GARMIN ELEC. Garmin 010-00957-00 GSD 24 Module de sondeur avancé ...

Module sondeur avancé GSD™ 24 - visuel officiel Garmin 4

Free pickup point from €150 in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

thanks to our network of approved installers

Find an installer

Support service

Opt for additional installation assistance

Save 0%

Garmin

010-00957-00

Garmin GSD™ 24 Advanced Sonar Module

The Garmin GSD™ 24 sounder module is an advanced "black box" unit designed for Garmin navigation systems. It delivers up to 2,000 W RMS output power and a depth capability of 1,512 meters at 50/200 kHz, outperforming built-in transducers for superior detection.

This module is a proven solution for traditional sonar, effectively complementing Garmin multifunction displays. It comes with mounting hardware and cable locking collars.

Retail priceBenefit from the professional rate

£424.31 GBP

£424.31 GBP ~~£426.52 GBP~~

Shipping calculated at checkout.

In stock

Free pickup point from €150 in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

thanks to our network of approved installers

Find an installer

Support service

Opt for additional installation assistance

Technical specifications

Supported sonar technologies	Traditional fishfinder (2D)
Operating voltage	10-35
Fishfinder frequencies	50/200
Operating temperature	-15 to 70
Nombre de canaux	2.0
Max power consumption	40
Sonar connector type	8-pin
Typical power consumption	40 W (maximum)
Compatible displays	Garmin multifunction displays compatible
Recommended fuse rating	7.5
Product width	283
Product height	81
Product depth	204
IP rating	IPX7
Bus compatibility	Garmin Marine Network
Wired network	Garmin Marine Network
Compass safe distance	40
Mounting type	Flush-mounted
Certifications	CE Compliant, FCC Compliance, Canada certification, RoHS Compliant, REACH Compliant, WEEE Compliant
Available alarms	System error alerts (indicated by LED and displayed on compatible chartplotter)
Code-barres du produit	0753759969721
Beam coverage angle	Depends on the connected transducer
Cable Locking Rings Included	Yes
Cable Routing Grommets Available	Yes
Case Gasket Type	Fully sealed
Ce Directive Red	2014/53/EU
Distance de sécurité compas	40
Copyright Year	2022
Pays de fabrication	Taiwan
Co Location Restriction	Yes
Taille de découpe d'installation	260 x 163
Nombre de ports Ethernet	1
Eu Declaration Of Conformity Url	garmin.com/compliance
Fishing type	Deep-sea fishing, Offshore fishing
Gnss Interference Warning	Yes
Immersion Prohibition	Yes
Installation Manual Doc Number	190-00789-02_0D
Installation Manual Revision Date	September 2014
Installation Precaution Fiberglass	Use a countersink bit to drill the gelcoat to prevent cracking.
Installation Precaution Stainless Screws	Apply anti-seize lubricant to stainless steel screws.
Required installation tools	Drill, 5 mm bit, 32 mm hole saw, #2 Phillips screwdriver, 3 mm flathead screwdriver, wire cutter, wire stripper, cable ties (optional), marine sealant (optional)
Integrated GPS antenna	No
Integrated speed sensor	No (depends on connected transducer)
Integrated temperature sensor	No (depends on connected transducer)
ISED certification	Yes
Max depth	1512 m
Max depth reading	1512
Man overboard (MOB) support	No
Diamètre des trous de fixation	5
Mounting Template Doc Number	190-00789-03 Rev. B
Mounting Template Revision Date	October 2011
Network Expander Compatibility	Garmin GMS 10
Network Sharing Capability	Yes
Package contents	GSD™ 24 fishfinder module, power cable, Garmin marine network cable, mounting kit, cable locking rings, documentation.
Peak power	16000
Power Cable Fuse Holder Integrated	Yes
Power connector pin count	2
Power Connector Type	Garmin owner with locking ring
Power input type	DC
Power supply type	DC
Facteur de forme du produit	Black box
Product Registration Url	http://my.garmin.com
Product SKU	010-00957-00
Détail du type de produit	Black box fishfinder module
Public Safety Distance	20
Release year	2014.0
Rf Exposure Safe Distance Cm	20
Safety Manual Reference	Important Safety and Product Information guide
Safety Warning General	The user is responsible for the safe and prudent navigation of their vessel. The device is a navigation aid and does not absolve the operator of the responsibility to operate the vessel safely.
Screen size	N/A (screenless module)
Software Update Memory Card Type	SD
Software update method	Via SD memory card
Software Update Url	www.garmin.com/support/software/marine.html
Sonar Ports Count	1
Fishfinder RMS power	25-2000
Sonar Type	Traditional
Status Led Indication Details	Green slow blinking (normal operation), Red slow blinking (not connected/standby), Red/Green slow blinking (test mode), Red fast blinking (system error), Red solid (hardware failure)
Storage temperature range	-15 to 70
Track capacity	Not applicable, depends on the connected chartplotter
Transducer Compatibility	Garmin differential 8-pin depth transducers
Transducer Extension Cable Available	Yes
Transducer material	N/A (fishfinder module, not a transducer)
Ukca compliant	Yes
Ukca Declaration Of Conformity Url	garmin.com/compliance
User level	Advanced
Vendor	Garmin
Ventilation required	Yes
Temperature measurement range	Depends on the transducer
Wired input	Transducer (8-pin XDCR port)
Wired output	Garmin Marine Network

Detailed description

The Garmin GSD™ 24 Advanced Sonar Module is a "black box" sonar solution designed to enhance the underwater detection capabilities of compatible Garmin multifunction displays. This module integrates into the Garmin marine network, delivering superior detection performance for deep-sea fishing and navigation requiring precise seabed knowledge. It serves as a powerful alternative to mid-range chartplotter integrated transducers, providing increased output power and depth.

Advanced Sonar Performance and Network Connectivity

The GSD™ 24 delivers robust output power, adjustable from 25 to 2,000 W RMS depending on the connected transducer. It operates on traditional frequencies of 50/200 kHz, enabling maximum depths of 1,512 meters (5,000 feet). This depth and power capability sets it apart from less powerful sonar modules, making it ideal for deep waters. Integration into the Garmin marine network allows multiple compatible displays to share sonar data in real time, optimizing display flexibility and system redundancy onboard.

Industrial Design and System Integration

With dimensions of 204 x 283 x 81 mm and a weight of 2.39 kg, the Garmin GSD™ 24 is built to withstand demanding marine environments. Its housing is fully watertight, made of aluminum and steel, and compliant with IEC 60529 IPX7 standard, ensuring resistance to accidental immersion up to 1 meter for 30 minutes. It operates within an extended temperature range of -15 to 70°C, ensuring operational reliability in various climatic conditions. Power input requires 10 to 35 V with a maximum consumption of 40 W and a 7.5 A fuse. A safety distance of 40 cm from the compass is recommended to avoid interference. The module is supplied with mounting hardware and locking rings for secure installation.

Expert opinion

Pol CONIN

Digital Manager

« Technical analysis of the Garmin GSD™ 24 fishfinder module »

The Garmin GSD™ 24 sonar module is a strategic upgrade for any Garmin navigation system requiring high-performance traditional sonar capabilities. Its "black box" design extends power and detection depth far beyond the built-in transducers of multifunction displays, making it essential for offshore fishing or deep-water navigation. With an RMS power output of up to 2,000 W and a detection capability of up to 1,512 meters, it delivers superior resolution and clarity for identifying structures and fish schools.

The module’s robustness is ensured by its aluminum and steel housing, compliant with IPX7 standards, and its wide operating temperature range (-15 to 70°C). Its seamless integration into the Garmin marine network enables sonar data sharing across all compatible displays, providing valuable display flexibility. For installations, it is essential to select a transducer compatible with the GSD™ 24’s power output to fully utilize its capabilities. Installation, while requiring connection to the network, power supply, and transducer, follows standard procedures for this type of module and is well documented by Garmin.

Durabilité

Facilité d'installation

Rapport performance / prix

Payment and security

Your payment information and data are processed securely.

Garmin GSD™ 24 Advanced Sonar Module

£424.31 GBP

£424.31 GBP ~~£426.52 GBP~~

Frequently Asked Questions

Need help? Contact us

What is the Garmin GSD 24 Advanced Sonar Module?

The Garmin GSD™ 24 Advanced Sonar Module is a "black box" style depth sounder designed to enhance the underwater detection capabilities of compatible Garmin multifunction displays. It integrates into the Garmin marine network to deliver superior detection performance for deep-sea fishing and navigation requiring precise seabed awareness.

What are the maximum performance specifications of the GSD 24 in terms of power output and depth?

The GSD™ 24 delivers robust power output, adjustable from 25 to 2,000 W RMS, depending on the connected transducer. It can reach maximum depths of 1,512 meters (5,000 feet).

Which fishfinder frequencies does the GSD 24 use?

The Garmin GSD™ 24 operates on the traditional 50/200 kHz frequencies.

Is the GSD 24 compatible with CHIRP, ClearVü, or SideVü sounder technologies?

No, the Garmin GSD™ 24 is a traditional fishfinder module that operates on 50/200 kHz frequencies. It is not compatible with CHIRP, Garmin ClearVü™, or Garmin SideVü™ technologies.

Is the GSD 24 housing waterproof?

Yes, the Garmin GSD™ 24 housing is fully waterproof, made of aluminum and steel, and compliant with IEC 60529 IPX7. This means it can withstand accidental immersion in water up to 1 meter deep for 30 minutes.

What is the operating temperature range of the GSD 24?

The Garmin GSD™ 24 is designed to operate within a temperature range of -15°C to 70°C (5°F to 158°F).

What is the required power supply for the GSD 24?

The Garmin GSD™ 24 module requires a 10 to 35 V DC power supply. It draws a maximum of 40 W and must be protected by a 7.5 A fuse.

What tools are required for installing the Garmin GSD 24?

For installation of the GSD™ 24, you will need the following tools:

A drillA 5 mm (no. 8) drill bit for the mounting surfaceA 32 mm (1 1/4 in.) flat bit or hole saw for the mounting surface (if required for cable pass-through)A no. 2 Phillips screwdriverA 3 mm flathead screwdriverCable ties (optional)Wire cuttersWire strippersMarine sealant (optional)

What considerations apply when choosing where to mount the GSD 24?

When selecting a mounting location, ensure the GSD™ 24:

Is not submerged.Has adequate ventilation and is not exposed to extreme temperatures.Is mounted so its LEDs are visible.Allows easy connection of power, network, and transducer cables.

How to connect the GSD 24 to the Garmin marine network?

The GSD™ 24 connects to the Garmin marine network via an Ethernet cable. If your boat is equipped with a GMS 10 network port expander, connect the Ethernet cable to an available port on the GMS 10. Otherwise, connect the Ethernet cable directly to the network port of your compatible Garmin chartplotter.

How to connect the GSD 24 to the boat's power source?

Connect the stripped end of the GSD™ 24 power cable to a 12 Vdc power source and ground. Ensure the inline fuse holder is not removed and that the appropriate 7.5 A fuse is installed. Align the power cable notch with the device's power port and insert the cable, then tighten the locking ring.

How to update the GSD 24 software?

To update the GSD™ 24 software, you must copy the software update to a memory card. Insert the memory card into the card reader of your compatible Garmin chartplotter after it has fully booted. Then follow the on-screen instructions. Once the update is complete, remove the memory card.

Is it recommended to print a mounting template for the GSD 24?

No, it is strongly discouraged to print your own mounting template. It is recommended to use the template provided in the product box. If you must print a template, it is crucial to follow precise instructions regarding paper size and printer settings to avoid incorrect cutting on your boat's mounting surface.

What is the minimum safe distance to maintain between the GSD 24 and a magnetic compass?

Mount the Garmin GSD™ 24 at a minimum distance of 40 cm (15.75 in.) from a magnetic compass to prevent interference.

With which Garmin multifunction displays is the GSD 24 compatible?

The Garmin GSD™ 24 is compatible with Garmin multifunction displays and chartplotters equipped with a Garmin Marine Network port (Ethernet). Exact compatibility depends on the specific chartplotter model and its software updates.

Which types of transducers are compatible with the GSD 24?

The GSD™ 24 is designed to work with traditional Garmin or Airmar transducers of 50/200 kHz type. The output power (25 to 2000 W RMS) will depend on the specific transducer connected.

Do I need an adapter to connect my transducer to the GSD 24?

Yes, if your transducer is a non-differential 6-pin model (Garmin or Airmar), you will need an 8-pin transducer adapter box to connect it to the GSD™ 24. Differential 8-pin Garmin transducers connect directly to the 8-pin sounder module port.

Can I connect a separate speed or temperature sensor to the GSD 24 via the adapter?

Yes, if you use the 8-pin transducer adapter box for a non-differential transducer, you can connect a separate temperature sensor or a separate water speed paddlewheel sensor via the nuts provided on the adapter housing. Specific connections are available on the adapter's internal terminal block.