Rozvaděč Contura 8 pozic

This is an electrical distribution panel designed specifically for marine environments. It can protect and distribute power to eight separate DC circuits and is equipped with Contura switches featuring integrated push-button circuit breakers.

The main function of this panel is to ensure power distribution, circuit protection (wires), activation/deactivation of circuits, and status indication (live circuit) for eight separate circuits aboard a vessel.

This panel is designed to manage up to eight separate circuits, each protected by its own push-button circuit breaker.

The panel is supplied with 15-amp push-button circuit breakers by default. These breakers are integrated into the Contura switches and are suitable for most marine circuit protection applications.

The panel is made from a 5052-H32 aluminum alloy with a thickness of 2.5 mm (0.100"). It is chemically treated to MIL-SPEC C-5541 standards for enhanced corrosion resistance, then coated with a two-part polyurethane textured finish.

Yes, the panel is supplied with a set of 60 base labels to clearly identify each circuit in the recessed area provided for this purpose on the front face of the panel.

Yes, the panel is designed to withstand water exposure typically encountered in deck-mounted applications, including salt spray, rain, hose-downs, and brief immersions. It has an IP66 protection rating.

Yes, this panel is certified to ISO 8846 and UL 1500, and is ignition-protected, making it suitable and safe for installation on boats equipped with gasoline engines.

This panel is compatible with marine electrical systems operating at 12 Volts DC or 24 Volts DC.

Each Contura switch integrates a push-button circuit breaker capable of handling a maximum of 20 amperes for 12 Volt systems and a maximum of 15 amperes for 24 Volt systems.

Yes, the supplied 15 amp circuit breakers can be removed and replaced with higher-rated breakers if required, up to a maximum of 20 amps for 12V systems and 15 amps for 24V systems per breaker.

For correct installation, the cutout in the mounting surface must be 218.95 mm (8.620") in length and 108.46 mm (4.270") in width. The mounting centers for the screws are 216.90 mm (8-17/32") by 86.90 mm (3-13/32").

To ensure waterproofing, once the cutout is made, the mounting surface must be clean and free of debris. The provided sealing gasket (seal) must be placed between the panel and the mounting surface, then the panel must be firmly screwed in using the supplied screws.

Before any installation, it is imperative to disconnect the main positive cable from all batteries to prevent any risk of short-circuit. It is also recommended to unplug the AC power cord of the boat if applicable.