Ponorné čerpadlo lodi 14000 l/h 24 V

The RULE RL016 pump delivers a maximum flow rate of 14000 L/h (3700 GPH) at 0 meters discharge head. Performance remains strong, delivering 10977 L/h at 1 meter and 9274 L/h at 2 meters.

This RULE RL016 bilge pump requires a 24V DC power supply to operate correctly.

Yes, the RULE RL016 pump is fully submersible, making it suitable for demanding marine environments.

The current draw of this pump is 6.9 A at 24V DC, with a maximum of 10 A at 27.2V.

No, this RULE RL016 pump model does not include an integrated non-return valve. Backflow prevention is typically featured on RULE models from 360 to 1100 GPH.

The pump includes a thermal cut-out (TCO) to protect the pump and the vessel's electrical circuit in case of overheating.

The pump is built with stainless steel shafts and marine-grade waterproof wiring, providing effective protection against rust and corrosion.

Yes, the motor of this pump is optimized and capable of running dry for short periods without sustaining damage.

This pump is designed for use only with fresh water and salt water. It must not be used with hazardous, corrosive or flammable materials.

No, the RULE RL016 pump is designed for quiet operation with minimal vibrations, improving onboard comfort.

The pump is fitted with a removable strainer base (snap-lock) that greatly simplifies cleaning of the strainer and the turbine cavity.

The RULE RL016 pump meets or exceeds CE and ISO 8849 standards (electric bilge pumps), as well as ISO 10133 (low-voltage electrical systems).

A 15 A fuse is required to ensure optimal protection for the pump and the vessel's electrical circuit.

It is crucial to keep all electrical connections above the highest waterline to prevent corrosion and ensure safety.

Wires must be connected using butt connectors and marine-grade sealant to prevent conductor corrosion and ensure a durable connection.

Yes, the turbine casing is specifically ventilated to prevent the formation of air pockets, which is essential for complex plumbing installations and efficient operation.

No, the RULE RL016 pump is specifically designed to operate on a 24V DC power supply. It is not compatible with 12V systems.

No, this pump is strictly designed for fresh water and salt water. Use with hazardous, corrosive or flammable materials is prohibited as it may cause pump damage, environmental harm and personal injury.

With its high flow rate of 14000 L/h, this pump is ideal for vessels requiring rapid and efficient evacuation of large volumes of water, thereby ensuring enhanced safety at sea.

Yes, the RULE RL016 pump is designed with an ignition protection system, enhancing safety aboard your vessel.