Průchodka vodorovná pro kabely o průměru 6 až 10 mm

The Scanstrut DS-H10 cable gland is a watertight stuffing box designed to safely and securely pass cables through a horizontal surface on your boat, such as a deck or coachroof. It is part of the Seal / Horizontal range from Scanstrut.

The DS-H10 cable gland measures 77.50 mm in length, 44.50 mm in width, and has an overall height of 27 mm once installed. Its low profile ensures discreet integration.

Yes, the Scanstrut DS-H10 cable gland is a product specifically designed for marine environments. It is built to withstand humid conditions and ensure reliable sealing, even in the most demanding situations.

Once installed on a surface, the Scanstrut DS-H10 horizontal cable gland has a low profile with an overall height of just 27 mm.

The DS-H10 cable gland kit includes the following components:

A shell (Shell)A base (Base)A gasket (Gasket)An M5x10 boltFour No. 6x16 self-tapping screwsSix bungs of different diameters (6mm, 7mm, 8mm, 9mm, 10mm)

For the installation of the DS-H10 cable gland, a 25 mm diameter hole is required. This hole allows the cable to pass through the mounting surface.

To install the DS-H10 cable gland, you will need the following tools:

A Pozidriv screwdriver A silicone sealant (for waterproofing) A 2.5 mm (3/32”) drill bit A 3 mm (1/8”) drill bit A 25 mm (1”) hole saw or drill bit

You must select the plug whose diameter is closest to that of your cable. The kit includes plugs for diameters of 6, 7, 8, 9 and 10 mm, allowing you to find the most precise fit.

Yes, Scanstrut recommends freezing the plug before drilling it. This trick can help achieve a cleaner and easier hole in the plug material.

The cable gland is securely fastened to the mounting surface using four No. 6x16 self-tapping screws and one M5x10 bolt, all included in the kit.

No, the DS-H10 model is specifically designed as a horizontal cable gland, optimized for flat installation. For installations requiring cable passage through a vertical surface, Scanstrut offers other models in the Seal range, such as the DS-V10.

This cable gland can be installed on any type of horizontal surface on your boat, including the deck, roof, or gunwale, provided the surface is flat and allows for the necessary drilling.

Yes, the DS-H10 cable gland is compatible with all standard marine cable types, including power, data, and antenna cables, provided their diameter is between 6 and 10 mm.

The supplied gasket is an essential component. Its function is to ensure a perfect seal between the cable gland base and the mounting surface, thereby preventing water from infiltrating inside your boat.

Yes, the DS-H10 cable gland is designed for simplified installation. The provided instructions are clear, and the required tools are common, making installation accessible even for a non-professional.

The horizontal cable gland (such as the DS-H10) is optimized for flush mounting on a horizontal surface, providing a low profile. Vertical cable glands, on the other hand, are designed for passing through vertical surfaces or for cables requiring an upward exit.

No, the DS-H10 cable gland is specifically designed for cables with a diameter between 6 and 10 mm. For thinner cables, for example 4 to 6 mm, Scanstrut offers other more suitable models, such as the DS-H6.