Tiny tri 2MN – bílý 360° kotvový reflektor (hlava stěžně)

This anchor light provides a luminous range of 2 nautical miles (2NM), making it suitable for vessels under 12 meters in accordance with maritime regulations.

The MANTAGUA Tiny tri 2MN light is specifically designed for vessels under 12 meters (39 feet).

This anchor light has a very low power consumption of 1.8 watts, which helps preserve your boat's battery autonomy.

Yes, this light is fully waterproof with an IP67 protection rating. It is also epoxy-sealed, making it resistant to vibrations and water ingress, ensuring a long service life in marine environments.

The light has a height of 30 mm (without the base) and a diameter of 40 mm. With its base, the total height is 72 mm. Its weight is 45 grams (light only) and 60 grams with the mounting bracket.

This is a white anchor light with 360° light diffusion, ensuring full visibility around your vessel.

This anchor light operates on 12 Volts DC power.

The light comes with 15 meters of cable, making masthead installation easier.

The light is supplied with a mounting bracket that can be bent into an "L" or "U" shape depending on your mast configuration. You may also choose to glue the light directly to the masthead if desired, while respecting its orientation.

Yes, stainless steel screws with a 4 mm diameter are included for securing the light to the mast.

When mounting the light on the mast, you must orient the boat symbol at the top of the light toward the bow of your vessel.

A minimum cable cross-section of 0.5 mm² is recommended for connecting 12V DC power wires.

No, the light should be manually assembled on its bracket without using an electric drill to avoid damaging the components.

The MANTAGUA Tiny tri 2MN light offers a luminous intensity greater than 5.4 candela.

This anchor light is designed to operate within a temperature range from -20°C to 50°C.

Yes, the MANTAGUA Tiny tri 2MN anchor light is polarized, which is an important technical feature for its proper operation.

Yes, if you wish, you can choose not to use the stainless steel bracket and glue the light directly to the masthead, provided you maintain its orientation toward the bow of the boat.

The primary function of this light is to signal your vessel at anchor, providing 360° visibility for other ships to ensure your safety.

The "Tiny" range is valued for its compact and lightweight design, which is an advantage for racers and small sailboats where topmast weight is a key performance consideration.