Free pickup point from €150 in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

thanks to our network of approved installers

Find an installer

Support service

Opt for additional installation assistance

Save 20%

B&G

000-14396-001

WS300/700 20m Cable

B&G 20-meter mast cable, designed for wired wind sensors in the WS310 and WS700 series. It ensures a robust and reliable connection for accurate wind data transmission to your NMEA 2000 network.

Retail priceBenefit from the professional rate

£87.43 GBP

£87.43 GBP ~~£110.45 GBP~~

Shipping calculated at checkout.

Low stock

Free pickup point from €150 in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

thanks to our network of approved installers

Find an installer

Support service

Opt for additional installation assistance

Technical specifications

Section (mm²)	0.33
Section (AWG)	22.0
Number of conductors	5.0
Color	Black
Max voltage	12.0
Shielding	Shielded
Flexibility	Flexible
Current type	DC
Outer diameter	7.0
Nominal current	1.0
Jacket material	PVC
Conductor material	Tinned Copper
Certifications	CE
Conductor finish	Tinned
Cable type	CAN-bus Cable
Cable length	20.0
Pre-molded connectors	Yes
Wind vane / anemometer compatibility	WS300/WS310, WS700

Detailed description

B&G 20m mast cable for WS300/700 wind sensors

The 20-meter B&G mast cable is an essential component for ensuring the performance and reliability of your navigation system. Specifically designed for the B&G WS310 and WS700 series wired wind sensors, this cable provides a stable and durable connection between the masthead sensor and its interface, allowing for seamless integration into your NMEA 2000® network.

Reliable connection for accurate wind data

The accuracy of your wind data depends directly on the quality of the connection between the sensor and your instruments. This 20-meter (65-foot) cable uses pre-molded connectors and a robust thermoplastic sheath to withstand the harshest marine conditions. It ensures interference-free signal transmission, providing you with the reliable and consistent wind information you need for cruising or racing.

Simplified installation and optimized performance

As a genuine B&G part, this cable is designed for optimal compatibility and performance. Pre-assembled connectors simplify installation, ensuring quick and hassle-free commissioning. The 20-meter length is suitable for a wide range of sailboats, providing a professional and durable wiring solution for your B&G anemometer.

Expert opinion

Pol CONIN

Digital Manager

« Masthead signal reliability: the key to WS sensor performance »

This is not just a cable, but a critical link in the B&G instrumentation performance chain. Its thermoplastic construction and overmolded connectors are specifically designed to withstand the harsh masthead environment (UV, salt, vibrations), a frequent failure point with standard cables. Using this genuine B&G cable is the only guarantee of perfect signal integrity for the high-precision data from the WS310 and WS700 sensors. Any loss or alteration of this signal can distort layline calculations and speed polar diagrams, thus compromising racing performance and cruising safety.

Durabilité

Facilité d'installation

Rapport performance / prix

Payment and security

Your payment information and data are processed securely.

WS300/700 20m Cable

£87.43 GBP

£87.43 GBP ~~£110.45 GBP~~

Frequently Asked Questions

Need help? Contact us

Is this cable compatible with all B&G anemometer models?

No, this 20-meter cable (part number 000-14396-001) is specifically designed to be compatible with B&G WS300 and WS700 wind sensors.

What is the length of this cable?

This B&G wind sensor cable is 20 meters long.

Is this cable easy to install?

The installation of the B&G WS300/700 cable requires some expertise in marine electronics. It is recommended to consult the wind sensor installation manual and, if necessary, to use a professional.

Does the cable come with connectors?

The B&G WS300/700 cable (000-14396-001) generally comes with the necessary connectors for correct installation. Please check the documentation provided with the product for more details.

Can I use this cable with a wind transducer model other than the WS300 or WS700?

No, this cable is specifically designed for the B&G WS300 and WS700 models. Use with other models may cause compatibility issues and damage your equipment.

Is the cable resistant to UV and marine conditions?

Yes, the B&G WS300/700 cable is designed to withstand harsh marine conditions, including exposure to UV and saltwater. However, regular inspection is recommended to detect any signs of wear.

Where can I find the installation manual for the wind sensor compatible with this cable?

The installation manual for the compatible B&G wind sensor (WS300 or WS700) is usually provided with the sensor itself. You can also download it from the B&G manufacturer's website.

What is the weight of this cable?

The approximate weight of this 20-meter B&G WS300/700 cable is 0.96 kg.

Is this cable sold individually?

Yes, this B&G WS300/700 20m cable (000-14396-001) is sold individually.

Are there any special precautions to take when installing the cable?

Yes, it is important not to bend or pinch the cable during installation, as this could damage the internal wires. Also, ensure that the connectors are properly secured and waterproof.

Is this cable compatible with the NMEA 2000 system?

This cable is used to connect the wind sensor to the rest of the system. NMEA 2000 compatibility will depend on the wind sensor itself and its interface, not directly on the cable.

Can I cut the cable if it is too long?

It is not recommended to cut the cable. If the length is excessive, it is best to coil it carefully, avoiding tight loops. Cutting the cable could affect its performance and void the warranty.

What is the difference between this cable and a standard cable?

This cable is specifically designed for B&G WS300 and WS700 wind sensors. It is made with marine-grade materials and is designed to withstand harsh environmental conditions. A standard cable may not offer the same durability and performance.

Is this cable waterproof?

The cable itself is designed to resist moisture and water splashes. However, the waterproofness of the connection will depend on the quality of the connector installation and the use of appropriate seals.

Is this cable compatible with other B&G wind transducer models besides the WS300 and WS700?

This cable is specifically designed for the B&G WS300 and WS700 wind transducers. Compatibility with other models is not guaranteed.

What is the exact length of this cable?

This cable for the B&G WS300/700 wind transducer is 20 meters long.

Does the cable come with connectors?

Information regarding the presence of connectors is not available in the product description. It is recommended to check with the supplier or manufacturer.

Where can I find installation instructions for this cable?

Installation instructions are usually provided with the product. You can also check the B&G manufacturer's website for documentation or contact their technical support.

Is this cable easy to install yourself?

Installing a wind transducer cable may require some marine electronics skills. If you are not confident in your ability to perform the installation correctly, it is recommended to hire a professional.

What is the diameter of the cable?

The cable diameter is not specified in the product description. Please refer to the manufacturer's technical data sheet for this information.

Is this cable compatible with older B&G wind transducer models?

This cable is designed for the WS300 and WS700 models. Compatibility with older models is not specified. It is recommended to check compatibility with the manufacturer.

Does this cable come with a warranty?

The presence and duration of any warranty are not mentioned in the product description. Please check the warranty conditions with the seller or manufacturer.

Can I cut this cable to the desired length?

It is not recommended to cut the cable, as this could affect its performance and void the warranty. If a specific length is needed, it is best to check if other lengths are available.

What type of connector is used for this cable?

Information regarding the type of connector used is not available in the product description. Please consult the manufacturer's technical documentation for this information.

Is this cable compatible with instruments from other brands?

This cable is designed to work with B&G WS300 and WS700 wind transducers. Compatibility with instruments from other brands is not guaranteed.

Does replacing the cable require recalibration of the wind transducer?

Recalibration of the wind transducer may be necessary after replacing the cable. It is recommended to consult the wind transducer's user manual for the calibration procedure.