drive?

The inverter is designed to operate across a wide temperature range, from -40°C to 85°C.

Conçu pour les systèmes 24 V CC, le variateur Deckhand 7504-BSS de BLUE SEA offre un contrôle numérique précis de l'intensité lumineuse pour les LED non régulées, les ampoules à incandescence et halogènes, avec un courant de sortie maximal de 6 A. Ce modèle se positionne comme la solution 24 V 6 A de la gamme Deckhand, proposant des fonctionnalités telles qu'une sortie illuminée temporisée et une mémoire de réglage. Il inclut un interrupteur momentané (ON)-OFF-(ON).

Tensiune: 24 V

12 V 24 V

Curent: 6 A

6 A 12 A

Prix publicBénéficier du tarif pro

102,30€

102,30€ ~~124,32€~~

TTC Expediere calculată la momentul plății.

Stoc epuizat

Point relais offert dès 150€ en France
Retrait chez Skysat possible

Installation sur mesure

Faites confiance à Skysat pour installer l'équipement à bord

Demander un devis

Installateurs autour de vous

grâce à notre réseau d'installateurs agréés

Trouvez un installateur

Service d'assistance

Optez pour une aide complémentaire à la pose

Caractéristiques techniques

Tip interfață de control	Interrupteur momentané (ON)-OFF-(ON)
Tip control	Modulation de largeur d'impulsion (PWM)
Sisteme iluminat compatibile	LED non régulées, incandescentes, halogènes
Zone Control	Non
Interval de tensiune de funcționare	18 à 32
Consum electric tipic	<0.048
Tipul instalației	Montage sur panneau
Dimensiuni produs	82.55 x 88.9 x 50.8 mm
Variator compatibil	Oui
Conținut pachet	Variateur Deckhand, interrupteur momentané (ON)-OFF-(ON)
Cod de bare al produsului	SK-000051475
Certificări	E marked, ISO 8846, SAE J1171, SAE J1455, SAE J1113
Maximum Parasitic Current	<2 mA
Curent maxim de ieșire	6 A
Tensiune nominală	24 V CC
Odoo Category Full Path	Marchandise / NAVICO GROUP / 13 - Blue Sea BSS (35)
Interval de temperatură de funcționare	−40°C à 85°C
SKU al produsului	7504-BSS
Tipul produsului	Variateur d'intensité

Description détaillée

Proiectat pentru optimizarea iluminatului la bord, variatorul Deckhand 7504-BSS de la BLUE SEA este o soluție digitală de control al intensității luminoase pentru sistemele de 24 V CC. Permite gestionarea LED-urilor ne-reglate, a becurilor cu incandescență și a celor cu halogen. Funcția sa de ieșire iluminată oferă o temporizare ajustabilă pentru siguranța la îmbarcare și debarcare, cu opțiuni între 1 și 5 minute. Variatorul suportă multiple locații pentru întrerupătoare și integrează o memorie pentru ultima setare a intensității.

Funcționalități și performanțe

Funcția "bulb saver" integrată prelungește durata de viață a becurilor în timpul încărcării bateriilor navei. Cleme de montaj decalate facilitează instalarea alăturată a mai multor variatoare, optimizând spațiul în tabloul electric. O protecție integrată împotriva suprasarcinilor asigură siguranța circuitului; sistemul poate fi resetat menținând apăsat întrerupătorul variatorului până când circuitul clipește.

Specificații tehnice și conformitate

Funcționând la o tensiune nominală de 24 V CC, cu un interval de operare între 18 V și 32 V, variatorul Deckhand 7504 livrează un curent maxim de ieșire de 6 A. Consumul său de repaus este sub 2 mA, iar operarea se realizează într-un interval extins de temperatură, de la −40°C la 85°C. Controlul luminozității se realizează prin modulație de lățime a impulsurilor (PWM), asigurând o variație lină. Acest produs este conform cu normele E, ISO 8846 și SAE J1171 pentru protecția împotriva aprinderii externe, atestând fiabilitatea sa în medii marine.

Poziționare în gama BLUE SEA

În gama Deckhand a BLUE SEA, acest model 7504 se poziționează ca referință pentru 24 V CC 6 A. Completează variantele de 12 V CC disponibile, precum 7506 (6 A), 7507 (12 A) și 7508 (25 A), precum și alte modele de 24 V CC cu putere mai mare, precum 7509 (12 A). Acest variator este proiectat pentru a înlocui referințe anterioare, precum modelele 7501 sau 7502, oferind performanțe îmbunătățite în ceea ce privește curentul și funcționalități pentru sistemele de 24 V.

Documentations

Type	Nom
	EN - Instructions - Deckhand Dimmer - 24V DC 6A
	EN - Deckhand Dimmer - Deckhand Dimmer - 24V DC 6A

Paiement et sécurité

Vos informations de paiement et données sont traitées de manière sécurisée.

Variator Deckhand - 24 V CC 6 A

102,30€

102,30€ ~~124,32€~~

Questions fréquentes

Besoin d'aide ? Contactez-nous

What is the Deckhand 7504-BSS variable autotransformer from BLUE SEA?

The BLUE SEA Deckhand 7504-BSS dimmer is a digital device designed to control the light intensity of onboard boat lighting. It is specifically designed for 24 V DC systems and manages unregulated LEDs, incandescent bulbs, and halogen lights.

What types of lighting can this dimmer control?

This dimmer is designed to control the intensity of unregulated LEDs, incandescent bulbs, and halogen lights.

What is the required operating voltage for this variable speed drive?

The Deckhand 7504-BSS drive operates at a nominal voltage of 24 V DC. Its operating range is from 18 V to 32 V DC.

What is the maximum output current that this variable frequency drive can handle?

The maximum output current that the Deckhand 7504-BSS drive can deliver is 6 amperes (6 A).

How does the Deckhand dimmer control the brightness of the lights?

Brightness control is achieved via pulse-width modulation (PWM), ensuring smooth and gradual variation in light intensity.

What is the 'Bulb Saver' function and how does it work?

The 'Bulb Saver' function is an integrated system that extends the lifespan of bulbs. It prevents excessive aging of bulbs when the boat's batteries are being charged.

How to use the illuminated output with delay function?

To activate the illuminated output function:

For a one-minute delay: Hold the switch in the high (illuminated) position for 2 seconds. The lights will flash. Release the switch after the first flash and the lights will remain on for 1 minute. For a 2 to 5-minute delay: Hold the switch in the high (illuminated) position for 1 to 4 seconds after the first flash. Release the switch after 2 to 5 flashes. The lights will remain on for 1 minute per flash, up to a maximum of 5 minutes.

What to do if the autopilot stops working due to an overcurrent?

The Deckhand drive is equipped with built-in overcurrent protection. If the unit stops working, first correct the cause of the overload (excessive current load), then hold the drive switch pressed until the circuit flashes to reset it.

Does the dimmer store the last brightness setting?

Yes, the Deckhand dimmer includes a memory function that stores the last used light intensity setting.

What is the operating temperature range of this variable frequency drive?

The inverter is designed to operate across a wide temperature range, from -40°C to 85°C.

What is the power consumption of the drive in standby (parasitic) mode?

The Deckhand drive’s maximum parasitic consumption is less than 2 mA.

Is it possible to use this inverter with 12 V DC electrical systems?

No, this specific model (7504-BSS) is designed for 24 V DC systems. BLUE SEA offers other Deckhand models for 12 V DC systems.

Can multiple switches be connected to the Deckhand dimmer to control lights from different locations?

Yes, the Deckhand dimmer is designed to support multiple switch locations, allowing brightness control from different points aboard.

How do offset mounting tabs facilitate installation?

The offset mounting tabs allow multiple drives to be installed side by side in a compact manner, thus optimizing the space available on the electrical panel.

What type of switch is included with the Deckhand 7504-BSS dimmer?

The autopilot drive comes with a momentary switch (ON)-OFF-(ON) (PN 8216 reference).

How to connect the inverter to the boat's electrical system?

The dimmer is connected as follows:

The red wire connects to the +24V DC power supply.The two black wires connect to ground (negative bus bar).The blue wire connects to the lamp.The grey and white wires are the inputs for the switch (Down Input and Up Input).A fuse must be installed on the +24V DC line before the dimmer.

What are the dimensions of the Deckhand 7504-BSS autopilot drive?

The Deckhand 7504-BSS drive has a width of 3.25 inches (82.55 mm) and a height of 3.5 inches (88.9 mm).

Is the Deckhand 7504-BSS variable frequency drive compliant with marine standards?

Yes, this inverter is E-rated and compliant with external ignition protection requirements of ISO 8846 and SAE J1171 standards. It also meets SAE J1455 and SAE J1113 standards.

Can I use this dimmer for LEDs that already have an integrated driver?

No, the Deckhand 7504-BSS dimmer is specifically designed for unregulated LEDs, as well as incandescent and halogen bulbs. Using it with already regulated LEDs may not work correctly or could damage the dimmer or lights.

Is it necessary to add a fuse when installing the variator?

Yes, it is necessary to install a fuse on the +24V DC power line before the inverter to ensure circuit protection, as shown in the installation diagram.