Mac Plus 48/12-50 DC-DC Converter Charger
In stock
Technical specifications
Technical specifications
| IP rating | IP23 |
| Marine-ready | Oui |
| Operating temperature range | -20 to +60 |
| Cooling method | Natural convection |
| Mounting type | Wall mount |
| Weight | 0.0 |
| Wired network | MasterBus, CZone |
| Wired input | Screw terminal block |
| Wired output | Screw terminal block |
| Nominal input voltage | 48.0 |
| Input voltage range | 36-48 |
| Nominal output voltage | 12.0 |
| Continuous power at 25°C | 600.0 |
| Continuous output power (40°C) | 480.0 |
| Peak power | 600.0 |
| Max efficiency | 92.0 |
| Remote on/off support | Oui |
| Short-circuit protection | Oui |
| Overload protection | Oui |
| Recommended fuse rating | 80.0 |
| Broches du connecteur accessoire | 6 |
| Capteur de température de batterie inclus | Yes |
| Fonctionnement bidirectionnel | Yes |
| Type de profil de charge | 3 steps + |
| Topologie du convertisseur | Bidirectional DC-DC converter |
| Support réseau CZone | Yes |
| Seuil de température de déclassement | 40 |
| Configuration par DIP switch | Yes |
| Rendement énergétique | 90.0 |
| Assistance batterie à plat | Yes |
| Tension d'isolation galvanique | 0.0 |
| Indicateurs LED d'état | 2 |
| Marine grade | Oui |
| Câble de dérivation Mastervolt-CZone inclus | Yes |
| Support réseau MasterBus | Yes |
| Masterbus terminator inclus | Yes |
| Mise à la terre négative requise | Yes |
| Max operating temperature | 60 |
| Min operating temperature | -20 |
| Courant de sortie | 50.0 |
| Max output power | 600.0 |
| Tension de sortie | 12.0 |
| Protection contre la surchauffe | Oui |
| Protection contre les surtensions | Oui |
| Type de conversion d'énergie | DC-DC |
| Mode d'alimentation | Yes |
| Produit manual inclus | Yes |
| Section de câble recommandée (côté haut) | 6 |
| Section de câble recommandée (côté bas) | 16 |
| Entrée pour interrupteur à distance | Yes |
| Suivi par numéro de série | Yes |
| Compensation de chute de tension | Yes |
Detailed description
Detailed description
The Mastervolt Mac Plus 48/12-50 is a bidirectional DC-DC converter charger designed for 48V electrical systems on board. It converts 48V battery voltage to a stabilized 12V output at 50A, bridging the gap between high-voltage battery banks and 12V on-board equipment. Its bidirectional functionality, controllable via a MasterBus network, CZone circuit, or remote switch, allows reversing the power flow to charge a 48V service battery or a 12V starter battery.
Performance and system integration
This model, the most powerful in the Mac Plus 48V range with 50A output, differs from the Mac Plus 48/24-30 (30A) and Mac Plus 24/48-15 (15A) by its ability to power high 12V loads. It can operate as a three-stage battery charger or as a stabilized DC power supply, offering maximum flexibility. Integration with a MasterBus or CZone network enables real-time monitoring (voltages, currents, alarms) and advanced configuration via events. Compared to simpler solutions like a basic DC-DC converter, the Mac Plus provides precise regulation, voltage drop compensation, and a battery temperature probe to optimize charging and extend battery life.
Installation and robustness
With an IP23 protection rating, the Mac Plus is designed for humid environments but must be installed protected from direct spray. Its robust design includes protection against polarity reversal, short circuits, and overheating. Installation requires minimum cable cross-sections of 6 mm² (high side) and 16 mm² (low side) for the 48/12-50 model. It is supplied with a battery temperature probe, a Mastervolt-CZone connection cable, and a MasterBus terminator.
Expert opinion
Expert opinion
Pol CONIN
Digital Manager
« The bridge between 48V and 12V, powerful and intelligent »
Your payment information and data are processed securely.

