Deckhand Dimmer - 24V DC 12A - Deckhand Dimmer - 24V DC 12A

Deckhand Dimmer - 24V DC 12A - Dimensioned Drawing

Point relais offert dès 150€ en France
Retrait chez Skysat possible

Installation sur mesure

Faites confiance à Skysat pour installer l'équipement à bord

Demander un devis

Installateurs autour de vous

grâce à notre réseau d'installateurs agréés

Trouvez un installateur

Service d'assistance

Optez pour une aide complémentaire à la pose

Ušetříte 13%

Blue Sea Systems

7509-BSS

Řadič Deckhand – 24 V DC 12 A

Q: What is the main function of the Deckhand 7509 variable speed drive?

The BLUE SEA Deckhand 7509 dimmer is designed to digitally control the brightness of unregulated LEDs, incandescent and halogen bulbs in 24 V DC marine systems. It provides precise lighting management on board.

Q: Which types of lights can be controlled by this dimmer?

This dimmer can control the light intensity of:Unregulated LEDsIncandescent bulbsHalogen bulbs

Q: What is the nominal voltage required for the Deckhand 7509 drive?

The Deckhand 7509 drive requires a nominal voltage of 24 V DC (direct current) to operate correctly.

Q: What is the supported operating voltage range for this variable speed drive?

The Deckhand 7509 drive can operate within a voltage range from 18 V to 32 V DC.

Q: What is the maximum output current that the drive can handle?

The maximum output current that the Deckhand 7509 drive can handle is 12 A.

Q: How does the "bulb saver" function protect bulbs?

The "bulb saver" function built into the Deckhand 7509 dimmer prevents premature aging of bulbs when the boat's batteries are being charged. This helps extend the lifespan of your bulbs.

Q: How does the overcurrent protection of the autopilot work?

The Deckhand 7509 drive has built-in overcurrent protection. If the unit stops working due to an overcurrent, simply correct the excessive load, then hold the drive's switch pressed until the circuit flashes to reset it.

Q: What temperature range can the Deckhand 7509 drive operate in?

The Deckhand 7509 drive is designed to operate within a wide temperature range, from −40°C to 85°C.

Q: What type of control technology is used for intensity variation?

The Deckhand 7509 dimmer uses Pulse Width Modulation (PWM) for light intensity control.

Q: Does the dimmer store the last lighting intensity setting?

Yes, the Deckhand 7509 dimmer has memory that stores the last light intensity setting used.

Le variateur BLUE SEA Deckhand 7509 est un contrôleur numérique d'éclairage 24 V CC de 12 A, optimisé pour les LED non régulées, halogènes et incandescentes. Il se positionne comme une solution polyvalente dans la gamme Deckhand, avec une sortie temporisée et une protection intégrée contre les surintensités. Un interrupteur momentané (ON)-OFF-(ON) est inclus.

Napětí: 24 V

12 V 24 V

Proud: 12 A

6 A 12 A

Prix publicBénéficier du tarif pro

3.050,94 CZK

3.050,94 CZK ~~3.524,67 CZK~~

s DPH Doprava se vypočítá při platbě.

Skladem

Point relais offert dès 150€ en France
Retrait chez Skysat possible

Installation sur mesure

Faites confiance à Skysat pour installer l'équipement à bord

Demander un devis

Installateurs autour de vous

grâce à notre réseau d'installateurs agréés

Trouvez un installateur

Service d'assistance

Optez pour une aide complémentaire à la pose

Caractéristiques techniques

Typ řídicího rozhraní	Interrupteur momentané (ON)-OFF-(ON)
Typ řízení	Modulation de largeur d'impulsion (PWM)
Kompatibilní osvětlovací systémy	LED non régulées, incandescentes, halogènes
Zone Control	Non
Rozsah provozního napětí	18 à 32
Typická spotřeba elektrické energie	< 0.05
Typ instalace	Montage en surface
Rozměry produktu	82.55 x 88.9 x 50.8
Kompatibilní s stmíváním	Oui
Obsah balení	Variateur Deckhand, interrupteur momentané (ON)-OFF-(ON)
Certifikace	E-marked, ISO 8846, SAE J1171, SAE J1455, SAE J1113
Dimmer Memory Function	Oui
Ignition Protection Standard	ISO 8846, SAE J1171
Illuminated Exit Delay Max Minutes	5
Maximum Output Current	12
Maximum Parasitic Current	<2
Jmenovité napětí	24
Operating Temperature Range C	-40 à 85
Overcurrent Protection	Oui
Reset Mechanism Type	Manuel (maintenir l'interrupteur enfoncé)

Accessoires

Bloc de fusibles SafetyHub 100 - SafetyHub 100 Fuse Block

Sada pojistek SafetyHub 100

3.269,66 CZK

3.269,66 CZK ~~4.426,45 CZK~~

Koupit

Bloc de fusibles SafetyHub 150 - SafetyHub 150 Fuse Block

Požární blok jističů SafetyHub 150

3.443,70 CZK

3.443,70 CZK ~~4.444,72 CZK~~

Koupit

Bloc de fusibles à lame ST - 6 circuits avec bus négatif et couvercle - ST Blade Fuse Block - 6 Circuits with Negative Bus and Cover

Jističová skříň ST Blade - 6 okruhů s negativní sběrnicí a krytem

1.148,89 CZK

1.148,89 CZK ~~1.583,11 CZK~~

Koupit

Bus Bar commun 150 A - 20 bornes avec couvercle - Common 150A BusBar - 20 Gang with Cover

Sběrnicová sběrnice 150 A - 20 pólů s krytem

1.018,54 CZK

Koupit

MaxiBus 250A avec capot - six goujons 5/16"-18 - MaxiBus 250A BusBar - Six 5/16

MaxiBus 250A s kapotou - šest svorníků 5/16"-18

2.028,20 CZK

Koupit

Bornier 30A 10 circuits - Terminal Block 30A - 10 Circuit

Spojovací svorka 30A 10 okruhů

330,05 CZK

Koupit

Těsnění CableClam 0,68""

572,72 CZK

572,72 CZK ~~667,51 CZK~~

Koupit

CableClam with Stainless Steel Dress Cap 0.68" - CableClam with Stainless Steel Dress Cap 0.68

Těsnicí průchodka CableClam s ukončovacím krytem z nerezové oceli 0,68"

799,33 CZK

799,33 CZK ~~924,49 CZK~~

Koupit

Adaptér spínače řady Rocker

105,16 CZK

105,16 CZK ~~127,13 CZK~~

Koupit

Description détaillée

Určený pro 24 V DC systémy na moři, řadič Deckhand 7509 od firmy BLUE SEA představuje digitální řešení pro ovládání osvětlení. Umožňuje přesné řízení intenzity světla pro neregulované LED, žárovky a halogenové žárovky. Řadič disponuje funkcí osvětleného výstupu se zpožděním nastavitelným od 1 do 5 minut, což zvyšuje bezpečnost při opouštění lodi.

Technické vlastnosti a funkce

Deckhand 7509 má paměť pro poslední nastavení intenzity a podporuje více spínacích míst. Funkce „bulb saver“ chrání žárovky před předčasným stárnutím při nabíjení baterií lodi. Posunuté montážní patky optimalizují instalaci umožňující montáž více řadičů v těsné blízkosti. Obsahuje okamžitý spínač (ON)-OFF-(ON) pro okamžité použití. Má vestavěnou ochranu proti přetížení, kterou lze resetovat jednoduchým přepnutím spínače.

Integrace a shoda

Při jmenovitém napětí 24 V DC a provozním rozsahu 18 V až 32 V tento řadič zvládá maximální výstupní proud 12 A s parazitním proudem nižším než 2 mA. Pracuje v širokém teplotním rozsahu od −40°C do 85°C a využívá řízení pomocí pulzně šířkové modulace (PWM). Řadič Deckhand 7509 splňuje regulační normy E-marked, ISO 8846 a SAE J1171 pro ochranu proti vnějšímu vznícení, stejně jako normy SAE J1455 a SAE J1113. V rámci řady Deckhand od firmy BLUE SEA představuje model 7509 24 V DC řadič o 12 A, který nabízí vyšší kapacitu řízení zátěže než model 7504 (6 A při 24 V DC) a liší se od 12 V DC verzí, jako jsou 7507 (12 A) nebo 7508 (25 A).

Documentations

Type	Nom
	EN - Instructions - Deckhand Dimmer - 24V DC 12A
	EN - Deckhand Dimmer - Deckhand Dimmer - 24V DC 12A

Paiement et sécurité

Vos informations de paiement et données sont traitées de manière sécurisée.

Řadič Deckhand – 24 V DC 12 A

3.050,94 CZK

3.050,94 CZK ~~3.524,67 CZK~~

Complétez votre installation avec des

Équipements complémentaires

Blue Sea Systems

Ampérmetr M2 DC

Ref : 1832-BSS

10.444,65 CZK

10.444,65 CZK ~~11.601,44 CZK~~

Mini ampèremètre OLED- Max 100A - Mini OLED Ammeter - Yellow

Blue Sea Systems

Mini ampérmetr OLED – max. 100 A

Ref : 1732B-BSS

2.386,64 CZK

2.386,64 CZK ~~2.907,77 CZK~~

Mini OLED DC Voltmeter - Yellow - Mini OLED DC Voltmeter - Yellow

Blue Sea Systems

Mini voltmetr stejnosměrného napětí OLED - žlutý

Ref : 1733-BSS

1.318,48 CZK

1.318,48 CZK ~~1.604,10 CZK~~

M2 DC Multimeter with SoC - M2 DC Multimeter with SoC

Blue Sea Systems

Multimetr M2 DC s SoC

Ref : 1830-BSS

10.163,23 CZK

10.163,23 CZK ~~12.181,56 CZK~~

Coupe-batterie à distance ML-RBS avec commande manuelle - 24V DC 500A - ML-RBS Remote Battery Switch with Manual Control - 24V DC 500A

Coupe-batterie à distance ML-RBS avec commande manuelle - 24V DC 500A - Wiring Diagram

Blue Sea Systems

Dálkově ovládaný bateriový odpojovač ML-RBS s ručním ovládáním - 24 V DC 500 A

Ref : 7702B-BSS

5.931,56 CZK

5.931,56 CZK ~~7.404,82 CZK~~

Sélecteur de batterie e-Series 4 positions - Mounting Diagram

Blue Sea Systems

Výběrovač baterií e-Series 4 polohy

Ref : 9001EB-BSS

1.575,96 CZK

1.575,96 CZK ~~1.762,33 CZK~~

e-Series Selector 3 Position Battery Switch with AFD - e-Series Selector 3 Position Battery Switch with AFD

e-Series Selector 3 Position Battery Switch with AFD - Dimensioned Drawing

Blue Sea Systems

Vypínač baterie BLUE SEA e-Series 3-polohový se zařízením AFD

Ref : 11001-BSS

1.798,13 CZK

1.798,13 CZK ~~1.999,81 CZK~~

12/24V DC Dual USB Charger 4.8A with Intelligent Device Recognition - 12/24V DC Dual USB Charger 4.8A with Intelligent Device Recognition

Blue Sea Systems

Dvojité USB nabíječka 12/24 V DC 4,8 A s inteligentním rozpoznáváním zařízení

Ref : 1045-BSS

1.250,10 CZK

1.250,10 CZK ~~1.471,04 CZK~~

Panneau de disjoncteur étanche WeatherDeck® 12V DC - Gris 8 positions - WeatherDeck® 12V DC Waterproof Circuit Breaker Panel - Gray 8 Positions

Blue Sea Systems

Jističová rozvodná deska WeatherDeck® 12 V DC – šedá, 8 pozic

Ref : 4378-BSS

5.447,71 CZK

5.447,71 CZK ~~6.427,99 CZK~~

Questions fréquentes

Besoin d'aide ? Contactez-nous

What is the main function of the Deckhand 7509 variable speed drive?

The BLUE SEA Deckhand 7509 dimmer is designed to digitally control the brightness of unregulated LEDs, incandescent and halogen bulbs in 24 V DC marine systems. It provides precise lighting management on board.

Which types of lights can be controlled by this dimmer?

This dimmer can control the light intensity of:

Unregulated LEDsIncandescent bulbsHalogen bulbs

What is the nominal voltage required for the Deckhand 7509 drive?

The Deckhand 7509 drive requires a nominal voltage of 24 V DC (direct current) to operate correctly.

What is the supported operating voltage range for this variable speed drive?

The Deckhand 7509 drive can operate within a voltage range from 18 V to 32 V DC.

What is the maximum output current that the drive can handle?

The maximum output current that the Deckhand 7509 drive can handle is 12 A.

How does the "bulb saver" function protect bulbs?

The "bulb saver" function built into the Deckhand 7509 dimmer prevents premature aging of bulbs when the boat's batteries are being charged. This helps extend the lifespan of your bulbs.

How does the overcurrent protection of the autopilot work?

The Deckhand 7509 drive has built-in overcurrent protection. If the unit stops working due to an overcurrent, simply correct the excessive load, then hold the drive's switch pressed until the circuit flashes to reset it.

What temperature range can the Deckhand 7509 drive operate in?

The Deckhand 7509 drive is designed to operate within a wide temperature range, from −40°C to 85°C.

What type of control technology is used for intensity variation?

The Deckhand 7509 dimmer uses Pulse Width Modulation (PWM) for light intensity control.

Does the dimmer store the last lighting intensity setting?

Yes, the Deckhand 7509 dimmer has memory that stores the last light intensity setting used.

What is the standby current consumption of the autopilot drive (parasitic current)?

The maximum parasitic current of the Deckhand 7509 drive is less than 2 mA, indicating very low power consumption in standby mode.

How can I enable and adjust the backlight output mode?

To activate the illuminated output mode and set the delay:

1-minute delay: Hold the switch in the high (illuminated) position for 2 seconds. The lights will flash. Release the switch after the first flash, and the lights will remain on for 1 minute. 2 to 5-minute delay: Hold the switch in the high (illuminated) position for 1 to 4 seconds after the first flash. Release the switch after 2 to 5 flashes. The lights will remain on for 1 minute per flash, up to a maximum of 5 minutes.

Is a switch provided with the Deckhand 7509 dimmer?

Yes, the Deckhand 7509 autopilot drive is supplied with a momentary (ON)-OFF-(ON) switch.

Do offset mounting brackets provide a specific advantage during installation?

Yes, the offset mounting feet of the Deckhand 7509 autopilot are designed to allow multiple autopilots to be mounted close to each other, optimizing installation space.

What should I do if the drive stops working due to an overcurrent?

If the autopilot stops working due to an overload, you must first correct the excessive load. Then, hold the autopilot’s switch pressed until the circuit flashes to reset the built-in protection.

Is it possible to control the inverter from multiple locations on the boat?

Yes, the Deckhand 7509 autopilot supports multiple switch locations, allowing it to be controlled from different points on your boat.

Is the Deckhand 7509 variator suitable for 12V DC electrical systems?

No, the Deckhand 7509 drive is specifically designed for 24 V DC marine electrical systems and operates within a range of 18 V to 32 V. It is not compatible with 12 V DC systems.

Can this dimmer be used with regulated LEDs?

No, the Deckhand 7509 dimmer is designed to digitally control the intensity of unregulated LEDs, as well as incandescent and halogen bulbs.

Which safety and compliance standards does this product meet?

The Deckhand 7509 inverter complies with several regulatory standards, including:

E-markedISO 8846 (external ignition protection)SAE J1171 (external ignition protection)SAE J1455SAE J1113

Is the Deckhand 7509 variable frequency drive certified for external ignition protection?

Yes, the Deckhand 7509 variable frequency drive (VFD) meets the external ignition protection requirements of ISO 8846 and SAE J1171 standards, ensuring safety in marine environments.