Sonar reálného času ActiveTarget 2

The ActiveTarget® 2 complete kit includes the ActiveTarget® 2 module, the ActiveTarget® 2 transducer with a 7.62-meter (25-foot) cable, an electric motor shaft mount, an Ethernet cable, and a power cable.

The ActiveTarget 2 sonar provides real-time underwater imaging with high resolution. It allows clear visualization of fish, structures, and your lure. It offers multiple view modes: forward (Forward View), down (Down View), and Scout for an ultra-wide perspective.

The ActiveTarget 2 offers three main display modes:

Forward View: Displays what is ahead of the boat.
Down View: Reveals the area directly beneath the vessel.
Scout View: Provides an ultra-wide perspective to locate fish schools and distant structures.

The ActiveTarget 2 transducer comes with a 7.62 m (25 ft) cable.

The maximum current consumption of the ActiveTarget 2 module is 1.5 A at 13.8 V. It is recommended to use a 5 A fuse for its protection.

Yes, the entire ActiveTarget 2 system, including the sounder module and transducer, is rated IP67. This means it is protected against temporary immersion in water.

The ActiveTarget 2 fishfinder module weighs 1.86 kg (4.12 lbs) and the transducer weighs 1.21 kg (2.67 lbs).

Operating temperature of the fishfinder module: From -15 °C to 55 °C (5 °F to 131 °F).Water temperature for transducer operation: From 0 °C to 35 °C (32 °F to 95 °F).Storage temperature (module and transducer): From -30 °C to 70 °C (-22 °F to 158 °F).

Yes, the ActiveTarget 2 depth sounder module is equipped with reverse polarity protection to prevent damage in case of incorrect power connection.

The ActiveTarget 2 system operates on a 12/24 V DC power supply, with an operating voltage range from 10.8 V DC to 31.2 V DC.

When installing cables, avoid sharp bends. It is recommended to include service loops to protect the cables and facilitate maintenance.

Yes, it is possible to install two ActiveTarget 2 systems (two sounder modules and two transducers) on your boat to get dual views. The modules are synchronized via the blue wire of the power cable and operate without interference.

To achieve a 270-degree panoramic view, you must use two ActiveTarget 2 transducers and a dedicated Scout Wide mount, typically installed on a Ghost electric motor, in conjunction with a compatible HDS PRO display.

The ActiveTarget 2 kit includes a mount for the front electric motor shaft. Other mounting options, such as the transom mount, are available separately.

In a dual-sounder system, the sounder modules are synchronized using the blue wire in the power cable, allowing them to operate simultaneously without interference.

The ActiveTarget 2 system is compatible with Lowrance HDS LIVE, Elite FS, and HDS PRO multifunction displays. The HDS PRO display is specifically noted for synchronized dual-view capabilities.

The ActiveTarget 2 module connects to the multifunction display via an Ethernet cable to transmit sonar data in real time.

Yes, with a compatible multifunction display such as the HDS PRO, and by installing two ActiveTarget 2 systems (two modules and two transducers), you can display two sonar images simultaneously, for example the forward and Scout views.

The ActiveTarget 2 module uses an Ethernet connection to transmit sonar data in real time to a compatible multifunction display. It does not include an NMEA 2000 port for its sonar function.