Lumină de punte plată - 3MN - Babord Roșu - 112,5°

This Mantagua navigation light has a luminous range of 3 nautical miles (3 NM).

This deck light has a maximum power consumption of 3.2 Watts.

This light is specifically designed to be installed on the port side of the vessel, emitting a red light.

This port-side light has a 112.5° visibility angle.

This deck light has an IP67 waterproof rating, ensuring resistance to temporary immersion and dust.

The operating temperature range for this Mantagua light is from -10 °C to +65 °C.

This navigation light must be mounted on a horizontal surface. The light's axis of symmetry must be parallel to the vessel's axis.

General installation steps are as follows:

Separate the base from the light body by removing the 3 socket head screws. Drill the cable gland hole in the base and feed the power cable through. Secure the base to a horizontal surface with 2 M3 screws (not supplied), applying silicone sealant under the base for waterproofing. Connect the stripped wires from the cable to the terminal blocks inside the light using the supplied red terminals. Apply silicone sealant inside the cable gland cavity and over the heads of the mounting screws. Reattach the light body to the base and tighten the 3 socket head screws.

No, the M3 mounting screws required for the base are not included with the light.

Yes, it is strongly recommended to coat the underside of the transom bracket with silicone sealant before final installation, as well as the inside of the cable gland cavity and the heads of the mounting screws, to ensure perfect watertightness.

An Allen key size 3 mm is required to remove the 3 socket head screws and separate the base from the light body.

No, there is no specific polarity to respect when wiring this light.

This light is designed for mounting on a horizontal surface. For vertical mounting (on a vertical surface), a specific stainless steel bracket (referenced CCMAFF00009 from Mantagua) is required and is not included with the light.

This light is compatible with a supply voltage of 9 to 30 Volts DC only.

This light is compatible with 9 to 30 V DC onboard electrical systems. Verify your system’s voltage to ensure compatibility.

This light is suitable for vessels requiring a port navigation light with a 3 nautical mile range, in accordance with current maritime regulations for this range.

This Mantagua navigation light comes with a 2-year manufacturer warranty.