Kit de connecteur sur cloison LiveScope™ - Garmin

Kit de connecteur sur cloison LiveScope™ - visuel officiel Garmin 2

Free pickup point from €150 in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

thanks to our network of approved installers

Find an installer

Support service

Opt for additional installation assistance

Save 23%

Garmin

010-13350-00

LiveScope™ Garmin bulkhead connector kit

The Garmin LiveScope™ through-hull connector kit (010-13350-00) is designed for flush-mounting the LiveScope™ extension cable, allowing quick connection and disconnection of the transducer. Ideal for LiveScope™ Plus and XR systems, it requires a 37 mm hole and 60 mm clearance. The kit includes a snap-in base, cover, weather-resistant cap, and all mounting hardware.

Retail priceBenefit from the professional rate

£28.17 GBP

£28.17 GBP ~~£36.83 GBP~~

Shipping calculated at checkout.

In stock

Free pickup point from €150 in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

thanks to our network of approved installers

Find an installer

Support service

Opt for additional installation assistance

Technical specifications

Connector type	Garmin Owner
Cable type	Garmin LiveScope owner
Cable length	0.0
Compatible network	Garmin LiveScope owner
Wired network	Garmin LiveScope owner
Product type	Bulkhead connector kit
Compatible models	LiveScope, LiveScope Plus, LiveScope XR, LiveScope Plus LVS34, LiveScope XR LVS62
Australian Consumer Law Compliance	Yes
Behind Panel Clearance Required Mm	60
Connector Holder Design	In two halves, with tension relief ribs
Copyright Year	2023
Finish Plate Alignment Feature	Garmin logo for orientation, weather cap attachment strip for alignment in the groove
Diamètre de la scie cloche	37
Précaution de perçage lors de l'installation	Check the backside of the surface; do not drill deeper than the surface thickness
Installation Environment Detail	For boats requiring frequent handling or a discreet installation.
Installation Permanence Note	Avoid permanent sealant for temporary installations
Installation Safety Gear Required	Safety glasses, hearing protection, dust mask
Installation Screwdriver Type	Phillips
Marine Sealant Optional Use	Yes
Mounting Method Conflict Warning	Do not use the mounting nut and mounting screws simultaneously to avoid damaging the product.
Taille des vis de montage (métrique)	8, 20
Mounting Template Use Method	Use the connector bracket as a template to mark the holes
Mounting type	Flush-mounted
Package contents	Bulkhead connector, self-adhesive gasket, mounting nut, mounting screw, finish plate, weather cap tie, weather cap, fixing screw
Pilot Hole Drilling Restriction	Do not drill pilot holes through the connector bracket
Diamètre foret trou pilote	2.7
Product use	To facilitate quick connection and disconnection of LiveScope transducers for a clean and discreet installation.
Release year	2023
Transducer Extension Cable Availability	Yes
User level	Intermediate
URL d'informations sur la garantie	garmin.com/support/warranty

Detailed description

Designed for clean and functional integration, the Garmin LiveScope™ bulkhead connector kit (part number 010-13350-00) allows flush mounting of the extension cable for your LiveScope™ system. This solution enables quick connection and disconnection of the transducer, optimizing use for boats requiring frequent handling or discrete installation. This kit is compatible with the entire LiveScope™ range, including LiveScope™ Plus LVS34, LiveScope™ Plus, LiveScope™ XR LVS62, and LiveScope™ XR systems.

Installation and compatibility

Installing the Garmin bulkhead connector kit requires a minimum clearance of 60 mm behind the mounting surface and the use of a 37 mm hole saw for cable passage. For secure attachment, the kit uses 8 mm screws to assemble the support halves. If access behind the mounting surface is limited, 20 mm screws are used to secure the connector bracket. In this case, 2.7 mm pilot holes are required. This installation approach ensures a secure and durable integration, similar to the mounting standards of other Garmin accessories such as transducer mounts or NMEA 2000 through-hull fittings.

Kit contents

The 010-13350-00 kit includes a snap-in base, a finishing cover, a weather-resistant cap to protect the connector when not in use, and all necessary mounting components. It is essential to note that the LiveScope™ extension cable is not included and must be purchased separately, with available lengths of 1 m, 3 m, or 9 m, allowing installation flexibility based on the vessel's configuration and the position of the sonar module.

Documentation

Type	Nom
	Installation instructions - LiveScope bulkhead connector kit installation instructions (EN)

Expert opinion

Pol CONIN

Digital Manager

« LiveScope™ integration optimization: Garmin bulkhead connector »

Integrating a LiveScope™ system on board a vessel often faces installation constraints, especially for users who frequently remove their transducer or want a clean finish. The Garmin LiveScope™ bulkhead connector kit precisely meets this need by providing a dedicated cable pass-through solution. Instead of leaving a cable dangling or running it through a simple hole, this connector ensures a clean, protected termination, essential for cable longevity and connection reliability in a marine environment.

This component is particularly relevant for sport fishing boats or pleasure craft where space is a key factor. It allows, for example, quick disconnection of the LiveScope™ transducer for trailer transport, winter storage, or securing it when not in use on board. Installation requires careful preparation, including drilling a 37 mm hole, but the mounting options (rear nut or screw) offer flexibility depending on the bulkhead accessibility. It is essential to ensure 60 mm of clearance behind the mounting surface to guarantee a compliant and functional installation.

Compared to generic cable glands, this Garmin kit is specifically designed for LiveScope™ connectors, ensuring perfect watertightness and compatibility. It is a minor investment that optimizes the use and protection of a high-value sonar system, avoiding damage risks from repeated handling or excessive connector exposure. It perfectly complements any LiveScope™ installation, whether for Plus or XR versions.

Durabilité

Facilité d'installation

Rapport performance / prix

Payment and security

Your payment information and data are processed securely.

LiveScope™ Garmin bulkhead connector kit

£28.17 GBP

£28.17 GBP ~~£36.83 GBP~~

Frequently Asked Questions

Need help? Contact us

What is the Garmin LiveScope™ through-hull connector kit?

The Garmin LiveScope™ through-hull connector kit (part number 010-13350-00) is an accessory designed to enable clean and functional integration of the extension cable for your LiveScope™ system. It provides a flush-mounted solution for connecting and disconnecting your transducer quickly.

What are the benefits of using the LiveScope™ through-hull connector kit?

This kit provides several benefits:

Clean and discreet integration of the transducer extension cable.Quick connection and disconnection of the transducer, ideal for boats requiring frequent handling.Optimized space usage and reduced cable clutter on deck.

What is included in the LiveScope™ through-hull connector kit?

The kit includes all components required for installing the through-hull connector, such as the connector halves, 8 mm and 20 mm screws, a self-adhesive gasket, a mounting nut, a trim plate, and a protective cap.

Is the LiveScope™ through-hull connector kit waterproof?

Yes, the kit is designed for an installation that can be made watertight. It is recommended to apply marine sealant in the groove of both halves of the connector bracket during assembly to prevent water ingress and create a seal with the extension cable connector.

Is the LiveScope™ through-hull connector kit designed for permanent or temporary installation?

The kit can be used for permanent or temporary installation. If the installation is temporary, it is advisable to avoid using permanent marine sealant to facilitate future removal.

Which Garmin LiveScope™ systems is this kit compatible with?

This kit is compatible with the entire Garmin LiveScope™ range, specifically including the following systems:

LiveScope™ Plus LVS34LiveScope™ PlusLiveScope™ XR LVS62LiveScope™ XR

Is this kit compatible with other Garmin transducers than LiveScope™?

The bulkhead connector kit is specifically designed for Garmin LiveScope™ systems and their extension cables. It is not stated to be compatible with other types of Garmin transducers.

Do I need a LiveScope™ transducer extension cable with this kit?

Yes, this kit is designed for flush-mounting the extension cable of your LiveScope™ system. You will therefore need a LiveScope™ transducer extension cable of the appropriate length, available from your Garmin dealer.

Which tools are required to install the LiveScope™ connector kit on a bulkhead?

For the basic installation, you will need the following tools:

A drillA 37 mm (1 1/2 in) hole sawA Phillips #1 bit or screwdriverMarine sealant (optional)

If you do not have access to the space behind the mounting surface, you will also need a 2.7 mm (3/32 in) drill bit and a Phillips #2 bit or screwdriver.

What is the size of the hole to drill for installing the connector through the bulkhead?

You must drill a cable pass-through hole with a diameter of 37 mm (1 1/2 in) using a hole saw.

What is the required clearance behind the mounting surface for this kit?

You must allow a minimum clearance of at least 60 mm (2 12/32 in) behind the mounting surface to ensure proper installation of the kit.

How to secure the connector if I don't have access behind the mounting surface?

If you don't have access to the space behind the mounting surface, you will need to secure the connector bracket using the included mounting screws. To do this:

Mark the locations of the four mounting holes using the connector bracket as a template.Remove the connector bracket from the bulkhead.Drill pilot holes for the four mounting screws using a 2.7 mm (3/32 in) drill bit.Secure the connector bracket to the mounting surface using the included 20 mm (25/32 in) screws with a Phillips #2 screwdriver.

Which screws are used to assemble the two halves of the connector bracket?

The two halves of the connector bracket are assembled together using the included 8 mm (5/16 in) screws, with a Phillips #1 screwdriver.

Which screws are used to secure the connector bracket when access is limited?

If you do not have access to the space behind the mounting surface, the connector bracket is secured to the surface using the included 20 mm (25/32 in) screws.

Should marine sealant be used when installing the kit?

Using marine sealant is optional. However, if you want to prevent water ingress through the connector mount, it is recommended to apply marine sealant in the groove of both halves of the connector mount to create a seal.

Can I use both the mounting nut and the mounting screws to secure the connector?

No, you must not use both the mounting nut and the mounting screws to secure the connector. Attempting to use both methods simultaneously may damage the product. Choose one method or the other based on your access behind the mounting surface.

How to install the finishing plate and protective cap?

To install the finishing plate and protective cap:

Place the retaining ring of the protective cap around the connector, with the cap facing downward.Snap the finishing plate onto the connector bracket, ensuring the Garmin logo is oriented upward.Make sure the securing strap of the protective cap aligns with the groove at the bottom of the finishing plate.

Are there any precautions to take when drilling pilot holes in fiberglass?

Yes, if you are mounting the device in fiberglass, it is recommended to use a countersink bit to drill a relief counterbore through the top gelcoat layer only. This prevents cracking of the gelcoat when the screws are tightened.

How to orient the connector and bracket during assembly?

During assembly, the front of the connector bracket must slide into the groove around the connector. The rear of the connector bracket must fully slide between the strain relief ribs on the connector for correct alignment.