Câbles Ethernet/réseau UTP SLIM CAT6 28AWG rouge 7FT

Free pickup point from €150 in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

thanks to our network of approved installers

Find an installer

Support service

Opt for additional installation assistance

Save 10%

Skysat

MP-64RJ4528GR-007

7FT Red UTP Slim CAT6 28AWG Ethernet/Network Cable

UTP SLIM CAT6 28AWG red Ethernet/network cables 7FT for data or Ethernet connections aboard, suitable for AMPHENOL installations. Length indicated: 7 ft.

Retail priceBenefit from the professional rate

£8.71 GBP

£8.71 GBP ~~£9.72 GBP~~

Shipping calculated at checkout.

Low stock

Free pickup point from €150 in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

thanks to our network of approved installers

Find an installer

Support service

Opt for additional installation assistance

Technical specifications

Connector type	RJ45
Cable segment	Marine data network / Ethernet
Cable type	Cat6 Ethernet cable
Compatibility Scope	Exact reference of the equipment to verify before ordering
Environment	Marine installation
Installation Advice	plan separate routing for high-power cables and avoid tight bends
Installation Check	the connector type, network category, and usable length between equipment
Length	7 ft
Length Ft	7
Network protocol	Ethernet
Product Usage	Ship's network
Skysat Usage	data or Ethernet connection onboard

Detailed description

UTP SLIM CAT6 28AWG red Ethernet/network cable 7FT is an Ethernet cable designed for data or Ethernet linking aboard. It complements an existing installation or replaces a worn cable while maintaining a reference suitable for marine electronics.

This sheet is part of the Marine Data Network/Ethernet family. Length indicated: 7 ft. Connectivity: RJ45. Signal or protocol: Ethernet. Compatibility must be confirmed with the exact AMPHENOL equipment before ordering.

For reliable installation, route the cable separately from high-power lines and avoid tight bend radii. Also check the connector type, network category, and usable length between equipment before closing cable passages.

Documentation

Type	Nom
	MP_64RJ4528GX-2634485 (3).pdf

Expert opinion

Pol CONIN

Digital Manager

« Skysat Review - UTP SLIM CAT6 28AWG Red 7FT Ethernet/Network Cables »

Skysat advice: select this cable based on the equipment to be connected, not just the available length. Check the connector, pinout, and actual routing inside the boat before ordering.

When the cable runs through mast, coachroof, or damp areas, leave a service loop, protect connections, and avoid intermediate splices. This prevents many difficult diagnostics after installation.

Durabilité

Facilité d'installation

Rapport performance / prix

Payment and security

Your payment information and data are processed securely.

7FT Red UTP Slim CAT6 28AWG Ethernet/Network Cable

£8.71 GBP

£8.71 GBP ~~£9.72 GBP~~

Frequently Asked Questions

Need help? Contact us

What is the purpose of the Ethernet/network UTP SLIM CAT6 28AWG red 7FT cable?

Ethernet/network UTP SLIM CAT6 28AWG red 7FT cables are used for the following function: data or Ethernet connections on board. They are designed for installations where you want to maintain a reference suited to the equipment rather than an approximate cable.

Which equipment is it compatible with?

Compatibility depends on the exact reference of the AMPHENOL device. Before ordering, check the connector, pinout, and documentation of the equipment to be connected. Identified cabling: RJ45.

What needs to be checked before installation?

Check the connector type, network category, and the usable length between devices. Also plan the actual cable route, bulkhead passes, and service margins at the ends.

How to install it cleanly on board?

plan a separate routing for high-power cables and avoid tight bends. Connectors must not be under tension, and exposed joints must be protected from moisture.

Does the indicated length always suffice?

The indicated length is 7 ft. Measure the actual passage in the boat before ordering, adding the necessary margin for bends, drops, and service loops.

Why choose an OEM part?

An OEM part reduces the risk of wiring errors, connector mismatches, or signal level issues. This is especially critical for AMPHENOL connections, radar, antenna, marine data bus, or NMEA 2000 links.