B&G H5000 Pupitre de commande du pilote - photo 2

B&G H5000 Pupitre de commande du pilote - photo 3

B&G H5000 Pupitre de commande du pilote - photo 4

B&G H5000 Pupitre de commande du pilote - photo 5

B&G H5000 Pupitre de commande du pilote - photo 6

Free pickup point from €150 in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

thanks to our network of approved installers

Find an installer

Support service

Opt for additional installation assistance

Save 19%

B&G

000-11544-001

H5000 Pilot Control Panel

Dedicated control head for the B&G H5000 autopilot system, offering direct and intuitive control of essential functions such as Auto/Wind modes and heading adjustments in 1° or 10° increments. Its IPX7 waterproof design and unique NMEA2000 connection for power and data ensure easy integration and maximum reliability.

Retail priceBenefit from the professional rate

£445.24 GBP

£445.24 GBP ~~£553.20 GBP~~

Shipping calculated at checkout.

Low stock

Free pickup point from €150 in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

thanks to our network of approved installers

Find an installer

Support service

Opt for additional installation assistance

Technical specifications

NMEA 2000 Load Equivalency Number (LEN)	1
Operating voltage	12
Max power consumption	1.6 W
Typical power consumption	1.2 W
Recommended fuse rating	1 A
Product width	115
Product height	115
Product depth	56
IP rating	IPX7
Bus compatibility	NMEA 2000
Wired network	NMEA 2000
Wireless connectivity	None
Mounting type	Flush-mounted
Certifications	CE
Steering modes	Anchor, Auto, Wind, No-drift, Navigation, Assisted steering
Button type	Keypad
Backlit keypad and display	Yes
MOB input	No
Remote control compatibility	No
Display type	LCD
Flush mount	Yes
H5000 series compatibility	Yes
Max operating temperature	55
Min operating temperature	-15
Power supply	Via NMEA2000 bus
Product type	Autopilot control panel
Product weight	0.18
Screen size	2"
Soft-touch buttons	Yes
IP rating	IPX7

Detailed description

The B&G H5000 Autopilot Control Unit is a dedicated control unit designed for reliable and intuitive management of the powerful H5000 autopilot system. It ensures precise control and clear feedback, whether used as a primary controller or as a secondary station in conjunction with a B&G Zeus chartplotter.

Dedicated control and clear interface

Equipped with a dedicated keyboard, its interface has been designed for simple and secure use, even with wet or gloved hands. The bonded monochrome LCD screen, with a resolution of 128 x 64 pixels and measuring 35 x 25 mm, offers excellent readability from all angles and in all lighting conditions. Its bonded design prevents condensation from forming. The LED backlight is adjustable to 10 levels for optimal reading comfort day and night.

Integration and technical specifications

This control panel integrates seamlessly into the H5000 ecosystem, receiving data and power directly via the NMEA 2000 network. It is designed to work in tandem with the H5000 pilot computer, ensuring maximum responsiveness and performance for all functions, from commissioning to navigation.

Network connectivity: 1x Micro-C connector (NMEA 2000)
Power supply: 12V DC via mains, power consumption 1.6W
Waterproofing: IPX7 certified
Dimensions (W x H x D): 70 x 114 x 8 mm (visible part on the front)
Weight: 0.18 kg

Positioning within the H5000 range

Unlike pilot control via a Zeus multifunction display, the H5000 Pilot Control Desk offers direct, touch-sensitive access to essential autopilot functions. It is the ideal complement to the H5000 Graphic and Race Displays, providing a dedicated control solution for sailors who demand uncompromising reliability and ergonomics for managing their pilot.

Expert opinion

Pol CONIN

Digital Manager

« The essential control interface for the H5000 autopilot »

The H5000 Pilot Controller is much more than a simple accessory; it is an essential component for any H5000 autopilot system. Its main advantage lies in its tactile feedback and ease of use, which remain unmatched by a multifunction display interface, especially in rough seas or when wearing gloves. Integration via NMEA2000 ensures reliability: a single cable for power and data reduces potential failure points. Its IPX7 certification confirms a design intended for exposed installations. For a helmsperson, having this direct and unambiguous control is a critical factor for safety and performance.

Durabilité

Facilité d'installation

Rapport performance / prix

Payment and security

Your payment information and data are processed securely.

H5000 Pilot Control Panel

£445.24 GBP

£445.24 GBP ~~£553.20 GBP~~

Frequently Asked Questions

Need help? Contact us

What is the purpose of the B&G H5000 autopilot control head?

The B&G H5000 autopilot control head is a dedicated control interface for the H5000 high-performance autopilot system. It provides direct and intuitive access to essential autopilot functions, whether racing or cruising.

What are the main functions directly accessible from the H5000 control head?

The H5000 control head offers direct access to the following functions:

Autopilot activation (AUTO) and deactivation (STBY).

Mode change (compass/wind).

Heading adjustment (+/- 1° and +/- 10°).

Activation of the power steering (NFU) mode in standby.

How does the H5000 control head connect to the system?

The H5000 control head connects to the system via a NMEA2000 cable. This network provides both power to the control head and data transmission with the autopilot computer.

Is the H5000 autopilot control head waterproof?

Yes, the H5000 control head is fully waterproof to IPX7 standard. It is designed to withstand harsh marine environments.

What is the Non-Follow-Up (NFU) mode and how do I activate it with the H5000 control head?

The Non-Follow-Up (NFU) mode allows manual helm control via the autopilot. It is activated in standby mode by pressing the heading change buttons (+/- 1° and +/- 10°).

Is the H5000 autopilot control unit compatible with other B&G systems?

Yes, the H5000 control unit is designed to integrate seamlessly with the B&G ecosystem. It is compatible with other components of the H5000 system via the NMEA2000 network.

What is the screen size of the H5000 control head?

The H5000 control head is equipped with a 2" screen.

How can I adjust the screen brightness of the H5000 control unit?

To access the lighting settings, press and hold the MENU button for 3 seconds.

What is the required power supply voltage for the H5000 control unit?

The H5000 control unit is powered via the NMEA2000 bus.

Where can I find the user manual for the H5000 control unit?

The H5000 user manual is available online on the B&G website.

Can the H5000 control unit be used on a cruising sailboat?

Yes, the H5000 control unit is suitable for both racing and cruising. It offers reliable and intuitive autopilot control in all sailing conditions.

What autopilot modes are available with the H5000 control unit?

The H5000 control unit allows selection of different autopilot modes, including:

Auto (heading) modeWind modeNo drift modeNavigation mode (to a waypoint or along a route)

If I have multiple B&G displays, can the H5000 control unit control the autopilot on any of them?

The H5000 control unit is a dedicated controller for the H5000 autopilot. It interacts with the autopilot computer and affects the autopilot's behavior, regardless of which display shows the data.

Does the H5000 autopilot control unit come with all the necessary cables for installation?

The H5000 control unit requires an NMEA2000 connection. The exact contents of the box may vary, so it is recommended to check the list of included accessories or contact the dealer for more details.

What is the weight of the H5000 autopilot control unit?

The H5000 autopilot control unit weighs 0.18 kg.

What is the B&G H5000 autopilot control panel used for?

The B&G H5000 autopilot control panel is a dedicated control unit designed to reliably and intuitively manage the H5000 autopilot system. It can function as the primary controller or as a secondary station, complementing a B&G Zeus chartplotter. It provides precise control and clear feedback for all autopilot functions.

How is the H5000 control head powered and connected to the system?

The H5000 control console is powered and receives its data directly via the NMEA 2000 network. It has a Micro-C connector for this connection.

Its nominal power supply is 12V DC (range 9-16V) and it consumes approximately 1.6W.

Which other B&G equipment is the H5000 control console compatible with?

The H5000 autopilot control console is designed to integrate seamlessly with the B&G H5000 ecosystem. It is compatible and operates in tandem with:

The H5000 autopilot computer.B&G Zeus chartplotters, where it can serve as a secondary station.H5000 Graphic and Race Display displays.It connects to these systems via the NMEA 2000 network.

What are the characteristics of the H5000 control head display?

The H5000 control head is equipped with a bonded monochrome LCD screen, providing excellent readability. Its characteristics are as follows:

Resolution: 128 x 64 pixels.Screen dimensions: 35 x 25 mm.Design: The screen is bonded to prevent condensation buildup.Backlight: LED-based, adjustable over 10 levels for optimal readability in all lighting conditions.

What is the H5000 autopilot control head used for and how does it integrate with the system?

The B&G H5000 autopilot control head is a dedicated control unit designed to reliably and intuitively manage the powerful H5000 autopilot system. It provides precise control and clear feedback, serving as either the primary controller or a secondary station in addition to a B&G Zeus chartplotter.

Its interface features a dedicated keypad for simple and secure operation, even with wet or gloved hands. The bonded 128 x 64 pixel monochrome LCD screen (35 x 25 mm) delivers excellent readability from all angles and in all lighting conditions. The bonded design prevents condensation buildup, and its LED backlight is adjustable across 10 levels for optimal visual comfort.

This control head integrates seamlessly with the H5000 ecosystem by connecting via a Micro-C connector to the NMEA 2000 network. It receives both data and power (12V DC, 1.6W consumption) directly through this network. Designed to work in tandem with the H5000 autopilot computer, it ensures maximum responsiveness and performance for all steering functions. Its waterproofing is certified to IPX7.