SeaTalk NG Female to NMEA2000 (DeviceNet) Male Straight Adaptor

Free pickup point from €150 in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

thanks to our network of approved installers

Find an installer

Support service

Opt for additional installation assistance

Save 14%

Raymarine

A06083

DeviceNet (M) to SeaTalkng (F) adapter

The Raymarine A06083 adapter directly connects a NMEA2000 device with a DeviceNet male connector to a SeaTalkng network via a female connector. It enables integration of third-party NMEA2000-compatible sensors and displays into a Raymarine setup, optimizing compatibility for your navigation system. The product is the adapter only.

Retail priceBenefit from the professional rate

£18.98 GBP

£18.98 GBP ~~£22.10 GBP~~

Shipping calculated at checkout.

In stock

Free pickup point from €150 in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

thanks to our network of approved installers

Find an installer

Support service

Opt for additional installation assistance

Technical specifications

Connector type	DeviceNet (male) to SeaTalkng (female)
Cable type	Adapter cable
Cable length	0.4
Compatible network	NMEA 2000, SeaTalkng
Wired network	NMEA 2000, SeaTalkng
Operating voltage	12
Certifications	CE, IEC 60945
Product type	Network adapter
Compatible models	All NMEA 2000 and Raymarine SeaTalkng compatible devices

Detailed description

The Raymarine A06083 adapter is designed to ensure interoperability between NMEA2000 and SeaTalkng systems. This component allows connecting a device with a male DeviceNet connector (standard NMEA2000) to a Raymarine SeaTalkng network via a female connector. It is a key element for integrating third-party NMEA2000 devices or older Raymarine equipment using the DeviceNet standard into a modern SeaTalkng infrastructure.

Connectivity and Integration

Raymarine’s SeaTalkng system is a proprietary interconnect bus, sharing similarities with the NMEA2000 standard in terms of network principles but using specific connectors and terminology. The A06083 adapter is a direct solution for users who own NMEA2000 sensors, displays, or other devices and wish to integrate them into an existing or newly deployed SeaTalkng network. Unlike SeaTalkng spur cables or backbone cables that connect native SeaTalkng devices, the A06083 acts as a physical bridge between these two network standards. It enables the use of NMEA2000 data richness on a Raymarine network.

Positioning and Compatibility

This adapter differs from more complex protocol converters, such as the Raymarine SeaTalk(1) to SeaTalkng converter (e.g., A06047), in that it does not perform data conversion between fundamentally different protocols. Instead, it adapts the connector type between two similar bus standards (NMEA2000 and SeaTalkng). It is essential for hybrid installations where connector compatibility is the main obstacle to integration. It belongs to Raymarine’s cabling accessories range, offering flexible solutions for expanding and modernizing navigation networks.

Documentation

Type	Nom
	EN - Manuel d'utilisation - adaptateur Devicenet (M) vers STng (F)

Expert opinion

Pol CONIN

Digital Manager

« NMEA 2000 to SeaTalkng integration: the essential adapter »

The Raymarine A06083 adapter is a critical component for integrators and recreational boaters seeking to optimize the connectivity of their navigation system. Its utility lies in its ability to seamlessly integrate existing NMEA2000 equipment or third-party sensors into a Raymarine SeaTalkng network. This is particularly relevant for hybrid systems where a full replacement of NMEA2000 devices would be neither cost-effective nor necessary.

In terms of installation scenarios, the A06083 is ideal for connecting sensors such as depth sounders, GPS units, or wind transducers/vane anemometers using the NMEA2000 standard with a male DeviceNet connector directly to a SeaTalkng T-connector or junction block. Installation is straightforward, akin to a simple plug-and-play operation. However, it is critical to ensure that the SeaTalkng network is properly powered and terminated to guarantee stable data communication.

This product differs from NMEA2000 to SeaTalkng gateways that perform more complex protocol conversions. The A06083 is a pure connector adapter. Therefore, it is essential to verify that the PGN (Parameter Group Number) messages transmitted by the NMEA2000 device are compatible with the data expected by the SeaTalkng system for correct interpretation. The absence of protocol conversion means no latency is introduced by the adapter, ensuring direct data transmission. There are no inherent limitations in the adapter itself, but rather considerations related to data compatibility between connected devices and the proper configuration of the overall network.

Durabilité

Facilité d'installation

Rapport performance / prix

Payment and security

Your payment information and data are processed securely.

DeviceNet (M) to SeaTalkng (F) adapter

£18.98 GBP

£18.98 GBP ~~£22.10 GBP~~

Frequently Asked Questions

Need help? Contact us

What is the Raymarine A06083 adapter used for?

The Raymarine A06083 adapter is designed to ensure interoperability between NMEA2000 and SeaTalkng systems. It allows connecting a device with a female DeviceNet port (NMEA2000 standard) to a Raymarine SeaTalkng network.

What types of connectors does the A06083 adapter have?

The A06083 adapter is equipped with a male DeviceNet connector (NMEA2000 compatible) and a female SeaTalkng connector. The male DeviceNet connector plugs into a female NMEA2000 port, while the female SeaTalkng connector accepts a male SeaTalkng spur cable.

Can I use this adapter to connect a NMEA2000 device to my SeaTalkng network?

Yes, this adapter is specifically designed for this purpose. It allows you to integrate a NMEA2000 device (which has a female DeviceNet port) into your existing or in-progress SeaTalkng network infrastructure.

Does the A06083 adapter convert data between NMEA2000 and SeaTalkng protocols?

No, this adapter does not perform any protocol conversion. It only adapts the physical connector types between the two bus standards (NMEA2000 and SeaTalkng), which share similar network principles. NMEA2000 data is transmitted directly over the SeaTalkng network without conversion.

How to install the A06083 adapter in my navigation system?

To install adapter A06083:

Plug the male DeviceNet connector of the adapter into the female DeviceNet port of your NMEA 2000 device. Connect a male SeaTalkng spur cable (not supplied) into the female SeaTalkng connector of the adapter. This spur cable will then integrate the NMEA 2000 device into the main SeaTalkng backbone.

Is this adapter compatible with older Raymarine SeaTalk(1) systems?

No, the A06083 adapter is designed for interoperability between NMEA2000 and SeaTalkng networks. It is not directly compatible with older Raymarine SeaTalk(1) systems. To connect SeaTalk(1) products to a SeaTalkng network, a specific protocol converter, such as the Raymarine SeaTalk(1) to SeaTalkng (e.g., A06047), is required.

What is the DeviceNet standard mentioned for this adapter?

DeviceNet refers to the standardized physical connector type used for NMEA2000 networks. The A06083 adapter uses a male DeviceNet connector to plug into the female ports of NMEA2000 devices, ensuring a physically compliant connection to this standard.

Do I need to add additional SeaTalkng terminators when using this adapter?

The A06083 adapter itself is considered a spur component and does not require specific terminators. However, it is imperative that your main SeaTalkng backbone is properly terminated at both ends with dedicated SeaTalkng terminators to ensure reliable data transmission and prevent communication errors.