ROKK Mini Kit - Flat smartphone mount adhesive kit

Installing the ROKK Mini Kit is straightforward and requires no drilling. For the adhesive mount (part RLS-404), you must first thoroughly clean the mounting surface. It must be clean, polished, and non-porous. Once the surface is prepared, remove the protective film from the adhesive and apply the mount with firm pressure for a few seconds. For the phone clamp (part RL-509), use the 5 mm Allen key provided in the kit to attach it to the mount. The assembly is designed for flush mounting on a smooth surface.

Yes, the ROKK Mini’s adhesive mount can be installed on a gelcoat surface, provided it is clean, polished, and non-porous. Gelcoat is a suitable surface, but it must be thoroughly cleaned and degreased before applying the adhesive to ensure a durable bond.

The ROKK Mini Kit is designed to accommodate most smartphones on the market. The clamp (part RL-509) is adjustable and can fit different phone widths. For very large smartphones or models with thick cases, it is recommended to check your device's dimensions before purchasing. The product is specifically intended for smartphones, not tablets.

The ROKK Mini Kit is compatible with most smartphones, including the iPhone 14 Pro Max. The clamp is designed to securely hold standard to large-sized phones. However, if you use a thick case, check that the phone with the case fits properly in the clamp before purchasing.

Yes, the Samsung Galaxy S23 Ultra is compatible with the ROKK Mini Kit. The adjustable clamp can fit the width of this model. As with any large smartphone, ensure your phone (with or without a case) can be inserted easily into the clamp for optimal grip.

The adhesive mount (part RLS-404) is designed for permanent attachment. The adhesive is very strong and, once applied to a clean and polished surface, it is not intended to be removed easily. If you need a removable solution, Scanstrut offers other suction cup mounts in its product range.

Yes, the ROKK Mini Kit is designed for marine use and can be used outdoors, for example in the cockpit. The materials used by Scanstrut are resistant to marine conditions (UV, salt, humidity). However, it is recommended not to expose your smartphone directly to the elements, as the product is a mount, not a waterproof case.

Yes, the smartphone clamp (part RL-509) is designed to be adjustable. Once attached to the adhesive mount, you can tilt your phone for optimal visibility. The ball-joint system allows you to switch the device between portrait and landscape mode as needed.

Yes, provided the wooden surface is clean, polished, and non-porous. Varnished or lacquered wood meets these criteria. Avoid raw or porous wood, as the adhesive may not bond properly. Clean the area thoroughly before installation to ensure optimal adhesion.

Yes, the ROKK Mini Kit is supplied with a detailed installation manual. It describes the steps for surface preparation, adhesive mount attachment, and clamp assembly. The instructions are clear and illustrated for ease of installation.

The ROKK Mini kit is designed to support the weight of a standard smartphone. Scanstrut does not provide a specific load capacity, but the product is tested for marine use with common phone sizes. For very large smartphones or heavy accessories, it is recommended not to exceed the weight of a typical phone (approximately 250–300 g).

The ROKK Mini Kit is primarily designed for marine use, but it can technically be used on other flat and smooth surfaces, such as a motorcycle dashboard or bicycle handlebars, provided the surface is clean and non-porous. However, Scanstrut does not guarantee its use under intense vibration conditions. For land use, ensure the adhesive holds properly.

For optimal adhesion, the mounting surface must be clean and polished. Use a soft cloth and a degreasing cleaner (such as isopropyl alcohol) to remove any traces of grease, dirt, or wax. Allow it to dry completely before applying the mount. Avoid rough or porous surfaces.

Yes, the ROKK Mini clamp can generally accommodate a phone with a thin case. However, very thick cases or textured cases may reduce the grip capacity. It is advisable to test inserting your phone with its case into the clamp to ensure it holds securely.

Yes, Scanstrut products are designed to withstand marine conditions. The mount and clamp are made from materials resistant to UV, corrosion, and salt water. This ensures a long service life even in a nautical environment. However, the product is not a waterproof case for your phone.

The full part number for the ROKK Mini Kit is RLS-509-404. If you need spare parts, the smartphone clamp is part RL-509 and the adhesive mount is part RLS-404. You can order these parts separately from your Scanstrut dealer.