Dvojitá zásuvka USB-A / USB-C Flip Pro Plus

This Scanstrut Flip Pro Plus dual USB socket lets you charge a wide range of navigation and leisure electronics. With its USB-A and USB-C ports, you can recharge smartphones, tablets, handheld GPS units, cameras, e-readers or any other USB-chargeable device. High power output ensures fast charging, even for the latest devices.

Yes, the Scanstrut Flip Pro Plus mount is compatible with Apple devices. The USB-C port is ideal for charging newer iPhones and iPads (from iPhone 15 onwards and USB-C iPad Pro models), while the USB-A port suits older models or other accessories. The high charging power enables fast and efficient charging of your Apple devices.

Yes, the Scanstrut Flip Pro Plus dual USB socket is fully compatible with Android devices. Whether you have a smartphone, tablet, or another gadget using a USB-C or USB-A connection, you can charge it without issues. The high-power output is particularly suited to recent Android devices that support fast charging.

Installing the Scanstrut Flip Pro Plus socket is designed to be simple and professional. This is a flush-mount socket, meaning you need to cut a mounting hole in the control panel, console, or transom of your boat. The exact drilling diameter is usually provided in the product installation manual. After drilling the hole, simply connect the power wires (typically 12V or 24V) and secure the socket using the supplied locking nut. Ensure the wiring complies with marine electrical standards.

To install the Scanstrut Flip Pro Plus dual USB socket, you will need basic marine electrical tools. Have a drill with a hole saw or a punch tool matching the mounting diameter, a screwdriver to tighten electrical connections, wire strippers to prepare the cables, and optionally a multimeter to check polarity and voltage. Also ensure you have marine-grade electrical cable of the appropriate cross-section (typically 1.5 mm² or 2.5 mm²) and waterproof connectors.

Yes, the Scanstrut Flip Pro Plus socket can be installed on various surfaces, including wood, fiberglass, acrylic, or metal. The flush-mount installation method is suitable for most boat panel materials. It is important to choose a location that is accessible and protected from direct water spray when the flap is open. For fiberglass surfaces, ensure you use a suitable hole saw to prevent the material from cracking.

Based on available information, the Scanstrut Flip Pro Plus socket is a flush-mounted component that typically does not include a pre-attached power cable. It is designed to be wired directly to your boat's 12V or 24V electrical circuit. You will need to provide your own marine-grade electrical cable for the connection. The product is supplied with the necessary connectors for wiring.

The Scanstrut Flip Pro Plus dual USB socket is designed to operate on a standard boat electrical supply, typically 12V or 24V DC. This is the typical voltage for onboard electrical systems on pleasure craft. Ensure the socket is connected to a circuit protected by an appropriate fuse, in accordance with the manufacturer's recommendations.

Yes, the Scanstrut Flip Pro Plus socket is compatible with 24V electrical systems, which is common on larger boats or certain sailboats. The integrated USB charger is designed to accept an input voltage range that covers both 12V and 24V. However, check the exact specifications in the product manual to ensure compatibility with your installation.

Yes, the Scanstrut Flip Pro Plus dual USB port is designed to allow simultaneous charging of two devices. It features one USB-A port and one USB-C port, enabling you to plug in two devices at the same time. The output power is distributed between the two ports to optimize charging, but remains high enough to recharge your equipment quickly.

The Scanstrut Flip Pro Plus dual USB socket is marketed as a high-power solution for fast charging. It likely supports fast-charging protocols such as Power Delivery (PD) on the USB-C port and possibly Quick Charge (QC) on the USB-A port, but this is not explicitly confirmed in the provided data. For certainty, we recommend consulting Scanstrut’s detailed technical specifications.

Yes, the Scanstrut Flip Pro Plus dual USB socket is generally supplied with an installation manual provided by the manufacturer. This manual includes assembly instructions, wiring diagrams, cut-out dimensions, and safety recommendations. If you cannot find the manual in the packaging, you can usually download it from the Scanstrut official website or contact us to obtain a digital copy.

Yes, you can absolutely use the Scanstrut Flip Pro Plus dual USB socket to charge an external battery (power bank). Simply plug your power bank’s cable into one of the USB ports (A or C) on the socket. The high charging power will efficiently recharge your external battery, which is handy for having an extra power reserve during your sailing trips.