HP 10-blade neoprene impeller

This impeller is made of HP neoprene, a flexible and durable material suitable for marine environments.

This Jabsco impeller has 10 blades, designed for efficient pumping.

The main dimensions of this impeller are:

Ø A (shaft diameter): 8 mmØ B (outer diameter): 40 mmC (width/thickness): 19 mmHub type: 1

The manufacturer reference for this Jabsco impeller is 9200-0021B.

This impeller is designed for various marine pumping applications, including engine cooling systems, bilge pumps, transfer pumps, and general-purpose pumps.

Yes, the HP neoprene used offers resistance to small amounts of oil or diesel fuel, making it versatile for various uses.

Yes, this impeller is suitable for use with fresh water and seawater.

Yes, this flexible impeller includes a brass insert for reliable mounting on the pump shaft.

To verify compatibility, it is essential to compare the manufacturer reference (9200-0021B) and the dimensions of this impeller with the specifications of the original impeller of your pump or the Jabsco pump manual.

The "Hub: 1" refers to the type of connection for the impeller shaft. It indicates the specific configuration of the central orifice that matches your pump shaft. It is important to ensure this hub type corresponds to that of your pump.

This impeller is specifically designed as a spare part for Jabsco pumps using reference 9200-0021B. While dimensions may sometimes match other brands, compatibility is not guaranteed. Always refer to your pump manufacturer's specifications.

To replace an impeller, you will generally need basic tools such as a screwdriver, pliers, and potentially an impeller puller if the old one is difficult to remove.

Yes, it is strongly recommended to lubricate the impeller with glycerin, silicone grease, or a suitable water-based lubricant before installation. This makes insertion easier and extends the impeller's lifespan by reducing initial friction.

Here are the general steps to install a new impeller:

1. Power off the pump.
2. Remove the pump cover and the old impeller.
3. Clean the impeller housing thoroughly.
4. Lubricate the new impeller and its housing.
5. Insert the new impeller while slightly turning it in the pump's rotation direction so the blades align correctly.
6. Reinstall the pump cover.

The impeller is the core component of a seawater or cooling water pump. Its flexible blades spin rapidly to create suction and discharge water, ensuring the necessary flow for engine cooling or fluid transfer.

Neoprene offers excellent flexibility, allowing the impeller to adapt to pressure variations and maintain a constant flow. It is also resistant to abrasion, seawater, and certain chemicals, thereby extending its lifespan in a marine environment.

Yes, this Jabsco impeller is covered by the manufacturer's standard warranty. For any specific warranty questions, please refer to Jabsco's general terms and conditions.

This Jabsco high-pressure neoprene impeller, manufacturer reference 9200-0021B, has the following dimensions:

Shaft diameter (Ø A): 8 mmOuter diameter (Ø B): 40 mmWidth (C): 19 mmIt features 10 blades and includes a brass insert.