MultiPlus 24/3000/70-16

Victron Energy’s MultiPlus 24/3000/70-16 is a versatile inverter-charger. It combines a 3000 VA pure sine wave inverter, a 70 A battery charger with adaptive charging technology, and a 16 A fast AC transfer switch in a single compact unit. It is designed for efficient energy management and continuous power supply in marine, mobile, or off-grid systems.

The MultiPlus 24/3000/70-16 converter provides a continuous output power of 3000 VA. It can also handle a peak power of 6000 W. The output voltage is 230 V AC at 50 Hz, with a maximum efficiency of 93-94%.

The MultiPlus 24/3000/70-16 integrates a 70 A battery charger. It uses a four-stage adaptive charging algorithm (bulk – absorption – float – storage) that intelligently adjusts to the battery's condition to prevent overcharging and extend its lifespan.

This MultiPlus model is specifically designed to operate with a 24 V battery system.

The MultiPlus 24/3000/70-16 features a fast 16 A AC transfer switch. This function ensures uninterrupted AC power (UPS function). In case of a mains or generator failure, it automatically switches to the inverter in under 20 milliseconds, ensuring continuous power to sensitive equipment.

The PowerControl function optimizes the management of limited AC power sources. It automatically reduces the battery charging current to prevent overloading generators or shore power connections, taking into account other power consumers.

The PowerAssist feature is a unique function that complements the capacity of a limited AC source (such as a generator or a low-amp shore power connection). During peak demand, the MultiPlus adds inverter power from the battery. When the load decreases, excess energy is used to recharge the battery, allowing high-power appliances to be used even with limited power supply.

Yes, this MultiPlus has two AC outputs:

A main output with « no-break » function (uninterrupted power supply).A second auxiliary output that is active only when AC power is available. This output is ideal for non-priority loads, such as an electric water heater, which should only operate if the generator is running or if shore power is connected.

Yes, it is possible to configure three MultiPlus 24/3000/70-16 units for a three-phase output. Additionally, up to 6 sets of three units can be connected in parallel to provide inverter power of up to 45 kW / 54 kVA and a charging capacity of more than 1000 A.

The MultiPlus uses a four-stage adaptive charging algorithm: bulk (rapid charge), absorption, float (maintenance), and storage. This microprocessor-controlled battery management system intelligently adjusts to the battery's condition to optimize the charging process and extend battery lifespan.

BatterySafe mode is a feature that prevents damage caused by excessive gas release. If a high charging current is combined with a high absorption voltage to charge a battery quickly, the MultiPlus automatically limits the rate of voltage increase once the gassing voltage has been reached.

Storage mode activates when the battery has not been discharged for 24 hours. In this mode, the float voltage is reduced to 2.2 V/cell (13.2 V for a 12 V battery) to minimize gassing and corrosion of the positive plates. Once a week, the voltage is raised to the absorption level to 'equalize' the battery, preventing electrolyte stratification and sulfation—major causes of early battery failure.

Yes, a temperature sensor is supplied with the product. It reduces the charging voltage when battery temperature rises. This feature is particularly important for maintenance-free batteries, which could otherwise dry out due to overcharging, and helps extend their lifespan.

The voltage sense function compensates for voltage drop caused by the resistance of the connecting cables. By measuring the voltage directly on the DC bus or at the battery terminals, the MultiPlus ensures the correct charging voltage is applied to the battery, guaranteeing optimal charging.

Yes, models with a 16 A transfer capacity, such as the MultiPlus 24/3000/70-16, are equipped with a programmable relay. By default, it is configured as an alarm relay, but it can be programmed for various other applications, such as automatic generator start.

Yes, MultiPlus models with a 16 A transfer capacity, such as this one, are equipped with a programmable analog/digital input/output port. These ports can be used for various purposes, including communication with the BMS (Battery Management System) of a lithium-ion battery.

For correct installation, ensure the equipment is operated under suitable operating conditions. Never use it in a damp or dusty environment. It is also essential to allow sufficient free space around the product for ventilation and to ensure that ventilation openings are not blocked. Install the product in a heat-resistant environment, away from chemicals, plastics, curtains, or other textiles.

It is crucial to read the provided documentation carefully. The product is used in combination with a permanent power source (battery), which means a dangerous electrical voltage may be present at the input and/or output terminals even when the equipment is off. Always disconnect the AC power and the battery before performing any maintenance. The product is a Class I safety device and its AC input and/or output terminals must have uninterrupted grounding. All maintenance must be carried out by qualified personnel.

The MultiPlus is supplied ready for use. However, some of its features can be adjusted:

The most important settings can be changed simply using DIP switches. All settings, except for the multifunctional relay, can be modified using a VE.Net panel. All settings can be modified using a PC and free software downloadable from the Victron Energy website.

Yes, the MultiPlus 24/3000/70-16 is highly suited to solar power applications. It can be used in both standalone systems and grid-connected systems. It can use excess solar energy to recharge batteries and, in the event of a grid failure, it can replace the grid to power essential equipment. It also includes a frequency shift function to interact with solar inverters.