Sondeur HDS-9 PRO bez sondy

The HDS-9 PRO fishfinder is equipped with a 9-inch screen with a resolution of 1280 x 720 pixels. It features a multi-touch touchscreen.

Yes, the HDS-9 PRO display is designed for excellent readability even in full sunlight. It features a brightness exceeding 1200 nits and wide viewing angles of 80° in all directions (up, down, left, right).

No, this version of the Lowrance HDS-9 PRO, with part number 000-15997-001, is sold without a transducer. This allows you to select the transducer best suited to your fishing type and existing installation.

The HDS-9 PRO is compatible with a wide range of fishfinder technologies, including:

CHIRP low, medium, and high frequency sounders up to 1 kW.DownScan (455/800 kHz or CHIRP 700/1200 kHz).SideScan (455/800 kHz or CHIRP 455/1075 kHz).Real-time fishfinder systems such as Lowrance ActiveTarget.

The HDS-9 PRO requires a 12 V DC power supply. The accepted voltage range is 10.8 V to 18 V DC.

It is recommended to use a 3 A fuse on the positive power line to protect the device.

The device has two dedicated sonar ports (9-pin connectors), allowing connection of multiple transducers or advanced sounder modules.

Yes, the HDS-9 PRO is equipped with an NMEA 2000 port (Micro-C connector) to connect to your boat's network and share data with other compatible devices (engine, sensors, etc.).

The HDS-9 PRO fishfinder has an IPX6 and IPX7 waterproof rating, protecting it against powerful water jets and temporary immersion.

Yes, the HDS-9 PRO is equipped with two Ethernet ports that allow it to be connected to other multifunction displays, fishfinder modules, radars, and other compatible peripherals to share information and functionalities.

Yes, it is possible to connect an analog video source. The device has a video input port via the power cable. Note that an adapter cable, sold separately, is required for this connection.

The maximum power consumption of the HDS-9 PRO is 40 W, which corresponds to a current of 2.9 A at a voltage of 13.8 V DC.

The HDS-9 PRO is designed to operate within a temperature range of -15°C to 55°C (5°F to 131°F).

Yes, the HDS-9 PRO features a hybrid interface. It has a multi-touch touchscreen for intuitive use and a full physical keypad for precise and reliable control, even in rough seas or when wearing gloves.

The weight of the HDS-9 PRO display alone is 1.39 kg (3.06 lb).

Yes, you can connect a compatible Lowrance radar directly to one of the two Ethernet ports on the HDS-9 PRO to display radar data on the screen.

The HDS-9 PRO is compatible with major marine cartography systems, including C-MAP (DISCOVER, REVEAL) charts and Navionics charts. You can use charts stored on a microSD card.

To create an emergency MOB (Man Overboard) waypoint, simply press the Zoom in (+) and Zoom out (-) buttons simultaneously on the device.

Yes, the HDS-9 PRO is equipped with a 9-inch multi-touch display offering excellent readability in full sunlight thanks to its high brightness exceeding 1200 nits.

It features a resolution of 1280 x 720 pixels and wide viewing angles (80° in all directions), making it easy to view navigation and fishing data from any position on the boat.

This model is sold without a transducer, giving you great flexibility to build your own sonar network. It includes two 1 kW sonar ports and supports:

Traditional CHIRP fishfinder (low, medium and high frequency).High-resolution imaging technologies SideScan and DownScan.Advanced real-time detection systems such as Lowrance ActiveTarget and Garmin Ghost 360.

The HDS-9 PRO fishfinder operates on a 12 V DC electrical system (accepted voltage range: 10.8 to 18 V DC). Its maximum power consumption is 40 W (approximately 2.9 A at 13.8 V DC).

To ensure a secure installation and protect your device, it is recommended to install a 3 A fuse or equivalent circuit breaker on the positive power line.