ECLIPSE Strip Lt SL100-Blue-White 2.5m, LS, (60-0489-2500) - Garmin image 1

Free pickup point from €150 in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

thanks to our network of approved installers

Find an installer

Support service

Opt for additional installation assistance

Save 6%

Garmin

010-04484-00

ECLIPSE SL100, blue/white LED light strip, 2.5 m

Designed for discreet marine lighting, the Garmin ECLIPSE Strip Light SL100 is a flexible 2.5-meter dual-color LED strip (blue and 5000K white) with IP68 protection. It is cuttable, UV-resistant, and easily integrates for ambient or functional lighting. Supplied with a sealing kit (silicone, end caps) and mounting clips.

Retail priceBenefit from the professional rate

£65.92 GBP

£65.92 GBP ~~£69.98 GBP~~

Shipping calculated at checkout.

In stock

Free pickup point from €150 in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

thanks to our network of approved installers

Find an installer

Support service

Opt for additional installation assistance

Technical specifications

Type de produit	Marine LED strip
Operating voltage	10-15 VDC
Typical power consumption	12.5
Light color	Blue, White
IP rating	IP68
Longueur du ruban	2.5
Densité LEDs / mètre	60.0
Dos adhésif	Oui
Bend Axis Restriction	Vertical only
Cuttable	Yes
Direct Sunlight Exposure Restriction	Yes
Min Bend Radius Vertical Mm	50
Mounting Clips Included	Yes
Installation professionnelle recommandée	Yes
Sealing Kit Included	Yes
Strip Height Mm	5.2
Largeur du ruban	12.0
Submersion Resistance	No

Detailed description

Designed for discreet and functional marine lighting, the Garmin ECLIPSE SL100 bicolor LED light strip (reference 010-04484-00) is a flexible and robust solution. This LED strip integrates 60 LEDs per meter, providing simultaneous or separate illumination in blue and white (5000K). Its IP68 rating ensures full resistance to water and dust, making it suitable for indoor and outdoor installations, including damp areas, though it is not designed for permanent submersion.

Technical specifications and installation flexibility

The SL100 operates on 10 to 15 VDC, specifically for 12V boat systems, with a typical power consumption of approximately 5 watts per meter per channel (i.e., 0.41A at 12V). Its UV-resistant and fully encapsulated material design ensures durability in a marine environment. With a cross-section of 10.8mm x 5.2mm, it offers discreet integration. It can be cut at marked points to fit the desired length precisely, and the ends are sealed using the provided kit (silicone and end caps). Installation is done via pre-applied 3M adhesive, supplemented by included screw clips for reinforced fixing, particularly recommended for outdoor installations or areas subject to vibrations. The strip has a minimum bending radius of 50mm on the vertical axis, avoiding any twisting or bending on the horizontal axis.

Control options and positioning within the range

The Garmin ECLIPSE SL100 bicolor LED light strip can be controlled by a simple on/off/on switch, allowing switching between blue and white (it is important not to wire both channels to light up simultaneously with a direct switch). For more advanced control, it is compatible with an optional ECLIPSE Command Center, enabling control via Garmin multifunction displays (MFD) or smart devices. This versatility positions it as an intermediate lighting solution in the Lumishore/Garmin range, offering more features than basic monochrome models while being less complex than an RGB system, which requires an ECLIPSE Command Center. It is ideal for ambient lighting under gunwales, in lockers, or under cockpit furniture.

Documentation

Type	Nom
	Notice d'installation - Guide d'installation bandeau lumineux ECLIPSE SL100 (EN)

Expert opinion

« Garmin ECLIPSE SL100 flexible marine lighting: versatility and discretion »

The Garmin ECLIPSE Strip Light SL100 LED strip is a relevant solution for integrating ambient or courtesy lighting on recreational boats of all sizes. Its flexible design allows it to follow the contours of the boat, offering a level of discreetness that rigid fixtures cannot match. The blue/white dual-color option is an asset, with blue often preferred for night navigation or subdued ambiance, and white for functional lighting. This duality enables adapting the lighting without requiring a more complex and costly RGB system.

In terms of installation, the ability to be cut to length is a major advantage, allowing precise customization of the strip. It is crucial to respect the marked cut points and to carefully seal the ends with the provided kit to maintain the IP68 rating of the product. Using both the adhesive and mounting clips is highly recommended, especially in areas exposed to vibrations or constant humidity. While direct connection via a switch is possible for both colors, integration with an ECLIPSE Command Center provides a superior user experience through Garmin MFDs, enabling centralized control and more advanced lighting scenarios. It is imperative not to bend the strip along the horizontal axis to avoid damaging the internal circuits, and to ensure the boat's electrical system is properly 12V DC.

Durabilité

Facilité d'installation

Rapport performance / prix

Payment and security

Your payment information and data are processed securely.

ECLIPSE SL100, blue/white LED light strip, 2.5 m

£65.92 GBP

£65.92 GBP ~~£69.98 GBP~~

Frequently Asked Questions

Need help? Contact us

What is the length of this Garmin ECLIPSE LED strip?

This Garmin ECLIPSE SL100 light strip is supplied in a 2.5-metre length.

What lighting colors are available for this LED strip?

This specific model of the ECLIPSE SL100 LED light strip provides dual-color lighting, in blue and white (5000K). It allows simultaneous or separate illumination of these two colors.

Is this LED strip waterproof and dustproof?

Yes, the Garmin ECLIPSE SL100 light strip has an IP68 protection rating. This means it is fully resistant to water and dust, making it suitable for indoor and outdoor installations, including wet areas. However, it is not designed for permanent submersion.

What is the required supply voltage for this LED strip?

The ECLIPSE SL100 LED strip is designed to operate with 12 V DC boat systems only. It functions within a continuous voltage (DC) range of 10 to 15 Volts. It must not be connected to voltages outside this range or directly to an alternating current (AC) supply.

Can I cut the LED strip to a shorter length?

Yes, the LED light strip can be cut at marked points to fit the desired length precisely. A kit is provided to seal the cut ends.

How to seal the ends of the LED tape after cutting it?

To seal a cut end, first remove about 20 mm of the adhesive backing and lightly score the adhesive 10 mm from the end. Then peel the tape from the score line to expose the silicone. Fill the end cap halfway with the supplied silicone adhesive, then fit the cap and wipe off excess adhesive. Allow 24 hours to cure before handling.

What is the power consumption of this LED strip light?

The typical power consumption of this LED light strip is about 5 watts per meter and per channel. The typical current draw is 0.41 ampere at 12V per channel.

How is the light strip mounted on the surface?

Installation is primarily done using a 3M adhesive pre-applied to the tape. For reinforced fixing, particularly recommended for outdoor installations or damp areas, screws and clips are also included.

What precautions should I take when installing the LED strip?

Before installation, ensure the ship's power source and battery are disconnected or isolated. It is recommended not to install the strip in areas exposed to direct strong sunlight. Do not bend the strip along the horizontal axis or twist it. For lengths over one meter, it is advisable to install with two people. Do not apply pressure on the LEDs, only on the edges of the strip.

Can the ribbon be bent to fit curves?

Yes, the tape has a minimum bend radius of 50 mm (1.968 inches) on the vertical axis. It is important not to bend it on the horizontal axis or twist it.

Can the blue and white channels of the ribbon be lit simultaneously?

No, it is important not to wire the blue and white channels so they light up at the same time. The strip is designed for simultaneous or separate illumination, but the wiring must be done so as not to activate both channels simultaneously via a single simple switch.

Is mechanical fastening required for outdoor installation?

Yes, for outdoor installations, wet areas, or tight bends, it is recommended to use mechanical fasteners (screw clips) in addition to the adhesive layer. These fasteners should be spaced 250 to 300 mm apart and/or placed on each side of a bend, avoiding alignment with the LEDs.

What is the durability of the LED light strip in a marine environment?

The LED strip is made from UV-resistant material and is fully encapsulated, ensuring good durability in the marine environment. Its IP68 rating also enhances its resistance to water and dust.

Is the LED light strip compatible with an ECLIPSE Command Center?

Yes, this bicolor LED strip can be controlled by an ECLIPSE Command Center. Specific wiring diagrams are provided for this configuration. It is important to consult the Command Center installation manual for complete instructions and note that monochrome, bicolor, and RGB lights must not be added to the same zone output.

What are the width and thickness of the LED tape?

The LED strip section measures 10.8 mm in width by 5.2 mm in thickness, allowing for a discreet installation.

How long should the 3M adhesive be left to cure before using the tape?

It is recommended to let the 3M adhesive cure for 24 hours before turning on the LED strip to ensure optimal adhesion.

How to prepare the mounting surface before adhesive installation?

Before applying 3M adhesive, the mounting surface must be thoroughly cleaned with isopropyl alcohol (IPA) to ensure it is free of dust and dirt.

Is the light strip designed to be installed by a professional?

A qualified professional should perform the electrical and mechanical installation to ensure a correct and safe installation.

Which type of boat electrical system is compatible with this LED light strip?

This LED strip is specifically designed to operate with 12V boat systems. It is compatible with direct current (DC) voltages ranging from 10 to 15 Volts.