MotorGuide® Trolling Motor Transducer Adapter (4-pin) - Garmin image 1

Free pickup point from €150 in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

thanks to our network of approved installers

Find an installer

Support service

Opt for additional installation assistance

Save 18%

Garmin

010-11979-00

MotorGuide® transducer adapter for electric motor, 4-pin

Designed to connect Garmin 4-pin fishfinder/GPS combos to MotorGuide electric motor integrated transducers, this adapter (010-11979-00) enables direct sonar reception. The 1.8-meter cable, with robust marine-grade construction, ensures reliable integration. The included product is the MotorGuide (4-pin) transducer adapter for Garmin.

Retail priceBenefit from the professional rate

£20.67 GBP

£20.67 GBP ~~£25.20 GBP~~

Shipping calculated at checkout.

Prices exclude import taxes (indicative rate: UK import VAT 20%). DAP delivery: import taxes are paid on delivery.

In stock

Free pickup point from €150 in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

thanks to our network of approved installers

Find an installer

Support service

Opt for additional installation assistance

Technical specifications

Supported sonar technologies	Traditional 2D fishfinder, ClearVü
Mounting type	Wired connection
Sonar connector type	4 pins
Cable length	1.8
Integrated temperature sensor	No
Integrated speed sensor	No
Compatible displays	Garmin ECHOMAP™ Plus series (42cv, 43cv, 44cv, 45cv, 62cv, 63cv, 64cv, 65cv), ECHOMAP™ UHD 6x series (62cv, 63cv, 64cv, 65cv), STRIKER™ series (STRIKER™ 4, STRIKER™ Plus 4, STRIKER™ Vivid 4cv, 5cv, 7cv, 7sv, 9sv), echo™ and echoMAP™ Chirp 4x/5x
IP rating	IPX7
Fishing type	Freshwater fishing, Trolling
Fonction de l'adaptateur	Connecting electric motor depth sounder to Garmin display
Compatible Transducer Type	MotorGuide integrated transducers
Compatible Trolling Motor Models	MotorGuide electric motors with integrated transducer
Connector A type	Garmin 4-pin
Connector B type	MotorGuide
Warranty	1.0
Weight	0.1

Detailed description

The Garmin MotorGuide® transducer adapter (4-pin), part number 010-11979-00, is designed to establish a reliable connection between Garmin sounder/GPS combos and the transducers integrated into MotorGuide electric trolling motors. This accessory allows Garmin units to receive sonar data directly from the motor’s transducer, optimizing underwater information display and accuracy.

Connectivity and compatibility

Featuring a 4-pin design and a cable length of approximately 1.8 meters (6 feet), this adapter ensures direct electrical integration. It is compatible with a selection of Garmin chartplotters and fishfinders equipped with a 4-pin transducer port, including the ECHOMAP™ Plus series (such as 42cv, 43cv, 44cv, 45cv, 62cv, 63cv, 64cv, 65cv), ECHOMAP™ UHD 6x (62cv, 63cv, 64cv, 65cv), and STRIKER™ series (STRIKER™ 4, STRIKER™ Plus 4, STRIKER™ Vivid 4cv, 5cv, 7cv, 7sv, 9sv), as well as the echo™ and echoMAP™ Chirp 4x/5x series. This broad compatibility covers a significant portion of Garmin equipment designed for fishing.

MotorGuide integration

The adapter is specifically engineered to work with the integrated transducers of MotorGuide electric trolling motors. It supports various MotorGuide series, including MotorGuide Tour - Sonar (models TR75L, TR82L, TR109L), MotorGuide Wireless Sonar (models W55L, W75L), and MotorGuide Xi5 (models Xi5-55FW, Xi5-80FW, Xi5-105FW). Its robust marine-grade construction ensures durability in a nautical environment. Unlike generic solutions, this adapter provides stable data transmission compliant with the specifications of both brands.

Expert opinion

« Garmin and MotorGuide sonar integration: the 4-pin adapter »

This adapter is a key component for anglers equipped with both a Garmin 4-pin fishfinder and a MotorGuide electric trolling motor with an integrated transducer. Instead of installing an external Garmin transducer on the transom or motor, this cable centralizes sonar data via the MotorGuide’s existing transducer. This simplifies installation, reduces clutter, and protects the transducer from potential shocks, as it is already integrated and often better shielded within the motor body.

Its value lies in the synergy of the equipment: there is no need to duplicate transducers or manage conflicting signals. The 1.8-meter length is typically sufficient for most installations on fishing boats, allowing the motor to be connected to the console without major constraints. It is essential to verify the exact compatibility of your Garmin fishfinder model (ECHOMAP or STRIKER series with a 4-pin port) and your MotorGuide motor model to ensure flawless integration. Using this specific Garmin adapter ensures optimal signal transmission, avoiding quality loss or interference that could occur with non-adapted cables or improvised solutions.

Durabilité

Facilité d'installation

Rapport performance / prix

Payment and security

Your payment information and data are processed securely.

MotorGuide® transducer adapter for electric motor, 4-pin

£20.67 GBP

£20.67 GBP ~~£25.20 GBP~~

Frequently Asked Questions

Need help? Contact us

What is the MotorGuide® (4-pin) Garmin transducer adapter used for?

This adapter is designed to establish a reliable connection between Garmin fishfinder/GPS combos and the integrated transducers in MotorGuide electric trolling motors. It allows your Garmin device to directly receive sonar data from the motor’s transducer, optimizing underwater data display and accuracy.

Which Garmin devices is this adapter compatible with?

The adapter is compatible with a selection of Garmin chartplotters and fishfinders equipped with a 4-pin transducer port. This includes the following series:

ECHOMAP™ Plus: 42cv, 43cv, 44cv, 45cv, 62cv, 63cv, 64cv, 65cv
ECHOMAP™ UHD 6x: 62cv, 63cv, 64cv, 65cv
STRIKER™: STRIKER™ 4, STRIKER™ Plus 4, STRIKER™ Vivid 4cv, 5cv, 7cv, 7sv, 9sv
the echo™ and echoMAP™ Chirp 4x/5x series

Which MotorGuide motor types are compatible with this adapter?

This adapter is specifically designed to work with the integrated transducers of MotorGuide electric trolling motors. It supports various MotorGuide motor series equipped with this integrated transducer technology.

What is the length of the cable for this adapter?

The length of this adapter's cable is approximately 1.8 meters (about 6 feet), allowing for direct and flexible electrical integration.

Is the adapter available with other pin configurations?

No, this adapter is specifically designed with a 4-pin configuration. It is intended for Garmin devices and MotorGuide transducers that use this type of connector.

Is the installation of this adapter complicated?

The adapter is designed for direct electrical integration. While correct installation requires following the instructions provided with your Garmin and MotorGuide equipment, the connection itself is generally straightforward, linking the engine transducer to the Garmin device via the 4-pin port.

Why do I need an adapter to connect my Garmin fishfinder to my MotorGuide motor?

You need this adapter because the connectors on MotorGuide integrated motor transducers and those on Garmin fishfinder/GPS combos are not directly compatible. This adapter acts as an interface to ensure correct electrical connection and sonar data transfer.

What type of data is transmitted via this adapter?

This adapter enables the transmission of sonar data from the integrated transducer of your MotorGuide engine to your Garmin fishfinder/GPS display. This includes the data required to display the seabed and underwater structures.

Is the adapter compatible with Garmin ECHOMAP UHD series 9x devices?

The adapter is compatible with the ECHOMAP™ UHD 6x series (models 62cv, 63cv, 64cv, 65cv) and the STRIKER™ Vivid 9sv, as well as other Garmin models listed with a 4-pin transducer port. ECHOMAP UHD 9x series devices are not specifically listed as compatible with this 4-pin adapter.

What does this adapter package contain?

The package contains the MotorGuide® (4-pin) Garmin transducer adapter (reference 010-11979-00) itself, ready for connection.

Can I use this adapter with fishfinders from other brands than Garmin?

No, this adapter is specifically designed to establish a reliable connection between Garmin fishfinder/GPS units and the transducers integrated into MotorGuide electric trolling motors. It is not compatible with fishfinders from other brands.

Does this adapter work with a MotorGuide transducer that is not integrated into the motor?

No, this adapter is specifically designed to work with the built-in transducers of MotorGuide electric trolling motors. It is not intended for external or non-integrated transducers.

What are the benefits of using this adapter?

Using this adapter allows your Garmin device to receive sonar data directly from the integrated transducer of your MotorGuide engine. This optimizes underwater information display and accuracy without requiring the installation of a separate Garmin transducer on the engine.

Is this adapter water-resistant or waterproof?

Like all marine accessories of this type, the adapter is designed to withstand marine environmental conditions. Although it is not specified as "waterproof" in the strictest sense, it is built to operate reliably in damp and salty environments.

Does the adapter require a separate power supply?

No, the adapter is a passive accessory that facilitates the connection and data transmission between the MotorGuide engine transducer and the Garmin display. It does not require a separate power supply; it draws power and transmits data via the 4-pin connection.

Can I use this adapter if my Garmin device has an 8- or 12-pin transducer port?

No, this adapter is specifically designed for Garmin devices with a 4-pin transducer port. It is not compatible with 8-pin or 12-pin ports. Using an incorrect adapter could damage the equipment.

What does "cv" mean in Garmin model names, such as ECHOMAP Plus 42cv?

The "cv" in Garmin model names such as ECHOMAP™ Plus 42cv or ECHOMAP™ UHD 62cv indicates that the unit is equipped with ClearVü technology. This sonar technology provides near-photographic images of what lies beneath your boat.

What does "sv" stand for in Garmin model names, such as STRIKER Vivid 7sv?

The "sv" in Garmin model names such as STRIKER™ Vivid 7sv or 9sv indicates that the unit is equipped with SideVü and ClearVü technologies. SideVü provides a detailed side view of structures and fish, while ClearVü delivers a near-photographic image beneath the boat.

Is it possible to extend the cable of the adapter?

Extending transducer or adapter cables is generally not recommended as it can cause signal loss or interference, affecting sonar data quality. It is advised to use the provided cable length (1.8 meters) or consult Garmin's specifications for approved extension solutions if necessary.