[GARMIN] Caméra sans fil GC™ 100 - media 1

[GARMIN] Caméra sans fil GC™ 100 - media 2

[GARMIN] Caméra sans fil GC™ 100 - media 3

[GARMIN] Caméra sans fil GC™ 100 - media 4

Free pickup point from €150 in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

thanks to our network of approved installers

Find an installer

Support service

Opt for additional installation assistance

Save 24%

Garmin

010-01865-31

Garmin GC™ 100 Wireless Camera

The Garmin GC™ 100 wireless camera provides a flexible marine monitoring solution, integrating 2.4 GHz Wi-Fi connectivity with a 76-meter range for compatible Garmin chartplotters. Rated IPX6/IPX7 and equipped with an internal rechargeable battery, it operates reliably from -20°C to 60°C. The package includes the GC™ 100 camera, mounting bracket, screws, power cable, and tamper-proof tightening tool.

Retail priceBenefit from the professional rate

£234.16 GBP

£234.16 GBP ~~£308.66 GBP~~

Shipping calculated at checkout.

In stock

Free pickup point from €150 in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

thanks to our network of approved installers

Find an installer

Support service

Opt for additional installation assistance

Technical specifications

Operating voltage	10-30
Operating temperature	-20 to 60
Max power consumption	45 W
Recommended fuse rating	1.5
IP rating	IPX6/IPX7
Wired network	None
Wireless connectivity	Wi-Fi 2.4 GHz
Mounting type	Surface mount
Certifications	CE, FCC, ISED
Night vision capability	No
Compatible systems	Garmin Chartplotter
DC connector type	Direct power cable + Micro-USB (charging)

Detailed description

The Garmin GC™ 100 wireless camera is a marine surveillance solution designed to provide flexible installation and seamless integration with Garmin navigation systems. Positioned as an alternative to traditional wired cameras such as the Garmin GC™ 200, the GC™ 100 eliminates video cabling constraints with its wireless connectivity. It is particularly suited for monitoring key areas on board, such as the engine room, aft deck, or mooring points, where permanent cable installation would be complex or undesirable.

Connectivity and Integration

The Garmin GC™ 100 operates on a 2.4 GHz wireless frequency with a nominal power of 17 dBm, ensuring a maximum operational range of 76 meters (250 feet) from the Garmin chartplotter. Integration with the Garmin chartplotter’s Wi-Fi network is simplified, requiring minimal configuration and quick pairing. The connection process involves pressing the camera button three times to activate pairing mode, indicated by a blue LED flashing, then selecting the "Garmin Camera" option in the chartplotter’s wireless device settings.

Robust Design and Flexible Power

Designed for the marine environment, the Garmin GC™ 100 wireless camera meets IEC 60529 IPX6/IPX7 waterproof standards. This means it resists powerful water jets and accidental immersion up to 1 meter for 30 minutes, ensuring durability against spray and harsh weather. Its operating temperature range is from -20°C to 60°C, and from 0°C to 45°C for charging, ensuring reliability in various climatic conditions. Power input is flexible, accepting 10 to 30 Vdc (1.5 A max.) and featuring an internal rechargeable battery for occasional use or installations without direct continuous power. The battery can be recharged via the powered mount or a Micro-USB cable (not included).

Installation and Features

Installation of the Garmin GC™ 100 is facilitated by an included mounting bracket, allowing secure attachment. A clearance of 10 cm (4 inches) is recommended as a safety distance for the compass. LED indicators provide clear visual status: three green flashes on power-up, three red flashes on power-down, a blue flash for Wi-Fi connection, and an orange flash to signal low battery. This camera enhances situational awareness and safety on board, offering additional visibility without the complexity of wired installations.

Documentation

Type	Nom
	Installation Instructions - Garmin GC 100 Wireless Camera (EN)
	Compliance and Safety - Important safety and product information for the GC 100 camera (EN)

Expert opinion

Pol CONIN

Digital Manager

« Technical analysis: Garmin GC™ 100 wireless camera »

The Garmin GC™ 100 wireless camera is a practical solution for extending visibility onboard. Its 2.4 GHz Wi-Fi connectivity provides an operational range of 76 meters, enabling flexible monitoring of key areas of the vessel, such as the engine room, stern deck, or docking points, without the constraints of traditional video cabling. Integration is native and simplified with compatible Garmin chartplotters, requiring minimal configuration of the chartplotter's Wi-Fi network for pairing. The GC™ 100's robustness is confirmed by its IPX6/IPX7 certification, ensuring resistance to demanding marine environments, from spray to accidental immersion. Its operating temperature range of -20°C to 60°C guarantees reliability in various climatic conditions. The 10-30 Vdc power supply and rechargeable internal battery provide installation and usage flexibility, even for occasional needs. This camera is a strategic asset for situational awareness, maneuver safety, and general vessel monitoring.

Durabilité

Facilité d'installation

Rapport performance / prix

Payment and security

Your payment information and data are processed securely.

Garmin GC™ 100 Wireless Camera

£234.16 GBP

£234.16 GBP ~~£308.66 GBP~~

Frequently Asked Questions

Need help? Contact us

How to physically install the Garmin GC™ 100 camera on my boat?

Installing the GC™ 100 camera involves several steps:

Mounting: Use a 3.2 mm (1/8 in) drill bit to drill a pilot hole. Secure the camera mount to the mounting surface using the provided screw. Insert the camera into its housing, close the front of the housing, and tighten the tamper-proof side screws with the included tool.Mounting considerations: Install the camera in a location where it will not be submerged and within 76 m (250 ft) of a chartplotter. Test the desired location before permanent mounting. Ensure the cable can be easily connected and that the camera is not at risk of damage or posing a hazard.Power connection: Route the power cable to the power source and to the device. Connect the red wire to the battery’s positive (+) terminal and the black wire to the negative (-) terminal. Do not remove the inline fuse holder and ensure the correct fuse is in place.

Which Garmin devices is the GC™ 100 camera compatible with?

The GC™ 100 camera is designed to pair with compatible Garmin chartplotters featuring Wi-Fi connectivity. Before connecting the camera, you must configure the Wi-Fi network on your Garmin chartplotter.

What is the wireless connection range between the camera and the chartplotter?

The GC™ 100 camera must be mounted within 76 meters (250 feet) of a chartplotter. Actual range may vary depending on installation location and obstacles between the camera and chartplotter.

Is the GC™ 100 camera waterproof and suitable for use in harsh weather conditions?

Yes, the GC™ 100 camera is designed to withstand marine environments. It has an IEC 60529 IPX6/IPX7 waterproof rating, meaning it can handle accidental water exposure up to 1 meter for 30 minutes. Its operating temperature range is from -20 °C to 60 °C (-4 °F to 140 °F), ensuring reliability in various weather conditions.

How to turn the GC™ 100 wireless camera on and off?

To turn off the GC™ 100 camera, hold the button down for 3 seconds. Note that holding the button down for more than 10 seconds will reset the camera. Once installed and paired with the chartplotter, the camera typically turns on when the chartplotter is powered on.

What are the power supply requirements for the Garmin GC™ 100 camera?

The GC™ 100 camera requires an input voltage of 10 to 30 Vdc, with a maximum current of 1.5 A. It also features an internal rechargeable battery that can be charged via the powered camera mount or, alternatively, by connecting the camera to a power source using a Micro-USB cable (not included).

How to pair the GC™ 100 camera with my Garmin chartplotter?

To pair the GC™ 100 camera with a compatible Garmin chartplotter, follow these steps:

Ensure the camera is within 76 meters (250 feet) without obstruction of the chartplotter.Configure the Wi-Fi network of your chartplotter. Refer to your chartplotter’s manual for details.Press the camera button three times. The LED indicator will start flashing blue.On the chartplotter, select Settings > Communications > Wireless Devices > Garmin Camera > Start.The chartplotter will display a notification once pairing is complete. It may be necessary to charge the camera’s internal battery before pairing.

What do the different LED indicator colors on the camera mean?

The status LED on the GC™ 100 camera indicates its operational state through different blinking sequences:

Green (three blinks): The camera is powering on.Red (three blinks): The camera is powering off.Blue (one blink per second): The camera is attempting to connect to a chartplotter via Wi-Fi.Orange (one blink per second): The camera battery is not sufficiently charged to stream video.