Unlock code for H5000 Hercules CPU to Performance

This is a software upgrade in the form of an activation code. It is not a physical product. This code allows you to unlock advanced features on a B&G H5000 Hercules-level navigation processor, upgrading it to the Performance level.

The upgrade to Performance level unlocks several advanced features for complex systems:

Support for two wind transducers: Ensures reliable wind data readings, even if one is masked by sails.Support for dual rudders: Allows monitoring of each rudder's angle and calculation of toe-in angle.Multiple keel tracking: Manages data from multiple appendages (port, starboard, center) and calculates active draft.Rate of Turn data: Provides information on the boat's rate of rotation.Ground Wind calculation: Calculates wind speed and direction relative to the ground.

No, this code is exclusively designed to upgrade a B&G H5000 Hercules level processor (CPU). It is not compatible with H5000 Hydra level CPUs or other navigation systems.

The installation is purely software-based. Once the code is purchased, you will need to enter it directly into the configuration interface of your H5000 system. No hardware intervention or physical modification of your equipment is necessary.

This upgrade is specifically intended for large offshore cruising sailboats, racing multihulls, and superyachts. It is particularly useful for boats equipped with complex and redundant instrumentation systems, such as multiple wind sensors, rudders, or daggerboards.

Yes, you can apply the upgrade. However, to fully benefit from the new features like support for double rudders or double wind sensors, the corresponding hardware must be installed and connected to your H5000 system.

The Hercules level is the base for racing, with features like 3D motion correction. The Performance level, activated by this code, adds superior calculation capabilities to handle redundant and complex hardware configurations (dual sensors, multiple appendages), which is crucial for very large sailboats and racing multihulls.

Code activation is a procedure that can generally be performed by the user via the H5000 system interface. However, if you are not familiar with your system's configuration, the assistance of a qualified B&G technician is recommended to ensure correct installation.

The upgrade does not alter the intrinsic accuracy of your sensors. However, by allowing the management of redundant sensors (e.g., two wind sensors), it ensures greater reliability and continuity of data, which can indirectly lead to better performance based on more complete information.

No, this specific code (000-11759-001) is only for upgrading from Hercules to Performance. B&G offers other codes for upgrading from Hydra to Hercules. You must purchase the code corresponding to your current processor and the feature level you wish to achieve.

The toe-in angle is the difference in angle between the two rudders. On multihulls and some modern monohulls, adjusting this angle is crucial for optimizing hydrodynamic lift and reducing drag. The Performance upgrade allows the H5000 CPU to calculate and display this critical data for performance optimization.

No, activation by code is a permanent upgrade. Once the H5000 processor has been upgraded to the Performance level, it is not possible to revert to the previous feature set.

Yes, new data calculated by the H5000 CPU (such as ground wind, layline angle, etc.) will be available on your boat's NMEA 2000 network. You will be able to display it on compatible H5000 range displays and B&G Zeus multifunction displays.

The H5000 processor uses algorithms to automatically select the most reliable wind data, usually the one not disturbed by the mainsail. This ensures a more accurate and stable wind reading, especially when sailing downwind on large sailboats.

The serial number of your H5000 processor is generally accessible through the diagnostic or system information menus on your B&G display. It may also be written on a physical label directly on the processor housing.

Ground wind calculation does not require an additional wind sensor. The H5000 processor uses data from your wind transducer (apparent wind) along with speed and heading over ground data (SOG and COG) from your GPS to calculate the true wind speed and direction relative to a fixed point.

It is strongly recommended to ensure that your H5000 processor and your entire B&G system have the latest available software version (firmware). This ensures optimal compatibility and stability when activating new features.

No, the activation license is tied to the serial number of a specific H5000 processor. It is not transferable to another device. If your CPU is replaced, a new license will need to be purchased for the new hardware.

On racing sailboats or large multihulls, the precise position of daggerboards or foils has a major impact on performance and stability. The Performance package allows the system to track the position of multiple appendages, calculate active draft, and provide this essential data to the crew for optimal real-time adjustment.