Free pickup point from €150 in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

thanks to our network of approved installers

Find an installer

Support service

Opt for additional installation assistance

ObsolèteSold out

Navico

000-11148-001

OBSOLETE - ZG100 Antenna Mount

The Navico antenna mount (ref. 000-11148-001) is an official spare part designed for mounting B&G ZG100 and Simrad GS25 GPS/compass antennas. It allows for rigid surface or standard pole mounting, essential for maintaining the accuracy of 10 Hz heading and position data. This product includes only the replacement mounting base for these two specific models.

Retail priceBenefit from the professional rate

£21.37 GBP

£21.37 GBP ~~£26.52 GBP~~

Shipping calculated at checkout.

Low stock

Free pickup point from €150 in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

thanks to our network of approved installers

Find an installer

Support service

Opt for additional installation assistance

Technical specifications

Color	White
Compatible models	B&G ZG100, Simrad GS25, Lowrance Point-1
Finish	Matte
Installation type	Screwed
Kit contents	Mounting bracket, Screws
Material	Marine-grade plastic
Mounting type	Surface mount, Pole mount
Product type	Mounting bracket
Weight	0.072

Detailed description

The 000-11148-001 antenna bracket is an original Navico installation and replacement part, specifically developed for B&G ZG100 GPS and compass antennas as well as their Simrad GS25 equivalent. This mechanical component is essential for ensuring a rigid mounting of your navigation sensor, a prerequisite for utilizing the high precision of attitude and positioning data.

Design adapted for high-frequency sensors

The ZG100 and GS25 antennas integrate a 32-channel GPS/GLONASS receiver coupled with an electronic compass, delivering position updates at 10 Hz and heading accuracy of +/- 3°. For the autopilot and NMEA 2000 instruments to receive reliable information regarding rate of turn and roll/pitch (accurate to +/- 1°), the antenna must not be subjected to any parasitic vibrations. This official bracket eliminates mechanical play that could be found with generic mounts, thus guaranteeing absolute stability of the sensor, even in rough seas.

Mounting options and integration

Weighing only 72 grams, this bracket respects the compact format of the antenna (90 mm diameter). It is designed to offer total installation flexibility on the deck or the vessel's gantry. Its structure allows for both flush mounting for discreet integration, or mounting on a standard mast (pole mount) to raise the antenna and optimize satellite acquisition by clearing the line of sight. This is the exact replacement part supplied when initially purchasing the ZG100 and GS25 antennas.

Documentation

Type	Nom
	EN - Installation Guide - ZG100 Antenna Mount

Expert opinion

Pol CONIN

Digital Manager

« The essential base for optimal heading accuracy »

A quality antenna mount is fundamental when using a GPS/compass combo sensor like the ZG100 or GS25. These antennas deliver heading data with an accuracy of +/- 3° and a 10 Hz refresh rate, so the slightest vibration or play in the mounting can introduce calculation errors for the autopilot. This genuine Navico mount guarantees absolute rigidity, whether for surface mounting or on a standard mast, thus ensuring faithful transmission of attitude data (roll/pitch +/- 1°) over the NMEA 2000 network.

Durabilité

Facilité d'installation

Rapport performance / prix

Payment and security

Your payment information and data are processed securely.

OBSOLETE - ZG100 Antenna Mount

£21.37 GBP

£21.37 GBP ~~£26.52 GBP~~

Frequently Asked Questions

Need help? Contact us

What antennas are compatible with this mount?

This mount is specifically designed as an original part for the following GPS and compass antennas:

B&G ZG100Simrad GS25It ensures a perfect fit for these models.

Can I use this mount for my Lowrance Point-1 antenna?

Yes, although primarily marketed for the B&G ZG100 and Simrad GS25 models, this mount is also compatible with the Lowrance Point-1 antenna, as these three models share the same base and mounting format.

Is it possible to use this mount for an antenna from another brand like Garmin or Raymarine?

No, this is not recommended. This mount is molded and designed precisely for the dimensions and mounting points of Navico antennas (B&G ZG100, Simrad GS25). Using an unsuitable mount would compromise the stability and accuracy of the antenna's data.

Is this mount an original manufacturer part?

Yes, this is an original Navico installation and replacement part. This guarantees a perfect fit and durability in line with the brand's standards.

What types of mounting are possible with this bracket?

This mount is versatile and allows for two types of installation on your vessel:

Flush mount: for discreet integration directly on the deck or roof.Pole mount: for installation on a standard antenna mast support to raise the antenna and optimize satellite reception.

Why is it so important to use this official mount for my antenna?

Using the official mount is crucial to ensure the absolute stability of your ZG100 or GS25 antenna. These sensors provide high-frequency data (10 Hz) on heading, rate of turn, roll, and pitch. Any vibration or mechanical play, common with generic mounts, can distort this data and degrade the performance of your autopilot and instruments.

Does the mount design take into account the antenna cable routing?

Yes, the mount is designed to allow for clean and protected routing of the antenna's NMEA 2000 cable, whether for flush or pole mounting, thus ensuring a tidy installation.

Is this mount identical to the one originally supplied with a new antenna?

Yes, absolutely. This is the exact replacement part that is supplied in the box when purchasing a new B&G ZG100 or Simrad GS25 antenna.

What is the manufacturer's part number for this product?

The manufacturer's part number (SKU or part number) for this antenna mount is 000-11148-001.

Are any special tools required to install this mount?

No, no special tools are required. Installation only requires basic tools such as a screwdriver and a drill for the mounting holes on your boat. The choice of drill bits and bits will depend on the screws you choose based on your mounting surface.

Is it possible to mount the antenna directly on the deck without this mount?

No, it is not possible to properly mount the ZG100 or GS25 antenna without this mount. The mount is the essential interface part that ensures stable and secure mechanical fixing between the antenna base and the boat's surface.

What is the main function of this antenna mount?

The main function of this mount is to ensure rigid and vibration-free attachment of the GPS/Compass antenna. This stability is essential for the sensor to provide extremely accurate navigation data (position, heading, attitude) to your instruments and autopilot.

Is the mount designed for mounting on a standard antenna mast?

Yes, the mount is designed for attachment to a standard marine antenna mast. This allows the antenna to be raised to clear the line of sight to the satellites, thereby improving GPS signal quality.

What are the dimensions of the antenna that this mount can accommodate?

This mount is designed for antennas with a base diameter of 90 mm (3.54 inches), which precisely matches the dimensions of the B&G ZG100 and Simrad GS25 models.

Is the color of the mount the same as the ZG100 and GS25 antennas?

Yes, the mount is white, matching the standard color of the B&G ZG100 and Simrad GS25 antennas for an aesthetic and discreet integration on your boat.