i50 Depth Sounder Display

The Raymarine i50 Depth display is a navigation instrument specifically designed to accurately display seabed depth. It is ideal for securing your navigation, particularly in areas with large tidal ranges or shallows.

The display has compact dimensions of 110 x 115 x 44 mm (width x height x depth). Its design allows for perfect flush mounting on your boat's console or dashboard.

Yes, this instrument is designed for harsh marine environments. It benefits from IPX6 waterproofing, which effectively protects it against sea spray and high-pressure water jets.

Absolutely. The screen features very large digits and offers excellent viewing angles (+70° / -70°), ensuring perfect readability day and night, even when offset from the instrument.

The display manages several essential audible and visual alarms for safety: a shallow water alarm (minimum depth) and a deep water alarm (maximum depth). You can set the thresholds according to your navigation needs.

Yes, you can configure the measurement unit according to your preferences during user calibration. The display allows depth to be shown in meters (m), feet (ft), or fathoms (fa).

Yes, it has adjustable backlight. Furthermore, if connected to a SeaTalk NG network, it can participate in group illumination, allowing synchronization of the backlight level for all your compatible Raymarine instruments.

No, part number E70059 corresponds to the i50 Depth display sold alone (without a sensor). If you do not have an existing transducer, you will need to purchase a compatible depth transducer separately or opt for a complete package.

The i50 Depth is dedicated solely to displaying depth. The i50 Tridata, on the other hand, combines depth, speed (log), and water temperature information on a single screen divided into three zones.

Installation is done by flush mounting. A mounting template is provided to accurately cut your console. The screen is then secured from the front, and the bezel clips on top for a neat finish.

The instrument operates on a 12 V DC (direct current) electrical system. Its tolerated operating voltage range extends from 10 V to 16 V DC.

The device is powered directly via the SeaTalk NG network. Simply supply 12V power to the main SeaTalk NG backbone, which will then distribute power to the display via its spur cable.

Yes, it is imperative to protect the installation. The SeaTalk NG network power cable must be connected to the 12V battery via an inline 5 Amp fuse or an equivalent thermal circuit breaker.

The i50 Depth display has a dedicated connection on the back (spade-type terminals) allowing direct connection of the wires from a compatible Raymarine or Airmar analog depth transducer.

Yes, the display is fully compatible with the NMEA2000 protocol via Raymarine's SeaTalk NG connector. It can thus share depth data with your chartplotters and other NMEA2000 equipment.

Absolutely. The i50 Depth is designed to be backward compatible with the old SeaTalk 1 standard. It has the necessary connector to easily integrate into an older generation instrument network (like the ST60 series).

The display is compatible with numerous Raymarine and Airmar analog transducers, such as the P17, P319, P79 (In-hull), B17, B45, or P66 models. You can use thru-hull, in-hull, or transom mount transducers.

Yes. If the depth transducer is connected to another instrument or a sounder module on the network, the i50 Depth will automatically configure itself in Repeater mode to display data received via the SeaTalk NG or SeaTalk 1 network.

It is recommended to use only a clean, damp cloth to wipe the screen. Never use abrasive, acidic, ammonia-based, or solvent-based products, as they could damage the screen's coating and compromise its waterproofing.