Ampérmetr shunt 450 A 50 mV

An ammeter shunt is a fundamental electrical component used to measure high currents in an installation. It works by diverting a small portion of the current through a precision resistor, which generates a proportional voltage drop. This voltage is then read by a monitor or an energy management system to display the total current flowing through the circuit. It is essential for monitoring electrical systems, particularly in marine installations.

This BEP shunt is designed to measure currents up to 450 amperes (450A). It outputs a 50 millivolt (50mV) signal when the maximum current of 450 amperes flows through it, which is then interpreted by a measuring device.

Selecting a 450A/50mV shunt is justified for installations requiring high-current measurement, such as on large vessels or systems with multiple consumers or generators. This model ensures precise and reliable monitoring even under extreme loads, where lower-amperage shunts (e.g., 100A or 200A) would be insufficient and risk damage or inaccurate readings.

Yes, this shunt is ideal for monitoring consumption, production, and battery state of charge. The voltage signal it generates is interpreted by a battery monitor or energy management system to provide accurate data on current flow.

This ammeter shunt is manufactured by the BEP brand.

The reference number (SKU) for this product is LB-450-50.

Yes, the BEP 450A 50mV shunt ammeter is a fundamental component designed for measuring current in marine electrical installations.

To ensure interference-free signal transmission and optimal accuracy, installing this shunt requires the use of shielded twisted-pair cable.

The minimum recommended cable size for the signal cable to be used with this shunt is 0.25 mm².

Using a shielded twisted-pair cable is crucial for maintaining the integrity of the 50mV signal. This type of cable helps prevent electromagnetic interference, ensuring accurate and reliable measurements even over potentially long distances or in noisy electromagnetic environments.

The shunt must be installed in series with the circuit whose current you wish to measure. It is usually placed on the main current path between the battery and the load or source, or between the battery bank and the energy management system to monitor total current.

Installing this shunt requires a basic understanding of electrical principles. It is essential to follow the manufacturer’s instructions and use the specified cable type to ensure the system’s accuracy and reliability. For correct and safe installation, it is often recommended to have it performed by a qualified professional.

Yes, when installing in a marine environment, it is essential to ensure that all connections are securely fastened and protected against moisture, corrosion, and vibrations. This ensures the longevity and reliability of the shunt and the entire measurement system under harsh conditions.

The product information does not specify whether connection cables are included. A separately purchased shielded twisted-pair cable with a minimum cross-section of 0.25 mm² is typically required for installation.

Yes, this shunt is ideally designed for use with battery monitoring systems and complex energy managers, such as those in the BEP CZone range.

This shunt can operate with any battery monitor or energy management system capable of interpreting a standardized 50 mV input signal at full load. The 50 mV signal is an industry standard for this type of measurement.

Yes, a shunt measures current and its specification (450A/50mV) is independent of the system voltage (whether it is 12V, 24V or another), as long as the current flowing through the shunt does not exceed 450 amperes. It is therefore compatible with 12V and 24V systems.

A shunt is a passive component. It does not require an external power supply to operate. Its function is to create a voltage drop proportional to the current flowing through it, which is then measured by an external device.

Yes, as long as the battery monitor or energy management system from another brand is designed to accept a 50mV input signal at full load, this shunt can be used. The 50mV signal is a common standard in the industry for shunts.

The shunt itself is a purely hardware component that generates an analog signal. Any necessary software configuration would be done at the battery monitor or energy management system to which the shunt is connected, to correctly interpret the 50mV signal.