EOS TIX404 Set, 2 Lights, Hub, LUX Command Center - Garmin

Kit EOS TIX404, 2 projecteurs, concentrateur et centre de commande LUX - visuel officiel Garmin 2

Kit EOS TIX404, 2 projecteurs, concentrateur et centre de commande LUX - visuel officiel Garmin 3

Free pickup point from €150 in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

thanks to our network of approved installers

Find an installer

Support service

Opt for additional installation assistance

Save 13%

Garmin

010-04530-00

EOS TIX404 Kit, 2 underwater lights, i-Connect Hub and EOS-LUX Command Center

The EOS TIX404 Garmin/Lumishore kit includes 2 TIX404 RGBW through-hull lights (16,875 lm, IP68, marine bronze), 1 EOS i-Connect Hub, and 1 EOS-LUX Command Center control unit (IP67), compatible with Garmin OneHelm, B&G, Raymarine, Simrad, Lowrance, and Furuno MFDs. Features WiFi control and DMX 512 integration. The kit ships with 2 lights (3 m cables included), the hub, and the LUX Command Center — DMX extension cables and power cables must be purchased separately based on the wiring plan.

Configuration: No display

No display With screen

Retail priceBenefit from the professional rate

£3,473.70 GBP

£3,473.70 GBP ~~£4,029.47 GBP~~

Shipping calculated at checkout.

In stock

Free pickup point from €150 in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

thanks to our network of approved installers

Find an installer

Support service

Opt for additional installation assistance

Technical specifications

Type de produit	Underwater light
Installation type	Hull penetration
Operating voltage range	10.5 — 31 V DC
Typical power consumption	151.2
Flux lumineux	7500.0
Angle du faisceau	110.0
Température de couleur	6500.0
Light color	RGBW (red, green, blue, white)
Diamètre extérieur	88.0
Housing material	Bronze marine with borosilicate glass lens
Couleur / finition	Marine bronze
IP rating	IP68 (floodlights), IP67 (control unit)
Variateur compatible	Oui
Durée de vie prévue	50000.0
Amperage	5.8 A (12 V) / 2.9 A (24 V) per spotlight
Atrb Thermal Rollback	Yes
Backup/restore configuration	Yes
Beam coverage angle	110°
Bonding Required	true
Command Center Ip Rating	IP67
Command Center Power Consumption A	0.5
Communications Protocol	Lumi-DMX (DMX 512 and RDMX)
Type de contrôle	Certified MFD display, EOS-LUX-SUPRA screen, smartphone app via WiFi
Customizable Strobe Mode Support	Yes
Diamètre de découpe d'installation	57
Product dimensions	Display diameter: 88 mm, Case height: 8 mm, Shaft length: 136 mm
Dmx External Support	Yes
Diamètre de foret requis	57
Fuse rating	7.5 A (12 V DC) / 4 A (24 V DC)
Housing Profile Height Mm	8
Hub Max Lights	4
Hull Isolation Available	true
Inrush Current Protection	Yes
Installation Depth Below Waterline	150 to 250 mm (6" to 10")
Simplicité d'installation	Plug-and-Play
Nombre de LED par projecteur	52
Durée de vie LED	50000
Lights Spacing Recommendation	0.8 to 2 m (2.5 to 6.5 ft)
Light Cable Length Standard	3
Light Driver Type	Multi-Channel Internal Driver
Light Face Diameter Mm	88
Light source type	High-power RGBW LED (HICOB network)
Max Light Cable Length	6
Max Vessel Length	25
MFD compatibility	Garmin (OneHelm), Raymarine Axiom, Navico (Simrad, B&G, Lowrance), Furuno NavNet TZtouch3
Mfd Integration	Via EOS-LUX Command Center
Mounting type	Hull penetration (thru-hull)
Ota Updates Support	Yes
Package contents	2 TIX404 through-hull lights, 1 EOS i-Connect Hub concentrator (60-0321), 1 EOS-LUX Command Center control unit (60-0366)
Power Line Noise Suppression	Yes
Power Management Type	Intelligent Multi-Channel Power Management
Preset Colors Support	Yes
Product range	EOS Series
Poids du produit	1.2
Random Strobe Mode Support	Yes
Shaft Length Mm	136
Soft Start Protection	Yes
Sound To Light Function	Yes
Protection contre les surtensions	3 000 V
Total Lumens	33750
Warranty	3
Wireless connectivity	Wi-Fi
Zone Control	Yes

Detailed description

The Garmin/Lumishore EOS TIX404 kit is a complete, ready-to-install underwater lighting system, including two TIX404 through-hull underwater lights, an EOS i-Connect Hub, and an EOS-LUX Command Center. This package targets owners of cruisers, yachts, and superyachts up to 25 meters seeking a structured installation integrated into their onboard network and controllable from their multifunction display.

TIX404 Lights: Power and RGBW Spectrum

Each TIX404 light delivers 16,875 raw lumens, with a white light output of 7,500 lumens, using a HICOB LED array of 52 LEDs in total: 12 white 10 W LEDs, 12 green 3 W LEDs, 12 blue 3 W LEDs, and 16 red 3 W LEDs. The 110° beam angle provides a wide light spread under the hull. The marine-grade bronze housing with borosilicate glass lens, IP68 rating, and typical LED lifespan exceeding 50,000 hours position this light as a reference in Lumishore’s EOS range. Compared to SMX or THX models in the same series, the TIX404 stands out for its interchangeable through-hull design, simplifying LED module replacement without hull intervention. The operating voltage range is 10.5 to 31 V DC, with a maximum current draw of 5.8 A at 12 V and 2.9 A at 24 V. Each light comes with a 3 m preinstalled cable (total maximum length of 6 m with extension cable).

EOS-LUX Command Center: MFD Integration and WiFi Control

The EOS-LUX Command Center (part number 60-0366) is the system’s brain. IP67-rated and powered by 10.5–31 V DC with a 0.5 A current draw, it manages all lighting functions via the Lumi-DMX protocol (DMX 512 and RDMX). It is compatible with major MFD brands: Garmin (OneHelm), Raymarine Axiom, Navico/Simrad (NSO evo3/3S, NSS evo3/3S, NSX, IDS), B&G (Zeus³ Glass Helm, Zeus³/3S, Vulcan 7R/9/12), Lowrance (HDS Live, HDS Carbon, Elite FS), and Furuno NavNet TZtouch3. This multi-brand compatibility surpasses proprietary solutions like Garmin’s SeaLED system, which only integrates with the Garmin ecosystem. WiFi control from smartphones or tablets is also available via the MFD’s WiFi network or a local network. Available functions include zone management, customizable scenes, color cycling (spectrum, Ice, Sunset, Miami), fixed or random strobe mode, sound-light synchronization, synchronization of all lights, and automatic light discovery. Firmware updates are performed OTA (Over The Air), and system parameter backup/restore is included.

System Architecture and Installation: Plug-and-Play Kit

The EOS i-Connect Hub (part number 60-0321) can manage up to 4 lights per hub, allowing the system to be expanded to 8 lights by daisy-chaining two hubs via DMX extension cable. The installation relies on Plug-and-Play connections with pre-coded connectors to minimize wiring errors. Hull cutting requires a 57 mm (2.25") drill bit, and lights must be positioned 150 to 250 mm below the light waterline, spaced 0.8 to 2 m apart. A hull isolation kit is available for metal or carbon hulls. Grounding (bonding) is mandatory for galvanic protection on GRP or wooden hulls. Compared to purchasing components separately, this kit offers a consistent solution with a 3-year warranty on each component.

Documentation

Type	Nom
	Technical Reference - Datasheet for EOS TIX404 Underwater LED Floodlight (EN)
	Installation manual - EOS TIX404 underwater light installation and operating guide (EN)
	Technical Reference - EOS-LUX Control Center Datasheet (EN)
	User Manual - EOS-LUX Command Center setup and user guide (EN)
	Installation Guide - EOS-LUX Command Center Installation Guide (EN)

Expert opinion

Pol CONIN

Digital Manager

« Universal MFD integration and RGBW power: the reference underwater kit for yachts up to 25 m »

The Lumishore EOS TIX404 kit distributed by Garmin is one of the most advanced underwater lighting solutions on the market for 10 to 25-meter vessels. What sets this pack apart is the consistency of the ecosystem: the two TIX404 bronze underwater projectors with borosilicate glass are superyacht-grade fixtures, and their interchangeable through-hull design is a genuine maintenance advantage — the LED module can be replaced without removing the hull fitting. With 16,875 raw lumens per projector and an internal multi-channel driver managing thermal protection (ATRB), surge protection (3,000 V), and soft start, electronic reliability meets the strictest marine requirements. The EOS-LUX Command Center is the integration’s standout feature: its native OneHelm compatibility with Garmin, but also Raymarine, Navico, B&G, and Furuno, makes it a universal component that adapts to any existing installation. WiFi control, OTA updates, and configuration backups are functions rarely found at this price point in underwater lighting. During installation, Plug-and-Play connections reduce error risks, but the mechanical installation (57 mm hull drilling, mandatory bonding, positioning dimension compliance) remains a task for professionals. This kit is particularly relevant for owners seeking native integration into their MFD dashboard without multiplying control interfaces.

Durabilité

Facilité d'installation

Rapport performance / prix

Payment and security

Your payment information and data are processed securely.

EOS TIX404 Kit, 2 underwater lights, i-Connect Hub and EOS-LUX Command Center

£3,473.70 GBP

£3,473.70 GBP ~~£4,029.47 GBP~~

Frequently Asked Questions

Need help? Contact us

What is included in the Garmin EOS TIX404 kit?

The EOS TIX404 kit is a complete, ready-to-install underwater lighting system. It includes:

Two TIX404 hull-through lightsEOS i-Connect Hub concentratorEOS-LUX Command Center control unit

What are the lighting specifications of the TIX404 floodlights?

Each TIX404 floodlight delivers a total of 16,875 raw lumens. The white light output is 7,500 lumens. The beam angle is 110°, providing a wide light spread under the hull.

Do the TIX404 spotlights offer full color change?

Yes, the TIX404 spotlights are part of the EOS series and offer full color change (RGBW). They integrate 52 LEDs in total: 12 10 W white LEDs, 12 3 W green LEDs, 12 3 W blue LEDs, and 16 3 W red LEDs, allowing a wide color palette.

What are the materials and protection of the TIX404 floodlights?

The TIX404 floodlights feature a marine-grade bronze housing and a borosilicate glass lens. They are rated IP68, ensuring waterproofing and resistance to marine conditions.

What is the lifespan of the LEDs in the TIX404 underwater lights?

The typical lifespan of the LEDs in the TIX404 underwater lights exceeds 50,000 hours, ensuring significant longevity and reliability for your underwater lighting system.

What are the main features of the EOS-LUX control center?

The EOS-LUX control center allows you to manage your lighting system with advanced features, including:

Full control over RGB color spectrum and white temperature (2700K to 6500K)Fully configurable zone controlCreation and management of custom lighting scenesLumi-Link integration for control via a certified multifunction display (MFD) or EOS-LUX-SUPRA screenWi-Fi control via smartphone or connected deviceFirmware updates via radio link (OTA)Backup and restoration of system settings

Can the lighting system be controlled via Wi-Fi?

Yes, the EOS-LUX control hub allows Wi-Fi control from a smartphone or connected device, either via the Wi-Fi of your multifunction display (MFD) or via a local Wi-Fi network.

Is it possible to create lighting zones with the EOS-LUX control center?

Yes, the EOS-LUX control center supports fully configurable zone control. You can create distinct lighting zones for different parts of the vessel, including underwater lights, deck lights, or courtesy lighting. Each light can be assigned to a single zone.

Which special lighting modes are available with the EOS-LUX system?

The EOS-LUX system offers a variety of special lighting modes, including:

Color cycles (Spectrum, Ice, Sunset, Miami) with adjustable speedColor sweeps (Ice, Sunset, Miami) with adjustable speedFixed or random strobe modes (any color, adjustable speed)Predefined and customizable color palettesSound-to-Light functionality

Is the EOS-LUX Command Center system compatible with the "Sound-to-Light" function?

Yes, the EOS-LUX control center integrates the "Sound-to-Light" feature, allowing lighting to react and synchronize with ambient sound.

Is the EOS TIX404 kit suitable for all vessel sizes?

The EOS TIX404 kit is designed for cruisers, yachts, and superyachts, and is suitable for vessels up to 25 meters (80 feet) in length.

What are the recommendations for the installation location of the TIX404 floodlights on the hull?

For optimal performance, the TIX404 floodlights must be installed between 150 and 250 mm (6 to 10 inches) below the minimum waterline. They should be spaced 0.8 to 2 meters (2.5 to 6.5 feet) apart to ensure uniform illumination. It is also important not to install them near heat sources such as engine exhausts.

At what depth below the waterline should floodlights be installed?

TIX404 floodlights must be installed between 150 and 250 mm (6 to 10 inches) below the vessel's minimum waterline for optimal performance.

Which hull types are compatible with the installation of TIX404 underwater lights?

The TIX404 underwater lights can be installed on GRP (glass-reinforced plastic or fiberglass) and wooden hulls. For metal or carbon fiber hulls, a hull isolation kit is required.

Is bonding required for TIX404 spotlights?

Yes, TIX404 spotlights must be connected to the vessel’s DC grounding system via a bonding strap to prevent electrolytic/galvanic corrosion. However, if a hull isolation kit is used for a metal-hull installation, grounding of the lights is not required.

What is the required supply voltage for the system and its maximum power consumption?

The system (TIX404 floodlights and EOS-LUX control unit) operates within a supply voltage range of 10.5 to 31 V DC. Each TIX404 floodlight has a maximum power consumption of 5.8 A at 12 V or 2.9 A at 24 V. The EOS-LUX control unit consumes a maximum of 0.5 A at 12/24 V.

How to perform the initial setup of the EOS-LUX control center?

During the first installation, the system requires a quick setup. First, discover the lights connected to the EOS-LUX network. Then, the user can choose between a "Single Zone" or "Multi Zone" mode and define the positions of the lights around the vessel to ensure proper operation of modes such as sweeping. The default password to access the preferences is "0000".

Which multifunction displays (MFD) is the EOS-LUX control center compatible with?

The EOS-LUX control center is compatible with several MFD brands, including:

Garmin (compatible with OneHelm)Raymarine (Axiom with the partner Lighthouse app)Navico (Simrad NSO evo3/3S and EVO2, NSS evo3/3S, NSX, IDS and GO**; B&G Zeus³ Glass Helm, Zeus³/3S and Vulcan***; Lowrance HDS Live, HDS Carbon, Elite FS)Furuno (Navnet TZ Touch 3 series, requires an SD card Part Number 60-0377)It is recommended to verify your MFD compatibility before purchase.