Cable Y adaptateur Raymarine A80493 Axiom RV 25 broches vers 9 et 7 broches

Free pickup point from €150 in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

thanks to our network of approved installers

Find an installer

Support service

Opt for additional installation assistance

Save 12%

Raymarine

A80493

Adapter cable (9 & 7-pin Y-cable to 25-pin) for DownVision and direct 600W Airmar transducers on AXIOM RV

The Raymarine A80493 adapter cable is designed to simultaneously connect a DownVision transducer (9-pin) and an Airmar 600W transducer (7-pin) to a single 25-pin port on Axiom RV displays. This is a system integration accessory for Axiom RV chartplotters, enabling dual transducer functionality without additional modules.

The included product is the Y-adapter cable (9 & 7-pin to 25-pin).

Retail priceBenefit from the professional rate

£85.54 GBP

£85.54 GBP ~~£97.24 GBP~~

Shipping calculated at checkout.

In stock

Free pickup point from €150 in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

thanks to our network of approved installers

Find an installer

Support service

Opt for additional installation assistance

Technical specifications

Connector type	Y-cable (9-pin, 7-pin to 25-pin)
Cable type	Adapter cable
Compatible network	Raymarine RealVision Sonar
Wired network	RealVision (Raymarine)
Operating temperature	-15°C to +55°C
Storage temperature	-30°C to +70°C
IP rating	IPX7
Certifications	CE
Product type	Adapter cable
Compatible models	Raymarine Axiom RV series

Detailed description

Designed to optimize underwater detection capabilities, the Raymarine A80493 adapter cable allows you to connect two transducers simultaneously to your Axiom RV multifunction display. This unique Y-cable consolidates signals from a DownVision transducer (9-pin connector) and an Airmar 600W transducer (7-pin connector) into a single 25-pin port available on Axiom RV models. This solution simplifies installation and maximizes the use of your chartplotter’s features.

Underwater detection optimization

The A80493 cable enables Axiom RV users to benefit from the combined advantages of DownVision imaging and traditional depth detection. The DownVision technology, particularly found on CPT-60 and CPT-100 transducers, provides a detailed view of underwater structures, wrecks, and fish schools with photographic clarity. Meanwhile, integrating an Airmar 600W transducer via this cable ensures reliable depth detection and improved fish targeting performance at greater depths, complementing seabed analysis. This setup offers greater versatility compared to using a single transducer.

Raymarine Axiom RV compatibility and integration

This cable is specifically designed for Raymarine Axiom RV series multifunction displays, which natively integrate RealVision 3D sonar. It stands out from standard extension or adapter cables by its ability to merge two distinct transducer signal types into a single 25-pin MFD input. Unlike solutions requiring external sonar modules or complex converters, the A80493 provides direct and simplified integration, reducing the number of cables and the complexity of the onboard system. It is an essential component for navigators seeking a complete sonar solution on their Axiom RV without compromising data quality.

Documentation

Type	Nom
	FR - Manuel d'utilisation - Câble d'adaptation (9 & 7 broches Câble Y vers 25 broches) sonde Downvision & sonde direct 600W Airmar sur AXIOM RV
	FR - Notice d'installation - Câble d'adaptation (9 & 7 broches Câble Y vers 25 broches) sonde Downvision & sonde direct 600W Airmar sur AXIOM RV
	EN - Notice d'installation - Câble d'adaptation (9 & 7 broches Câble Y vers 25 broches) sonde Downvision & sonde direct 600W Airmar sur AXIOM RV
	EN - Mounting template - Adapter cable (9 & 7-pin Y-cable to 25-pin) Downvision & direct 600W Airmar transducer on AXIOM RV

Expert opinion

Pol CONIN

Digital Manager

« Optimized integration of DownVision and Airmar transducers on Axiom RV »

The Raymarine Y A80493 cable is a targeted technical solution for users of Axiom RV multifunction displays. It resolves the constraint of connecting two different types of transducers to a single port. This cable allows combining a DownVision transducer (9-pin) – essential for detailed structural seabed imaging – and an Airmar 600W transducer (7-pin) – known for its reliable depth and fish detection – on the Axiom RV’s 25-pin connector. This setup is particularly relevant for vessels where space is limited and optimizing MFD inputs is critical. It eliminates the need for additional sounder modules or complex switches, simplifying wiring and system integration. It is imperative to verify the pin compatibility of your existing transducers to ensure correct operation before installation.

Durabilité

Facilité d'installation

Rapport performance / prix

Payment and security

Your payment information and data are processed securely.

Adapter cable (9 & 7-pin Y-cable to 25-pin) for DownVision and direct 600W Airmar transducers on AXIOM RV

£85.54 GBP

£85.54 GBP ~~£97.24 GBP~~

Frequently Asked Questions

Need help? Contact us

What is the Raymarine A80493 adapter cable used for?

The Raymarine A80493 adapter cable is designed to connect two transducers simultaneously to a Raymarine Axiom RV multifunction display. It is a Y-cable that merges the signals from a DownVision transducer (with a 9-pin connector) and an Airmar 600W transducer (with a 7-pin connector) into a single 25-pin input for your Axiom RV.

This solution simplifies installation and allows you to optimize underwater detection capabilities by combining different transducer technologies.

Which Raymarine multifunction displays are compatible with this cable?

This cable is specifically designed for multifunction displays in the Raymarine Axiom RV series. These models natively integrate the RealVision 3D sounder, allowing direct and simplified connection of both transducers via the 25-pin port.

Which types of transducers can I connect with this A80493 cable?

The A80493 cable allows you to connect two distinct types of transducers:

A DownVision transducer with a 9-pin connector (for example, CPT-60 or CPT-100 models).An Airmar 600W transducer with a 7-pin connector.It is important to note that the cable is designed for this specific combination of connectors (9-pin and 7-pin).

Does this cable require an external sounder module or a converter?

No, one of the advantages of the A80493 cable is that it provides direct and simplified integration. It is specifically designed for Axiom RV displays that already include the RealVision 3D sounder. This means there is no need to use external sounder modules or complex converters to merge the signals from both transducers.

How does this cable improve my underwater detection capabilities?

The A80493 cable combines the benefits of two distinct sonar technologies:

The DownVision technology (via the 9-pin transducer) provides highly detailed imaging of underwater structures, wrecks, and fish schools with near-photographic clarity.The Airmar 600W transducer (via the 7-pin transducer) ensures reliable depth detection and accurate fish targeting at greater depths.This combination delivers enhanced versatility and a more comprehensive analysis of the seabed compared to using a single transducer, optimizing your underwater detection experience.

Note: Compatibility depends on your sonar model and its available ports.

Can I use two DownVision transducers or two Airmar 600W transducers simultaneously with this cable?

No, the Raymarine A80493 adapter cable is specifically designed to combine a DownVision transducer (9-pin) and an Airmar 600W transducer (7-pin). It has a 9-pin connector and a 7-pin connector at one end, and a single 25-pin connector at the other end for the Axiom RV display. It does not allow connecting two transducers of the same type (e.g., two DownVision transducers or two Airmar 600W transducers).

Is this cable compatible with non-RV Axiom displays?

No, this cable is specifically designed for use with Raymarine Axiom multifunction displays in the RV series. Axiom RV models feature a 25-pin port and include the RealVision 3D sounder required to process combined signals from DownVision and Airmar 600W transducers via this cable. It is not compatible with standard Axiom displays that are not part of the RV series and lack the native RealVision 3D integration required for this type of connection.